• 한국유통학회지:유통연구
• /
• 제13권1호
• /
• pp.61-77
• /
• 2008

본 연구는 소비자가 처음으로 접하는 신규 패션 브랜드에 대해 적용시키는 평가기준을 밝히는데 그 목적이 있다. 브랜드 평가기준에 대한 연구로서 다음의 세가지 논점을 강조함으로써 선행연구와 구별되는 차별점을 가진다. 첫 번째로는 본 연구가 개별 제품이나 점포를 포함하는 패션브랜드 수준에 대한 통합적인 평가기준을 밝힌다는 점이다. 두 번째로는 이미 형성된 태도에 의해 영향을 받는 기존 브랜드에 대한 평가기준이 아닌 새로운 브랜드에 대한 최초의 평가기준을 밝히며 본 연구에서의 "신규 브랜드"는 소비자가 처음으로 점포내를 둘러보고 충분한 직접적 정보를 바탕으로 평가를 한다는 점에서 소비자의 관점에서의 새로운 브랜드로 조작적 정의가 되고 있다는 점이다. 마지막으로 전국적으로 유통되는 대부분의 패션 브랜드가 백화점 내에 입점되는 국내의 현실을 고려하여 소비자가 지각하는 백화점과의 관제의 질과 입점되어 있는 신규 패션 브랜드 평가와의 관련성을 분석하였다 오백 삼십 칠 명의 여성 소비자에 대한 온라인 조사를 통해 신규 패션브랜드를 평가하는 평가기준 요인 (상품 파워, 점포 내 커뮤니케이션, 브랜드 및 회사 이미지, 판매원, VMD, 구색의 다양성)을 도출하고 이들이 브랜드 태도에 미치는 영향을 회귀모형을 통해 검증하였다. 또한 백화점 관제질의 차이에 따른 신규브랜드 평가 기준과 브랜드 태도의 관련성도 분석하였다.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 1996년도 정기학술강연회 발표논문 초록집
• /
• pp.42-44
• /
• 1996

Recently due to repeatedly occurrence of flood, a lot of Chinese cities accept new design criteria for their protective project Most of them calculated by a certain type of probability distribution. In order to meet the demand of development economy the return period of design criteria is changed more longer and longer even 1000years, but the data which the calculation dependent on is only about 30-40 years. (omitted)

• 대한전기학회논문지:전력기술부문A
• /
• 제53권9호
• /
• pp.513-520
• /
• 2004

In the paper, we summarize the result of the experimental research for the overload criteria of domestic distribution transformers considering the electric consumption patterns of customers. For the basic characteristic data of distribution transformer overload, the actual experiments are accomplished. The field data of loads are surveyed from sample transformers for analyzing the consumption pattern of customer load. The load data acquisition devices are equipped, and the algorithm of load pattern classification is applied. In addition to this efforts, various load pattern data. in past are gathered. Then the representative load pattern of each customer type in domestic is extracted. The final results of overload criterions are presented as tabular form through the results of experiments and survey are combined. The field test of the experiment results is peformed using the special manufactured transformers, which can measure both the load and top-oil temperature of transformer. Through this, we verify that the results of field test are similar to the laboratory one and the Proposed overload criteria can be effectively applied to the real system.

• Earthquakes and Structures
• /
• 제18권2호
• /
• pp.185-199
• /
• 2020

A computationally-efficient method for multi-criteria optimisation is developed for performance-based seismic design of friction energy dissipation dampers in RC structures. The proposed method is based on the concept of Uniform Distribution of Deformation (UDD), where the slip-load distribution along the height of the structure is gradually modified to satisfy multiple performance targets while minimising the additional loads imposed on existing structural elements and foundation. The efficiency of the method is demonstrated through optimisation of 3, 5, 10, 15 and 20-storey RC frames with friction wall dampers subjected to design representative earthquakes using single and multi-criteria optimisation scenarios. The optimum design solutions are obtained in only a few steps, while they are shown to be independent of the selected initial slip loads and convergence factor. Optimum frames satisfy all predefined design targets and exhibit up to 48% lower imposed loads compared to designs using a previously proposed slip-load distribution. It is also shown that dampers designed with optimum slip load patterns based on a set of spectrum-compatible synthetic earthquakes, on average, provide acceptable design solutions under multiple natural seismic excitations representing the design spectrum.

• 유통과학연구
• /
• 제12권12호
• /
• pp.5-17
• /
• 2014

Purpose - The purpose of this study is to examine the possible ways to minimize damage by analyzing the influence that may be exerted upon the business process of the distribution industry by unexpected climate change. Research design, data, and methodology - The optimum business process is to be implemented after dividing the diversified business process of the distribution industry into the four stages of the Business Continuity Plan (BCP). Results - First, the upper-level risks that would be impacted most sensitively by climate change have been selected. Second, the impact and characteristics of the environment have been discovered. Third, weighted values by criteria item of upper-level business risks have been analyzed. Fourth, it was possible to define the business priority order based on the individual and then to adjust the Recovery Time Objective (RTO). Conclusion - In this study, the priority order has been defined quantitatively by calculating the priority order score. Further, the priority order has been determined depending on whether any targeted business unit is applicable to the items of the business nature criteria.

• 환경영향평가
• /
• 제4권2호
• /
• pp.71-91
• /
• 1995

In order to develop an appropriate set of criteria applicable for environmental impact assessment (EIA) of natural forest 8 items are proposed. The criteria are vegetation distribution area (DA), distribution pattern (DP), size (S), diameter of breast height of tree (DBH), humus (H), sustainment (ST), successional stage (SS) and impact of adjacent ecosystem (IAE), Each criterion has an interval which minimum 1 score to maximum 5 score Forest Evaluation Index (FEI) was obtained as the sum of 8 criteria value. Above 70% is considered to be absolutely conservative and from 50% to 70% range of total score is to be considered conservative. In the case of the Sancho˘ng Pumping-up Power Plant of Mt. Chiri, 8 criteria were applied base on actual vegetation map. Pinus densiflora community got 73%(29 scores) and Quercus variabilis - Q. serrata community got 60%(24 scores). This may be said that this local vegetation has high ecological potentiality. These criteria cannot always be absolutely evaluation tool. So it is expected to take the more time to be developed further, and holistically added by the other field such as fauna, geological feature etc.

• 조명전기설비학회논문지
• /
• 제21권9호
• /
• pp.87-94
• /
• 2007

This paper presents new criteria for DGA(Dissolved Gases Analysis) using CDF(Cumulative Distribution Function) obtained from the data from the diagnosis of transformers operated in KEPCO over a period of 16 years. Because of differences in operating environments, construction type, oil volume, and other factors, the interpretative criteria of DGA at KEPCO differs from other standards such as IEC-60599, or Rogers and Doernenburg. To suggest the most appropriate criteria, the DGA data from transformers under normal conditions as well as from developing fault transformers were collected. Using these data, this study suggests the limitative gas level of transformers under normal operating conditions and verifies the suitability of the criteria. Because the application of this new criterion to transformers at KEPCO increases the detectable ratio of incipient faults and reduces unnecessary follow-up sampling and analysis, the new criteria yields a more reliable prediction of transformer condition.

• 유통과학연구
• /
• 제18권7호
• /
• pp.63-72
• /
• 2020

Purpose: This study examines the market segmentation and strategy of PT INKA, a rolling stock manufacturer in Indonesia. Research design, data and methodology: The study used the MCDM (Multiple Criteria Decision Making) method specifically the AHP (Analytical Hierarchy Process). The AHP method was applied to identify the target market. This method or approach considers the market attractiveness and competitive strength criteria with quantified parameters. Results: a) Australia, Kenya, Tanzania, New Zealand, and India emerge as the top five target markets; b) There is justification for rolling stock manufacturers to allocate their resources in winning the market share. Conclusion: The main challenge confronting the rolling stock manufacturer is limited resources to acquire a particular market share despite abundant opportunities in this sector. Despite the mastery of technology and long experience in the industry, selecting a target market with multiple criteria could be difficult for an emerging rolling stock manufacturer in South East Asia.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.509-512
• /
• 2003

Critical Path Mettled(CPM)은 공정을 계획하고 관리하는데 효과적인 도구이다. CPM의 장점 중 한 가기는 여유시간(Float)을 계산할 수 있다는 것이다. 여유시간은 프로젝트 전체의 공기에 영향을 주기 않고 연장할 수 있지만 공정관리 상의 부산물이기 때문에 소유권에 대한 개념과 범위가 명확하지가 않다. 때문에 사업참여자들이 여유시간을 사용할 때에는 이해관계가 얽혀있어 많은 분쟁을 일으켰다. 이를 해결하기 위해 여유시간 분배와 소유권에 대한 연구가 진행되어 왔으나 여유시간 분배의 기준을 전체 공정에 대한 비율에 두고 있어 합리적인 분배가 이루어지기 못했다. 따라서 본 연구에서는 여유시간 활용목적에 대해 분석한 결과를 기반으로 하여 여유시간 분배 기준을 공기지연 리스크로 제시하였고, 소유권의 개념을 적용시키기 위해 사업참여자 주체별로 공기지연 리스크인자를 구분하였다. 또한 공기지연 리스크인자가 전체 공정에 대해 일률적으로 영향을 끼치는 것이 아니기 때문에 공종에 따라 공기지연 리스크인자들의 영향력을 평가하기 위한 Framework을 구축하였고, 평가를 위한 방법과 기준을 활용할 수 있는 분배방법을 제시하였다.

• 환경영향평가
• /
• 제5권2호
• /
• pp.33-47
• /
• 1996

To select the criteria, literature review was made in the quantitative case of conservation biology, foreign country's EIA and domestic ecology. Among them, a few factors was extracted. To applicate the criteria to domestic forest ecosystem, expert opinion survey was executed to the ecologist. The results were summarized as follows; 1. Classification of sites was made of land use system which is related to forest ecosystem or forest conservation. Sites are divided into 3 categories which are nature preservation area, seminature preservation area and urbanized area. Evaluation criteria is consisted of rarity and naturalness. 2. Each area had different criteria composition according to the site characteristics. Criteria of nature preservation area is rarity in the broad sense (distribution pattern of vegetation), vegetation size, successional stage and depth of organic matters. Those of seminature preservation area are rarity in the broad sense (distribution area of vegetation), vegetation size, successional stage, diameter at breath height and depth of organic matters. And those of urbanized area are vegetation distribution in area, successional stage, age of forest and diameter of breath height. The basic data of criterion was gathered by field survey. 3. Evaluation index and total naturalness index was obtained by adding the each criterion. It is made up of two categories-rarity and naturalness. TNi is divided into 3 grades. Grade I is more than 70% for TNi, grade IT is 50~70%, and grade III is below 50%. According to the each grade, permitted action and facilities were suggested.. This research just focuses on the evaluation of vegetation quality and the assessment results do not directly judge conservation or development. To make better evaluation criteria, various fields of forest ecosystem-geological or physical nature environment and fauna ecosystem etc. -will be added wholly to this research.