• ETRI Journal
• /
• 제37권2호
• /
• pp.273-282
• /
• 2015

Vehicle-to-grid presents a mechanism to meet the key requirements of an electric power system, using electric vehicles (EVs) when they are parked. The most economic ancillary service is that of frequency regulation, which imposes some constraints regarding the period and duration of time the vehicles have to be connected to the grid. The majority of research explores the profitability of the aggregator, while the perspective of the EV fleet owner, in terms of their need for usage of their fleet, remains neglected. In this paper, the optimal allocation of available vehicles on a day-ahead basis using queuing theory and fuzzy multi-criteria methodology has been determined. The proposed methodology is illustrated on the daily scheduling of EVs in an electricity distribution company.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권1호
• /
• pp.17-30
• /
• 2011

Many domestic manufacturers make reflectors for Lamps of BLU(back light units). However, color change and parting occur as a result of diverse usage environment. Therefore, many of the manufacturers are reluctant in R&D investment of reflectors for Lamps of BLU. Hence, in this article reliability assessment criteria for reflector for lamp of BLU are established in terms of performance test, environment test and life test.

• 대한교통학회지
• /
• 제9권2호
• /
• pp.41-56
• /
• 1991

The aim of this research is designing road lighting installations(arrangement, mounting height spacing and overhang) which produce a certain level and distribution of luminance together with minimal glare. These can be varied over a limited range for a given luminance and road surface to achieve the required installation performance. In Korea there are no code of practice which lays down recommended performance criteria (Lavg, Uo, Ul, G, TI) with practical design guidance on how to achieve them. In case study design rules and current installation of road lighting in daegu city are analysed. The core of research are suggesting a new performance criteria and providing a set of table giving the maximum lognitudinal spacing between successive luminaires. The result of this research prescribes the combination of height and spacing for various road widths and arrangements which will achieve a specified minimum performance on straigt roads for particular luminaire and a particular road surf-ace.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.214-217
• /
• 2005

To improve the safety of facilities and human beings when the ground fault occurs, public power utility prescribes the reasonable ground resistances, measures and controls the ground resistance of all the ground electrodes biennially. Concerning the safety of human, there are two safety criteria widely accepted, i.e. the IEEE Std 80-2000 and the IEC 479-1:1994. The IEEE Std 80-2000 is based on a simplified electric shock model usually translated into permissible touch and step voltages. The IEC 479-1:1994 is less specific than IEEE Std 80-2000 for analysis purpose. The IEC 479-1:1994 provides values of permissible body current against electric shock duration. This paper provides a technical study of these two standards to analyze the safety of human beings of ground electrodes developed recently for distribution power system.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제10권1호
• /
• pp.11-24
• /
• 2010

Lighting industry is rapidly being developed as the ubiquitous society based on sensor network emerges. This kind of paradigm shift brings the society convergence of technologies which leads to smart lighting system as well as the integration of interior and sensibility control. However, standards for sensors have not been firmly established, and problems related to quality and malfunction have been brought up, thereby calling for careful approach to the enhancement and assessment of reliability of the item. In this article reliability assessment criteria for sensor module for lighting fixtures is established in terms of performance assessment criterion and reliability assessment criterion.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2262-2269
• /
• 2010

A recent Tilting train development operation for existing line high speed, already developed "Korean Tilting Train eXpress(bellow TTX)" and that doing demonstration of operation. And TTX are going to commercial service in 2012. They are preparing Environmental Declaration of Product(bellow EDP) for offering environmental impact of TTX to customer. EDP calculated environmental impact of target product's whole life cycle(raw material and manufacturing, distribution, use, end of life) more quantity for that improving environmental impact and then certification them, it is using for that estimate some part of existence of specific pollutants, GHGs, energy consumption and recycling ratio. In this study, 1) analyze the process of getting EDP, 2) satisfy common criteria and each criteria(plan) in the Product Category Rules(bellow PCRs) provided KEITI, 3) according to ISO 14044, implementation of LCA. 4) These results be shown Characterized Impact(bellow CI) about each life cycle stage and six impact categories(ARD, GWP, OD, AD, EU, POC).

• 국제초고층학회논문집
• /
• 제3권2호
• /
• pp.147-154
• /
• 2014

The purposes of this study were to analyze criteria for measurement chamber design dedicated curtain wall, and how to measure of performance configuration and status of the chamber that is currently being used. Main dealing criteria is AAMA 1503-09. Measurement of data is made in curtain wall Mock-up experiment station with thermal imaging camera. Measurement data using thermal imaging cameras at Mock-up curtain was made at the test site. The results of this study were as follows; There is no U-value test method for actual size of curtain wall. The thermal test outdoor chamber showed heat loss in the connection part of indoor and outdoor chamber. And the indoor chamber showed unstable temperature distribution by height.

• Coupled systems mechanics
• /
• 제6권1호
• /
• pp.55-74
• /
• 2017

The evaluation of torsional effects on multistory buildings remains an open issue, despite considerable research efforts and numerous publications. In this study, a large number of multiple test structures are considered with normally distributed topological attributes, in order to quantify the statistically derived relationships between the torsional criteria and response parameters. The linear regression analysis results, depict that the center of twist and the ratio of torsion (ROT) index proved numerically to be the most reliable criteria for the prediction of the modal rotation and displacements, however the residuals distribution and R-squared derived for the ductility demands prediction, was not constant and low respectively. Thus, the assessment of the torsional parameters' contribution to the nonlinear structural response was investigated using artificial neural networks. Utilizing the connection weights approach, the Center of Strength, Torsional Stiffness and the Base Shear Torque curves were found to exhibit the highest impact numerically, while all the other torsional indices' contribution was investigated and quantified.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.409-412
• /
• 2007

A motorcycle helmet is the best means to protect the head of bike's driver and it is directly connected to a driver's life. Prior to producing of the helmet, it has to be passed the process of impact test to evaluate of its safety. This test evaluates peak acceleration and H.I.C (Head Injury Criteria). This paper analyzes impact test with finite element method to find the behavior of helmet during the test. Also, the effect of impact sites on the helmet was evaluated to improve the thickness distribution of the helmet.

• 한국의류학회지
• /
• 제20권6호
• /
• pp.1125-1137
• /
• 1996

The author reviewed seventy papers on social psychology of clothing and fashion marketing fields, which were published in the Journal of the Korean Society of Clothing and Textiles between 1983 and 1996. The market variables and consumer behavior variables were focused on. This review showed that the market variables had been divided into three groups of variables: 1) product variables (product image and product classification): 2) brand variables (brand image and brand positioning): and 3) store variables (store image, store type, and distribution system) Consumer behavior variables have been studied on the basis of EBM Consumer Behavior Model: 1) purchasing motivation as need recognition: 2) information using as search information: 3) evaluation criteria and choice criteria as alternative evaluatioin : 4) clothing purchase, brand choice and store choice as purchase: 5) degree of wear, satisfaction and dissatisfaction as outcome: and 6) clothing discard. Variables that influence on consumer behavior, including situation variables, clothing attitude variables, personal . social variables were added to develop a variable model of clothing consumer behavior using the EBM Consumer Behavior Model.