• Title/Summary/Keyword: Critical Minimum

Search Result 616, Processing Time 0.033 seconds

An Analysis of Dynamic Characteristics of Tilting Pad Thrust Bearings (틸팅 패드 추력베어링의 동특성 해석)

  • 김종수
    • Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
    • /
    • 1997.04a
    • /
    • pp.91-100
    • /
    • 1997
  • In this paper the linearzed stiffness and damping coefficients of tilting pad thrust bearing are calculated by the perturbation method. The coefficients are obtained for a wide range of pivot positions. The effects of exciting frequency and pad mass on stiffness and damping coefficients are investigated. Critical frequencies due to the tilting motions of the pad are presented and are shown to be strongly influenced by the pivot position and pad mass.

  • PDF

Development of a Floating Point Co-Processor for ARM Processor (ARM 프로세서용 부동 소수점 보조 프로세서 개발)

  • 김태민;신명철;박인철
    • Proceedings of the IEEK Conference
    • /
    • 1999.11a
    • /
    • pp.232-235
    • /
    • 1999
  • In this paper, we present a coprocessor that can operate with ARM microprocessors. The coprocessor supports IEEE 754 standard single- and double-precision binary floating point arithmetic operations. The design objective is to achieve minimum-area, low-power and acceleration of processing power of ARM microprocessors. The instruction set is compatible with ARM7500FE. The coprocessor is written in verilog HDL and synthesized by the SYNOPSYS Design Compiler. The gate count is 38,115 and critical path delay is 9.52ns.

  • PDF

Iterative time constraint addition algorithm for the crew scheduling problem

  • Peak, Gwan-Ho
    • Journal of the Korean Operations Research and Management Science Society
    • /
    • v.17 no.3
    • /
    • pp.159-170
    • /
    • 1992
  • The size of time constaints is the critical bottleneck of the Crew Scheduling Problem (CSP). This paper deals with a method to extract the minimum required time constraints by k-shortest path algorithm. These time constraints are added as the "insurance constraints" to avoid the unnecessary tree search, which are very time-consuming procedures, for the integer solutions. The computational results show that the problem size in LP formulation could be reduced by our method.

  • PDF

An analysis on the headway of urban rail transit (도시철도 시스템에서의 운행 시격 분석)

  • Bang, Yung;Kim, Hyung-Hoon;Um, Jung-Kyou;Cho, Yong-Gi
    • Proceedings of the KSR Conference
    • /
    • 2006.11b
    • /
    • pp.1495-1500
    • /
    • 2006
  • A signal system is critical point of transport capacity and train operation in urban rail transit. Today the moving block system by radio is taking place of the fixed block system by track circuit for efficiency and short headway in underground railway and right rail transit. In this study, assuming specification of a train, track and control system, the minimum headway on the moving block system and the fixed block system is researched for the maximum transport capacity.

  • PDF

An Analysis of Dynamic Characteristics of Tilling Pad Thrust Bearings (틸팅 패드 추력베어링의 동특성 해석)

  • 김종수
    • Tribology and Lubricants
    • /
    • v.13 no.3
    • /
    • pp.33-41
    • /
    • 1997
  • In this paper the linearized stiffness and damping coefficients of tilting pad thrust bearing are calculated by the perturbation method. The coefficients are obtained for a wide range of pivot positions. The effects of exciting frequency and pad mass on stiffness and damping coefficients are investigated. Critical frequencies due to the tilting motions of the pad are presented and are shown to be strongly influenced by the pivot position and the pad mass.

Weld Quality Monitoring System Development Applying A design Optimization Approach Collaborating QFD and Risk Management Methods (품질 기능 전개법과 위험 부담 관리법을 조합한 설계 최적화 기법의 용접 품질 감시 시스템 개발 응용)

  • Son, Joong-Soo;Park, Young-Won
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.6 no.2
    • /
    • pp.207-216
    • /
    • 2000
  • This paper introduces an effective system design method to develop a customer oriented product using a design optimization process and to select a set of critical design paramenters,. The process results in the development of a successful product satisfying customer needs and reducing development risk. The proposed scheme adopted a five step QFD(Quality Function Deployment) in order to extract design parameters from customer needs and evaluated their priority using risk factors for extracted design parameters. In this process we determine critical design parameters and allocate them to subsystem designers. Subsequently design engineers develop and test the product based on these parameters. These design parameters capture the characteristics of customer needs in terms of performance cost and schedule in the process of QFD, The subsequent risk management task ensures the minimum risk approach in the presence of design parameter uncertainty. An application of this approach was demonstrated in the development of weld quality monitoring system. Dominant design parameters affect linearity characteristics of weld defect feature vectors. Therefore it simplifies the algorithm for adopting pattern classification of feature vectors and improves the accuracy of recognition rate of weld defect and the real time response of the defect detection in the performance. Additionally the development cost decreases by using DSP board for low speed because of reducing CPU's load adopting algorithm in classifying weld defects. It also reduces the cost by using the single sensor to measure weld defects. Furthermore the synergy effect derived from the critical design parameters improves the detection rate of weld defects by 15% when compared with the implementation using the non-critical design parameters. It also result in 30% saving in development cost./ The overall results are close to 95% customer level showing the effectiveness of the proposed development approach.

  • PDF

Computation of the Critical Lengths of the Vertical Grounding Electrode in Multi-Layered Soil Structures (다층 대지구조에서 수직 접지전극의 임계길이 산정)

  • Kim, Ki-Bok;Joe, Jeong-Hyeon;Lee, Bok-Hee
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.24 no.4
    • /
    • pp.73-80
    • /
    • 2010
  • The grounding impedance is not lowered by expanding the dimension of the grounding electrode, and the length of grounding electrode which shows the minimum value of the grounding impedance for each condition of frequency and soil characteristics is existent, and it is defined as Critical Length. In this paper, a new distributed parameter circuit model considering the condition of the multi-layered soil structures was proposed, and the grounding impedance and critical length of the vertical grounding electrode were analyzed by using the newly proposed simulation model and the MATLAB program. As a consequence, it was found that the effect of the soil structure on the frequency-dependent grounding impedance and critical length of the vertical grounding electrode is significant. It is desirable to consider the soil structure in optimal design of the grounding system.

Core${\cdot}$Quality${\cdot}$Basic Service Factors of Family Restaurants and Differentiation Strategy for Customer Service Management (패밀리 레스토랑의 핵심${\cdot}$고품질${\cdot}$기본서비스 요인과 요인 별 고객관리 차별화 전략에 관한 연구)

  • Park, Jung-Young
    • Journal of the Korean Society of Food Culture
    • /
    • v.23 no.2
    • /
    • pp.184-193
    • /
    • 2008
  • The purpose of this study was to determine the detailed customer satisfaction and dissatisfaction factors of family restaurants in Korea, and to then classify the factors into 3 groups, inlcuding core service, quality service, and basic service. ‘Core service’ represents the critical factors that generate both satisfaction and dissatisfaction; ‘quality service’ generates only satisfaction; and ‘basic service’ generates only dissatisfaction. This categorization is based on Herzberg’s motivation-hygiene theory (1976) as well as Cadotte & Turgeon (1988). Based on the characteristics of the three groups, differentiation strategies in managing customer service were suggested to the family restaurant managers. A qualitative research method, termed the critical incident technique (CIT), was used in the study. This method helps researchers find new factors or attributes by grouping key issues from the anecdotes (critical incidents) and then categorizing common factors from the key issues. This research categorized key satisfiers and dissatisfiers into 33 factors, which were from 402 critical incidents described by 261 respondents. Eleven factors (response to service failures, food taste and quality, attention paid to customers, coupon/mileage point/discount card, customer’s ordinary requests, waiting, food diversity, food price, facility sanitation, checking out, customer’s special requests) were classified into core service, which required maximum management not regarding the level of customer satisfaction. Six factors (employee attitude, event, education and explanation, complementary food, customer’s mistakes, attention paid to children) were classified into quality service, which required differentiation strategy management. Finally, nine factors (speed of food service, employee’s mistakes, food sanitation, atmosphere and interior, seating, forcing orders, parking, other customers, reservations) were classified into basic service, which required minimum management at the level of the industry standards.

Minimum Temperature Mapping in Complex Terrain Considering Cold Air Drainage (냉기침강효과를 고려한 복잡지형의 최저기온 분포 추정)

  • 정유란;서형호;황규홍;황범석;윤진일
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.4 no.3
    • /
    • pp.133-140
    • /
    • 2002
  • Site-specific minimum temperature forecasts are critical in a short-term decision making procedure for preventive measures as well as a long-term strategy such as site selection in fruits industry. Nocturnal cold air pools frequently termed in mountainous areas under anticyclonic systems are very dangerous to the flowering buds in spring over Korea, but the spatial resolution to detect them exceeds the current weather forecast scale. To supplement the insufficient spatial resolution of official forecasts, we developed a GIS - assisted frost risk assesment scheme for using in mountainous areas. Daily minimum temperature data were obtained from 6 sites located in a 2.1 by 2.1 km area with complex topography near the southern edge of Sobaek mountains during radiative cooling nights in spring 2001. A digital elevation model with a 10 m spatial resolution was prepared for the entire study area and the cold air inflow was simulated for each grid cell by counting the number of surrounding cells coming into the processing cell. Primitive temperature surfaces were prepared for the corresponding dates by interpolating the Korea Meteorological Administration's automated observational data with the lapse rate correction. The cell temperature values corresponding to the 6 observation sites were extracted from the primitive temperature surface, and subtracted from the observed values to obtain the estimation error. The errors were regressed to the flow accumulation at the corresponding cells, delineating a statistically significant relationship. When we applied this relationship to the primitive temperature surfaces of frost nights during April 2002, there was a good agreement with the observations, showing a feasibility of site-specific frost warning system development in mountainous areas.

Behaviors of Premixed Flames and Triple Flames with its Concentration Difference in a Slot Burner (슬롯버너에서 농도차이에 따른 예혼합화염과 삼지화염의 거동)

  • Kim, Tae-Kwon;Jang, Jun-Young;Park, Jeong;Jun, Seong-Hwa;Miwa, Kei
    • 한국연소학회:학술대회논문집
    • /
    • 2004.11a
    • /
    • pp.85-90
    • /
    • 2004
  • We have presented characteristics of a transitional behavior from a premixed flame to a triple flame in a lifted flame according to the change of equivalence ratio. The experimental apparatus consisted of a slot burner and a contraction nozzle for a lifted flame. As concentration difference of the both side of slot burner increases, the shape of flame changed from a premixed flame to a triple flame, and the liftoff height is decreased to the minimum value and then increase again. Around this minimum point, it is confirmed a transition regime from premixed flame to triple flame. Consequently, the experimental results of the liftoff height, flame curvature and luminescence intensity showed that the stabilized laminar lifted flame regime is categorized by regimes of premixed flame, triple flame and critical flame. In the visualization experiment of smoke wire, the flow divergence and redirection reappeared in premixed flame as well as triple flame. Thus we cannot express the flame front of lifted flame has a behavior of triple flame with only flow divergence and redirection. To differentiate triple flame and premixed flame, ${\Phi}$ value of partially premixed fraction is employed. The partially premixed fraction ${\Phi}$ was constant in premixed flame. In critical flame small gradient appears over the whole regime. In triple flame, typical diffusion flame shape is obtained as parabolic distribution type due to diffusion flame trailing.

  • PDF