• 콘크리트학회논문집
• /
• 제19권3호
• /
• pp.377-383
• /
• 2007

최근 콘크리트의 품질과 구조물의 신뢰성을 향상시키기 위해서 고성능콘크리트의 현장 적용이 늘고 있다. 이러한 고성능콘크리트의 배합 설계 방법으로는 모르타르-굵은골재 2상계 배합 이론과 페이스트-골재 2상계 배합 이론이 있다. 이 중 모르타르-굵은골재 2상계 배합이론은 모르타르의 레올로지 특성을 부여함에 있어 반복적인 실험을 통해서 그 값을 결정해야 하는 문제점을 가지고 있다. 페이스트-골재 2상계 배합 이론은 최적 잔골재율과 단위결합재량과의 관계 및 콘크리트의 충전성을 확보할 수 있는 한계 골재 용적비 등이 고려되어 있지 않아 고성능콘크리트에의 적용 예가 없는 실정이다. 또한 이들 고성능콘크리트의 배합 설계 이론은 일반콘크리트와는 달리 유동성 및 충전성에 중점을 두고 있어 배합 설계에서 강도 특성을 고려하지 않고 있으며, 사용 재료의 단위량은 일반콘크리트와 같이 시행착오법으로 결정하고 있다. 이에 본 연구에서는 고성능콘크리트의 배합 설계에 최대 밀도 이론을 도입하여 사용 골재의 공극이 최소가 되는 최적 잔골재율 산정으로 배합 설계 시 시행착오를 줄이고, 강도를 고려한 최소 단위 결합재량의 결정으로 강도와 유동성을 동시에 만족할 수 있는 합리적이며 간편한 고성능콘크리트의 배합 설계법을 제안하고자 하였다. 연구 결과 본 연구에서 제안된 배합 설계법은 최소 공극을 갖는 최적 잔골재율 사용과 최소 단위 결합재량 이상의 결합재를 사용함으로써 시행착오를 줄일 수 있어 자기충전성을 갖는 고성능콘크리트를 간편하게 제조할 수 있다.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.288-293
• /
• 2016

Purpose: The purpose of this study was to investigate the key factors in designing a three-wheeled two-row soybean reaper (riding type) that is suitable for soybean production, and ensure worker safety by proposing optimal work conditions for the prototype of the designed machine in relation to the slope of the road. Methods: A three-wheeled two-row soybean reaper (riding type) was designed and its prototype was fabricated based on the local soybean-production approach. This approach was considered to be closely related to the prototype-designing of the cutter and the wheel driving system of the reaper. Load distribution on the wheels of the prototype, its minimum turning radius, static lateral overturning angle, tilt angle during driving, and The working and rear overturning (back flip) angle were measured. Based on the gathered information, investigations were conducted regarding optimal work conditions for the prototype. The investigations took into account driving stability and worker safety. Results: The minimum ground clearance of the prototype was 0.5 m. The blade height of the prototype was adjusted such that the cutter was operated in line with the height of the ridges. The load distribution on the prototype's wheels was found to be 1 (front wheel: F): 1.35 (rear-left wheel: RL): 1.43 (rear-right wheel: RR). With the ratio of load distribution between the RL and RR wheels being 1: 1.05, the left-to-right lateral loads were found to be well-balanced. The minimum turning radius of the prototype was 2.0 m. Such a small turning radius was considered to be beneficial for cutting work on small-scale fields. The sliding of the prototype started at $25^{\circ}$, and its lateral overturning started at $39.3^{\circ}$. Further, the critical slope angle for the worker to drive the prototype in the direction of the contour line on an incline was found to be $12.8^{\circ}$, and the safe angle of slope for the cutting was measured to be less than $6^{\circ}$. The critical angle of slope that allowed for work was found to be $10^{\circ}$, at which point the prototype would overturn backward when given impact forces of 1,060 N on its front wheel. Conclusions: It was determined that farmers using the prototype would be able to work safely in most soybean production areas, provided that they complied with safe working conditions during driving and cutting.

• 펄프종이기술
• /
• 제34권5호
• /
• pp.1-17
• /
• 2002

The immobilization and consolidation of the model coatings based on the plastic pigment and latex binder of known particle sizes were theoretically Studied in terms of the dense random packing of binary spheres and varying extent of latex film shrinkage. The porosity of the model coatings was calculated based on three proposed latex shrinkage models: Maximum, Minimum, and Linearly Decreasing Latex Shrinkage. The increasing extent of latex shrinkage was calculated up to the critical pigment volume concentration(CPVC) as a function of plastic pigment volume fractions, and the maximum latex shrinkage was estimated from the CPVC. Also, the number of pores and the average equivalent spherical pore diameters were calculated based on those proposed models. The opacity and gloss of the model coatings on polyester films were measured and their porosity was also determined by a simple coat weight-thickness method. As expected, various coating structure-property-composition relationships, such as opacity, gloss, porosity, etc., were shown to exhibit sharp transitions near the CPVC. The CPVC values determined by the opacity, gloss, and porosity vs. PVC relationships, respectively, agreed very well with each other. Especially, the CPVC's determined by the opacity and porosity vs. PVC curves were identical. The comparison between the theoretically calculated and experimental porosity values showed that the intermediate value between the maximum and minimum latex shrinkage would best fit the experimental porosity data. The effect of plastic pigment particle size on the optical properties and porosity of model coatings was also studied and it was observed that the coating opacity and porosity increased with increasing plastic pigment particle size, but the gloss decreased. The ink gloss of the uncalendered model coatings applied onto commercial sheet offset coated papers was shown to be affected by both the coating gloss and porosity: the higher the coating gloss, the higher the ink gloss, but the higher the coating porosity, the lower the ink gloss. Their printability was also studied in terms of the number of passes-to-fail and the rate of ink setting as a function of both plastic pigment volume fractions and plastic pigment particle sizes. A minimum crack-free temperature(MCR) of latex-bound coatings was proposed to better predict the behaviors of latexes as coating binders. The wet state of model coating dispersions, the surfaces of consolidated model coatings, and their internal structure were examined by both electron and atomic force microscopy, and their micrographs were found to be consistent with our immobilization and consolidation models.

• KIEAE Journal
• /
• 제15권2호
• /
• pp.19-26
• /
• 2015

Purpose: Maximizing human comfort in design of medical environments depends immensely on specialized architects particularly critical care design; the study proposes Evidence-Based Design as an apparent analog to Evidence-Based Medicine. Healthcare facility designs are substantially based on the findings of study in an effort to design environments that augment care by improving patient safety and being therapeutic. On SPSS (Statistical Package for Social Science) t-test is applied to simulate two independent variables of PDR (Pre Design-Research) and POE (Post- Occupancy Evaluation). PDR is conducted on relatively new hospital Hallym University Dongtan Sacred Heart Hospital to analyse visibility from researchers' point of view, here the ICU is arranged in I-Shape. POE is applied on Dongguk University Ilsan Hospital to simulate walking on LogWare where two NS are designed based on L- Shape and Seoul St. Mary's Hospital, The Catholic University of Korea where five NS are functional for ICU Intensive Care Unit, Surgical Intensive Care Unit (SICU), Medical Intensive Care Unit (MICU), Critical Care Unit (CCU), Korean Oriental Medical Care Unit which are mostly arranged in U-Shape, and walking pattern is recognized to be in a zigzag path. Method: T-Test is applied on two dependent communication variables: walkability and visibility, with confidence interval of 95%. This study systematically analyses the Nurse Station (NS) typo-morphology, and simulates nurse horizontal circulation, by computing round route visits to patient's bed, then estimating minimum round route on LogWare stop sequence software. The visual connectivity is measured on depth map graphs. Hence the aim is to reduce staff stress and fatigue for better patients care by minimizing staff horizontal travel time and to facilitate nurse walk path and support space distribution by increasing effectiveness in delivering care. Result: Applying visibility graph and isovist field on space syntax on I- Shape, L- Shape and U- Shape ICU (SICU, MICU and CCU) configuration, I-shape facilitated 20% more patients in linear view as they stir to rise from their beds from nurse station compared to U-shape. In conclusion, it was proved that U-Shape supply minimum walking and maximum visibility; and L shape provides just visibility as the nurse is at pivot. I shape provides panoramic view from the Nurse Station but very rigorous walking.

• 대한지리학회지
• /
• 제39권1호
• /
• pp.13-26
• /
• 2004

본 연구는 상대적 날씨 스트레스 지수로 NET의 적용 가능성을 파악하고자 하였다. 기상청에서 예보하고 있는 기온, 습도, 바람 자료를 이용하여 NET 값의 시공간적 분포 특성을 분석하였다. 여름철 스트레스 지수인 일 최고 NET의 지역별 스트레스 기준값은 바람과 습도보다는 기온의 영향을 받으므로 일 최고 기온의 분포와 유사하다. 겨울철 스트레스 지수인 일 최저 NET의 스트레스 기준값은 산지 지역과 서울 이북 지역에서는 낮은 기온의 영향을. 해안 지역에서는 강한 바람의 영향으로 기준값이 여름철에 비하여 다양하게 나타난다. 스트레스가 강한 날의 발생 빈도는 여름철은 뚜렷한 연변화가 나타나지 않지만, 겨울철에는 1990년대 중반 이후 뚜렷한 증가 경향을 보인다.

• 산업공학
• /
• 제16권4호
• /
• pp.450-462
• /
• 2003

In this paper, we deal with a process and layout design for producing a planned amount of Sikhye in a given limited time period under a reasonable production schedule. We represent a Sikhye production line as a vector N, the element of which denotes the number of tanks required in each process and our objective is to find an appropriate vector which minimizes the total investment cost. We suggest a systematic method for finding an appropriate N and an appropriate layout to N. In detail, first, we decide the required sequence of processes and the required operations for each process and we estimate standard operating times. Second, constructing a precedence diagram, we find a critical path in order to reduce the total production lead time for a batch of Sikhye. Third, given a limited N space, we manage to construct manually each production schedule using both the processing times of the critical operations and transfer times. Finally, we find an optimal vector N which gives a minimum investment cost and meets both the time constraint and quantity constraint. In addition, with the estimated relative size of each tank, we suggest an appropriate conceptual layout design including an expansion area for future demands, based on the span technique used in the field of architectural design.

• 수산해양교육연구
• /
• 제25권2호
• /
• pp.341-348
• /
• 2013

The auditory thresholds for 7 specimens of the sharp toothed eel Muraensox cinerus were measured at 5 frequencies by heartbeat conditioning method using pure tones coupled with a delayed electric shock. The audible range of the sharp toothed eel extended from 80Hz to 300Hz with the best sensitivity around 80Hz and 100Hz. In addition, the auditory thresholds over 200Hz increased rapidly. The mean auditory thresholds of the sharp toothed eel at the test frequencies of 80Hz, 100Hz, 200Hz and 300Hz were 87dB, 86dB, 105dB and 126dB, respectively. Auditory masking was determined for the sharp toothed eel by using masking stimuli with the spectrum level range of about 70~80dB (0dB re $1{\mu}Pa/\sqrt{Hz}$). According to white noise level, the auditory thresholds increased as compared with thresholds in a quiet background noise. The noise spectrum level at the start of masking was distributed at the range of about 64dB within 80~100Hz. Critical ratio ranged from minimum 24dB to maximum 40dB at test frequencies of 80Hz~200Hz.

• Transactions on Electrical and Electronic Materials
• /
• 제15권3호
• /
• pp.159-163
• /
• 2014

More accurate CD (Critical Dimension) control is required for the nanometer-scaled devices. However, since the reflectivity between substrate and PR (Photoresist) becomes higher, the CD (Critical Dimension) swing curve was intensified. The higher reflectivity also causes PR notching due to the pattern of sub-layer. For this device requirement, it was optimized for the thickness, refractive index(n) and absorption coefficient(k) in the bottom anti-reflective coating(BARC; SiON) and photoresist with the minimum reflectivity. The computational simulated conditions, which were determined with the thickness of 33 nm, n of 1.89 and k of 0.369 as the optimum condition, were successfully applied to the experiments with no standing wave for the 0.13um-device. At this condition, the lowest reflectivity was 0.44%. This optimum condition for BARC SiON film was applied to the process for 0.13um-device. The optimum SiON film as BARC to PR and sub-layer could be formed with the accurate CD control and no standing waver for the nanometer-scaled semiconductor manufacturing process.

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.287-294
• /
• 2006

In recent years, capsule endoscope is highlighted for the patient's convenience and the possibility of the application in the small intestine. However, the capsule endoscope has some limitations to get the image of the digestive organ because its movement only depends on the peristaltic motion. In order to solve these problems, locomotion of capsule endoscope is necessary. In this paper, we analyze the locomotive mechanism of earthworm-like robot proposed as locomotive device of capsule endoscope and derive the condition which can Judge the possibility of its mobility using theoretical analysis. Based on a biomechanical modeling and simulation, the critical stroke, that is minimum stroke of the earthworm-like robot to perform motion inside small intestine, is obtained. Also, this derived critical stroke can be validated by the moving test of fabricated earthworm-like robot. Consequently, it is expected that this study can supply useful information to design of earthworm-like robot for mobility of capsule endoscope.

• 대한기계학회논문집A
• /
• 제27권11호
• /
• pp.1949-1957
• /
• 2003

A hybrid finite element analysis was used to analyze the influence of ring gear rim thickness and spline number on the static properties of a planetary gear system with manufacturing errors. Both of these parameters affected the bearing force and critical stress. The effect of changes in the rim thickness on the load sharing between the gears depended on the type of manufacturing error. Ring flexibility improved the load sharing between planetary gears only in systems with planet tooth thickness or planet tangential errors; for other types of error, ring flexibility worsened the load sharing. To improve load sharing, rim thickness and spline number should be controlled within a specific range. The minimum rim thickness limit should be determined considering not only the critical stress but also the load sharing. The effect of the ring gear boundary condition was more apparent in a system with errors than in a normal system.