• Journal of Environmental Impact Assessment
• /
• v.7 no.1
• /
• pp.49-61
• /
• 1998

Zoning areas within national parks in Korea are classified into Natural Preservation Zone(NPZ). Natural Environment Zone(NEZ), Settlement Zone(SZ) and Mass Facility Zone(MFZ) based on the Natural Park Act Large-scale development which might cause permanent destruction of natural resources are being done in NEZ which covers 90% of the total natural park area. Thus it is necessary to examine National Park Act which refers the authorized criteria and development activities of NEZ. However, the current environmental impact statement(EIS) does not cover the full impact of the development inside the national park area. Based on these concepts, the study examines the appropriate resources to distinguish the NPZ and NEZ in Mt. Teogyu National Park, then compare the distribution of resource characteristics between two area by using GIS. Through this study, the conclusions are as follows; (1) In terms of scenic resource analysis, the current NPZ does not meet the criteria on the National Park Act Rather, most of the resources which should be located within the NPZ are located within the NEZ. (2) In terms of elevation analysis, Mt. Teogyu National Park, most of NPZ are located on high altitude which is more than l,200m above the mean sea level. Therefore, it shows the elevation is the only criteria for distinguishing NPZ and NEZ. (3) In terms of Degree of Green Naturality(DGN), the second forest areas, the eighth grade of DGN in Mt. Teogyu National Park are distributed much more in the NEZ than NPZ. (4) After examining five factors - scenic resources, elevation, slope and DGN, vegetation- it was found out that zoning of Mt. Teogyu National Park is not adequatly designated. Zoning of national parks should be accomplished based on the precise inventory of the current resources.

• Transactions of the KSME C: Technology and Education
• /
• v.2 no.2
• /
• pp.89-97
• /
• 2014

The diesel driven power generation facility provides most of electricity of island region where is isolated from the main land power supply system. It is possible to extend the life of diesel driven power generation facility by periodic maintenance. However, the long-term use of diesel driven power generation facility increases the operating cost due to aging hardware and reduced plant efficiency. In other words, on-time replacement of aging diesel driven power generation facility reduces plant operation cost. The purpose of this study presents major indicators to represent the characteristics of the diesel generator and conducts sensitivity analysis using Monte Carlo analysis. In addition, status core which indicates quantitatively the state of the diesel driven power generation facility is defined and prepare the replacement criteria based on the state score.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.4
• /
• pp.77-84
• /
• 2022

The purpose of this study is to derive implications by comparing the spatial distribution of each service facility per unit population(1,000 people) with population decline areas. For this purpose, major concepts such as living infrastructure services, Spatial Distribution of Rural Living Service Facilities, areas of declining population, and regional extinction were reviewed and trends in prior research. Based on the literature review, 'Spatial Distribution of Rural Living Service Facilities' analysis criteria were set, and it was derived by 'the number of facilities per 1,000 population by township' using population data and rural space data. And the trend of each service sector was identified and implications were derived with 89 cities and counties in 'depopulation areas' suggested by the Ministry of Public Administration and Security. The derived implications are as follows. In the medical, leisure, and sports infrastructure sectors, 'rural areas with few service facilities per unit population' and 'depopulated areas' tended to coincide. In addition, the distribution characteristics of rural and urban areas differed by sector, which is judged to depend on the inclusion of rural facilities and population density.

• Structural Engineering and Mechanics
• /
• v.53 no.4
• /
• pp.703-723
• /
• 2015

In this paper optimization of volume fraction distribution in a thick hollow cylinder with finite length made of two-dimensional functionally graded material (2D-FGM) and subjected to steady state thermal and mechanical loadings is considered. The finite element method with graded material properties within each element (graded finite elements) is used to model the structure. Volume fractions of constituent materials on a finite number of design points are taken as design variables and the volume fractions at any arbitrary point in the cylinder are obtained via cubic spline interpolation functions. The objective function selected as having the normalized effective stress equal to one at all points that leads to a uniform stress distribution in the structure. Genetic Algorithm jointed with interior penalty-function method for implementing constraints is effectively employed to find the global solution of the optimization problem. Obtained results indicates that by using the uniform distribution of normalized effective stress as objective function, considerably more efficient usage of materials can be achieved compared with the power law volume fraction distribution. Also considering uniform distribution of safety factor as design criteria instead of minimizing peak effective stress affects remarkably the optimum volume fractions.

• Journal of Food Hygiene and Safety
• /
• v.35 no.6
• /
• pp.552-560
• /
• 2020

Listeria monocytogenes is a highly pathogenic gram-positive bacterium that is easily isolated from cheese, meat, processed meat products, and smoked salmon. A zero-tolerance (n=5, c=0, m=0/25 g) criteria has been applied for L. monocytogenes in cheese meaning that L. monocytogenes must not be detected in any 25 g of samples. However, there was a lack of scientific information behind this criteria. Therefore, in this study, we conducted a risk assessment based on literature reviews to provide scientific information supporting the baseline and to raise public awareness of L. monocytogenes foodborne illness. Quantitative risk assessment of L. monocytogenes for cheese was conducted using the following steps: exposure assessment, hazard characterization, and risk characterization. As a result, the initial contamination level of L. monocytogenes was -4.0 Log CFU/g in cheese. The consumption frequency of cheese was 11.8%, and the appropriate probability distribution for amount of cheese consumed was a Lognormal distribution with an average of 32.5 g. In conclusion, the mean of probabilities of foodborne illness caused by the consumption of cheese was 5.09×10-7 in the healthy population and 4.32×10-6 in the susceptible population. Consumption frequency has the biggest effect on the probability of foodborne illness, but storage and transportation times have also been found to affect the probability of foodborne illness; thus, management of the distribution environment should be considered important. Through this risk assessment, scientific data to support the criteria for L. monocytogenes in cheese could be obtained. In addition, we recommend that further risk assessment studies of L. monocytogenes in various foods be conducted in the future.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.5-11
• /
• 2016

Purpose - The Education Ministry has plans to select top 10 percent academic journals among the domestic registration journals in NRF(National Research Foundation of Korea), and designate them as outstanding academic journals. To reflect this trend, KODISA has set its sights on paper publication rate and citation index with pushing forward globalism. First, this study will arrange the process of globalism and the current state of paper submission, and propose the direction of improvement in academic journals through understanding the characteristics of each major field. Research design, data, and methodology - KODISA has preceeded in examining and publishing research papers related to distribution field through indirectly or stimulating academic advancement. KODISA covers the whole fields in social science as well as in business administration and economics that associated with distribution field not limiting only within the range of distribution field. That is, the new subject that contributes to the progress in distribution field with original research can be a priority criteria in KODISA journal publication. Results - The major fields in papers published in KODISA can be categorized broadly as distribution field with economic and business administration point of view. Therefore, the distribution field with economic point of view includes the issues such as regulations, system, industry, market environment, distribution system, trade, and macroeconomics, etc. The business administration point of view in distribution includes distribution strategy, distribution organization, and distribution channel from the perspectives of the firm, etc. Conclusions - The aim of KODISA in 2020 is to be a global academic journal as SCI level of each journal in KODISA, JDS(Registration journal), IJIDB(Registration candidate), EAJBM(Registration candidate), JAFEB(Cabell's Registration journal). The KODISA journals have already settled as the largest academic society and journals of Korea in 2016 currently from humanities and social sciences area by the most gross in publication circulation, volumes, and types. Hereafter, KODISA will focus on the improvement for the objective indicators such as Impact Factor and Centrality index as qualitative growth as well as quantitative expansion. By doing so, KODISA will be a forum for developmental academic debate with attracting the world's greatest scholars' papers. Furthermore, they will be recognized journals and grow as the first-rate academic journals inside and outside of Korea.

• Journal of Distribution Science
• /
• v.14 no.1
• /
• pp.85-91
• /
• 2016

Purpose - Recently, the importance of rapid change in business models is more and more increasing as the change of information technology environment. Therefore, a variety of business models have emerged. On the other hand, there is no company that can generate revenue. Many enterprises are still maintained while they are changing only their appearance of the business model. Business model is important in e-commerce. However, a lot of researches are targeted only in Web sites. Thus, e-commerce companies do not have the infrastructure for measuring and business models. The purpose of paper is to evaluate factors which are related with the structuring of the e-commerce success. And it proposed a financial items and non-financial items. From the perspectives of administrators and managers, the paper researches the possibility for E-Commerce Evaluation Model as a valuable criteria in measuring business model. Research design, data and methodology - The methods are taken by the classification for the type of business-to-business transactions, transactions subject, and the degree of integration and innovation capabilities. Financial and Non-financial value is used to build E-Commerce Evaluation Model. Evaluation items in Administration's perspective are composed with enhance the effectiveness of the mission, improving efficiency of the administration, and control of costs. Evaluation items in the customer's perspective were measured by customer participation and cooperation with customer Satisfaction. In the case of researching the information system's perspective, three criteria are used such as adequacy of the development process, improvement of the quality of service, and maintenance of standardized information technology. In researching for the ICT competence's perspective, evaluation items were composed of enhanced user capabilities, utilizing new technologies, and empowerment of information workers. Results - In this paper, E-Commerce Evaluation Model with financial and non-financial perspectives shows the possibility to be criteria in the case of measuring business model. Moreover, it gives the positive expectation to be successful criteria. But the research may have ambiguity in its essential concept because it cannot avoid the limitation in selecting evaluation tools from merely the model. It is impossible to exclude the possibility in omitting specific properties which may take place in actual case study. Therefore, In hereafter research, it is necessary to include actual case study research in selecting evaluation tools in order to improve the limit point. Actual measurement items which are derived from actual case study should be subdivided, and it would be more effective to complete the research. Conclusions - In rapid change in business models, there are various kinds of business models. But it is general situation that companies which adopted business models have not brought in revenue. For this reason, E-Commerce Evaluation Model is needed as an important factor for the structuring of the e-commerce success. Although it has the limitation in selecting evaluation tools from model, E-Commerce Evaluation Model proposes the implication for measuring business models as a valuable criteria.

• Journal of Nutrition and Health
• /
• v.32 no.8
• /
• pp.887-896
• /
• 1999

The purpose of this research is to assess hematological and biochemical status and the prevalence of iron deficiency of pregnant women by gestational age to provide the primary data about iron nutritional status of pregnant women. Pregnant women visiting public health centers in Ulsan participated in study and were divided into 3 trimester by last menstrual period(LMP). Hemoglobin (Hgb), hematocrit(Hct)and mean corpuscular volume(MCV) among iron status indices were not statistically different from normal distribution, however total iron binding capacity(TIBC) and serum ferritin were skewed to left and serum iron and transferrin saturation(TS) were skewed to right. Hgb was positively correlated with Hct(r=0.93, p<0.001) but TIBC was negatively correlated with all indices. Serum ferritin was also correlated with all indices, especially in 3rd trimester but not reached to 1st trimester level. Mean corpuscular hemoglobin(MCH), mean corpuscular hemoglobin concentration(MCHC), Red cell distribution width(RDW), serum iron and TS were not significantly different by trimester, however when serum serum iron was adjusted with hematocrit to correct the hemodilution, it significantly decreased in 2nd trimester. MCV increased in 2nd trimester and was maintained until late pregnancy, TIBC continued to increase throughout the trimester. The prevalence of anemic by CDC(Centers for Disease Control) Hgb criteria(Hgb <11.0g/dl in 1st and 3nd trimester, Hgb<10.5g/dl in 2nd trimester) was 2.8% in 1st trimester, 22.5% in 2nd trimester, 27.1% in 3rd trimester and was similar with prevalence by CDC Hct criteria(Hct < 33% in 1st and 3rd, Hct < 32% in 2nd). The prevalence of anemic of total subjects was 32.7% by WHO criteria(Hgb < 11.0g/dl). Although almost iron status indices increased in 3rd trimester, the prevalence of anemia by different criteria of all indices increased throughout the trimester, so iron nutritional status was considered as serious during late pregnancy. However, since factors other than iron deficiency, such as infection, infection, inflammation, other nutrient deficiency may also play a significant role, to differentiate the anemia due to mainly iron deficiency from the anemia due to other factors, serum ferritin is among the more useful indices in distinguishing the two conditions because it is depressed only in iron deficiency. Hgb<11.0g/dl and serum ferritin<12.0ug/L as the criteria of iron deficiency was suggested by CDC. 17.8% of all subjects were classified as iron deficient anemia, 14.9% as anemic from other reasons, 21.2% as iron deficiency any only 46.2% were in normal iron status.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.909-914
• /
• 2001

It is important to consider an effect of concrete member sizes when estimating the ACI rectangular stress block of a reinforced concrete flexural member. However, the experimental data and analytical analyses are still not available for a proper evaluation. For all types of loading conditions, the trend is that the size of an ACI rectangular stress block tends to change when the member sizes change. In this paper, the size variations of strength coefficients for ACI rectangular stress block and actual stress distribution have been studied. Results of a series of C-shaped specimens subjected to axial compressive load and bending moment were adopted from references 1 and 2. The analysis results show that the effect of specimen sizes on strength coefficients for ACI rectangular stress block and actual stress distribution of concrete member was apparent. Thus, the results suggest that the current strength criteria based design practice should be reviewed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.501-506
• /
• 1993

An efficient solution algorithm of the optimal load distribution problem with joint torque constraints is presented. Multiple robot system where each robot is rigidly grasping a common object is considered. The optimality criteria used is the sum of weighted norm of the joint torque vectors. The maximum and minimum bounds of each joint torque in arbitrary form are considered as constraints, and the solution that reduces the internal force to zero is obtained. The optimal load distribution problem is formulated as a quadratic optimization problem in R, where I is the number of robots. The general solution can be obtained using any efficient numerial method for quadratic programming, and for dual robot case, the optimal solution is given in a simple analytical form.