• Structural Engineering and Mechanics
• /
• v.32 no.4
• /
• pp.477-488
• /
• 2009

A slip critical joint has various values to adopt the proper slip coefficient in various conditions of faying surfaces in the following codes: AISC, AIJ and Eurocode 3. However, the Korean Building Code still regulates the unique slip coefficient, 0.45, regardless of the diverse faying conditions. In this study, the slip resistance test, including five kinds of surface treatments were conducted to obtain the proper slip coefficients available to steel plate KS SM490A. The faying surfaces were comprised of a clean mill, rust, red lead paint, zinc primer, and shot blast treatment. The candidates for high strength bolts were torque-shear bolts, torque-shear bolts with zinc coating, and ASTM A490 bolts. Based on the test results, the specimens with a shot blasted surface and rusted surface exhibited $k_s$, 0.61, and 0.5, respectively. It is recommended that the specimens with zinc primer exhibit $k_s{\geq}0.40$. The clean mill treated surface had prominently lower values, 0.27. For red lead painted treatment, the thickness of the coating affects the determinant of slip coefficient, so it is necessary to establish a minimum $k_s$ of 0.2, with a coating thickness of 65 ${\mu}m$. During 1,000 hours of relaxation, the uncoated surfaces exhibited the loss of clamping force behind 3%, while the coated surfaces within a certain limited thickness exhibited the loss of clamping within a range of 4.71% and 8.37%.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.4
• /
• pp.40-45
• /
• 2022

The electrical/thermal stabilities and magnetic field controllability of a no-insulation (NI) high-temperature superconducting magnet are characterized by contact resistance between turn-to-turn layers, and the contact resistance characteristics are determined by properties of conductor surface and winding tension. In order to accurately predict the electromagnetic characteristics of the NI coil in a design stage, it is necessary to control the contact resistance characteristics within the design target parameters. In this paper, the contact resistance and critical current characteristics of a rare-earth barium copper oxide (REBCO) conductor were measured to analyze the effects of surface treatment conditions (roughness and oxidation level) of the copper stabilizer layer in REBCO conductor. The test samples with different surface roughness and oxidation levels were fabricated and conductor surface analysis was performed using scanning electron microscope, alpha step surface profiler and energy dispersive X-ray spectroscopy. Moreover, the contact resistance and critical current characteristics of the samples were measured using the four-terminal method in a liquid nitrogen impregnated cooling environment. Compared with as-received REBCO conductor sample, the contact resistance values of the REBCO conductors, which were post-treated by the scratch and oxidation of the surface of the copper stabilizer layer, tended to increase, and the critical current values were decreased under certain roughness and oxidation conditions.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.3
• /
• pp.184-188
• /
• 1996

The Acinetobacter sp. BE-254 isolated from soil sources produced a bioemulsifier in the medium supplemented with n-hexadecane. This bioemulsifier was purified by the procedures of fractionation (ammonium sulfate and chilled acetone), extraction by hexane, and column chromatography on silica gel 60. The results from various color reactions indicated that the bioemulsifier was a glycolipid. The purified emulsifier was very stable at pHs ranging from 4 to 10 and under heat treatment at $100^{\circ}C$ for 30 min. Emulsification activity was also hardly influenced by pH. The critical micelle concentration (CMC) and surface tension at the point ($\gamma_{cmc}$) of the bioemulsifier were approximately 35 mg/l and 30 mN/m, respectively. The bioemulsifier showed a fairly good emulsification activity and stability in comparison with other commercial emulsifiers in the basic formula composed of emulsifier, oil, and water.

• Journal of Families and Better Life
• /
• v.11 no.2
• /
• pp.147-155
• /
• 1993

This study attemps to rethink assumption that the family can be 'a heaven' to everyone in a harsh world through theoretical review Functionalists insist that people feel emotional secure through family life. However this pers-pective sees only the one side of the family experience ignoring the other side of its tension and conflicts in the family. From marxist perspective the family experiences may not be the same among different social classes due to their economic inequality, It might be that middle class family is more likely to experiences emotional secure than any other social class. Feminists have challenged prevalent assumptions about the family. They see that women are oppressed by the family. These results mean that marxist and feminist perspectives compensate for the limitation of functionalism. I'd like to propose that marxist and feminist perspectives can be used framewrok for the family study.

• Steel and Composite Structures
• /
• v.4 no.5
• /
• pp.333-353
• /
• 2004

Strength of reinforced concrete beams can easily be increased by the use of externally bonded CFRP composites. However, the mode of failure of CFRP strengthened beam is usually brittle due to tension-shear failure in the concrete substrate or bond failure near the CFRP-Concrete interface. In order to improve the ductility of CFRP strengthened concrete beams, critical variables need to be investigated. This experimental and analytical research focused on a series of reinforced concrete beams strengthened with CFRP composites to enhance the flexural capacity and ductility. The main variables were the amount of CFRP composites, the amount of longitudinal and shear reinforcement, and the effect of CFRP end diagonal anchorage system. Sixteen full-scale beams were investigated. A new design guideline was proposed according to the effects of the above-mentioned variables. The experimental and analytical results were found to be in good agreement.

• Journal of the Korean Applied Science and Technology
• /
• v.8 no.1
• /
• pp.55-58
• /
• 1991

Biosurfactant have a low toxicity, good biodegradable, various structure. It can be used for a broad range of purposes in a large variety of different applications. Sorbitol mono alkyl ester synthesized by the Porcine Pancreatic lipase catalyzes transesterification reaction between a sugar alcohol and plant oils. We are examined the surface tension, emusion stability and critical micelle concentration were evaluated. Consequently It has a good properties of biosurfactant.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.3
• /
• pp.39-45
• /
• 1998

In recent years, there has been considerable interest in the development of new functional surfactant including new type of anionic surfactants. Anionic surfactants, ${\alpha}-sulfo$ fatty acids that straight long chain alkyl group having from 12 to 18 carbon atoms, were synthesized with sulfur trioxide-dioxane complex to good yield. Xylitol ${\alpha}-sulfo$ fatty acid esters were obtained by reaction that the acetification and esterification of xylitol, by addition reaction with sodium chloride and hydrolysis respectively. These compounds were a new group of destructible surfactants which readily hydrolyzed and oxidized in natural water reservoirs. Physical properties of these new compounds involved surface tension, critical micelle concentration(cmc), foaming power, emulsion power, and hydrolysis properties, were measured. The cmc values of the compounds by ring method were assumed to $7.0{\times}10^{-3}{\sim}3.0{\times}10^{-2}mol/{\ell}$ range and surface tensions at cmc were $25{\sim}31dyne/cm$ respectively.

• Journal of Welding and Joining
• /
• v.13 no.2
• /
• pp.115-121
• /
• 1995

As the metal transfer in the GMAW process affects the weld quality and productivity, the mechanism of molten formation and detachment has been investigated at various welding conditions. The force balance and pinch instability models have been widely used to analyze the metal transfer in the globular and spray modes, respectively A new approach is proposed in this work by minimizing the energy of molten drop system. Effects of the surface tension, gravity, electromagnetic and drag forces are considered with no presumed molten drop geometry. Effects of various welding conditions on the metal transfer are explained. The results show that the proposed mode can be applied to the globular and spray transfer modes. When compared with other models, results of the proposed model show better agreements with the available experimental data, which demonstrates the validity of the present model.

• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.16-22
• /
• 2006

Process contract has received considerable attention in silk degumming processes because of its critical role in quality assurance. In degumming, process exhibits shrinkage of high twisted yarn and lot-varying behavior, thus increasing the difficulties of reduction by conventional means. This necessitates the application of a package that adapts to changing degumming process, and a new approach involving package degumming is proposed. The gains of this process are prevent of shrinkage by package winding, which is simplified by reduced soft-winding or re-twisting process. The approach is expected to achieve high quality results in conventional process due to its feature of demage by tension and rubbing. Therefore package degumming has many merits such as reduce of pilling and shrinkage, production expenses saving by process contract are expected of the simplified degumming process.

• Textile Coloration and Finishing
• /
• v.8 no.2
• /
• pp.56-63
• /
• 1996

Low-temperature plasma treatment or sputter etching is of interest as one of the techniques to modify polymer surface. In this study, poly(ethylene terephthalate)(PET), nylon 6 and cotton fabrics dyed three black dyes were subjected to low-temperature argon plasma and also sputter etching. In relation to bathochromic effect, the surface characteristics of the treated fabrics and films were investigated by means of critical surface tension, SEM and ESCA measurement. The depth of shade of fabrics more increased by the sputter etching technique than argon plasma treatment. Many microcraters on the fiber surface formed by the sputter etching resulted in increase of surface area of the fiber and wettability, but the hydrophobic group was increased by the results of ESCA analysis. In particular the change in reflective index of the fibers was much more effective than the chemical composition of the fiber surface on increasing of the depth of shade.