• 한국대기환경학회지
• /
• 제18권5호
• /
• pp.355-362
• /
• 2002

There has been relatively a few studies that focused on evaluation of uncertainty for standard methods by which criteria pollutants are analyzed in ambient air. Especially, uncertainty evaluation has not been made yet for sampling and analysis of airborne NO$_2$. Ambient NO$_2$ has been thought to be a major criteria pollutant worldwide because of the potential of ozone formation as well as of its own toxicity. In this study, we tried to assess uncertainties associated with the every step of sampling and of analytical procedure of Griess-Saltzman method. Quality assurance (QA) and quality control (QC) were also emphasized with the uncertainty characterization. The use of Griess-Saltzman method for ambient NO$_2$ analysis showed very uniform daily concentration distribution with the mean of 10.8 ppb and the standard deviation of 1.08ppb during the sampling period. However, seven daily samples collected at the same sampling time and place exhibited highly different concentration distribution. Therefore, we evaluated uncertainties associated with sampling and analysis through the precise application of ISO Guide. Estimates of expanded uncertainties for a total of 62 samples fell in a relatively broad range of 5.17% to 11.85%. On the other hand. the expanded uncertainties were smaller for the high concentration range of greater than 15ppb.

• 한국안전학회지
• /
• 제36권4호
• /
• pp.29-36
• /
• 2021

The allowable strength based on experiments and the design allowable strength calculated using the design criteria were compared, which suggested a ratio between the allowable strengths for the reused vertical members of the system scaffolding and system support. By investigating a total of 421 certification reports for reused vertical members, the experimental allowable strengths were collected. Using design criteria such as the road bridge design and KDS 14 30 10, the design allowable strengths were calculated for various slenderness ratios. For the system scaffolding, the average ratio between the experimental and design allowable strengths was calculated to be 0.880 by assuming a normal distribution for all specimens. However, by analyzing the strength ratio according to the slenderness ratio, the lowest average strength ratio was found to be at least 0.844. Therefore, it is reasonable to assume that the allowable strength of the reused vertical members was 80-84% of the design allowable strength. In addition, assuming the allowable strength to be 85% of the design allowable strength is a possible method for reused vertical members of system supports.

• 산경연구논집
• /
• 제11권7호
• /
• pp.19-28
• /
• 2020

Purpose: In this study, we would like to confirm that the transfer of young workers may be a means of enhancing their internal satisfaction, not to get a better job, by setting work-related characteristics that are highly relevant to job-related factors. Research design, data, and methodology: In this study, preparation for turnover was set as dependent variables to identify factors related to the turnover of young people, and the type of business, employment type, debt status, job satisfaction, job difficulty compared to education level, job difficulty, job degree, job major agreement, debt status, and other demographic social characteristics were selected as independent variables. Results: The characteristics related to personal criteria in job-seeking process were significant in the form of business, employment type, job satisfaction, work difficulty compared to the level of education, work difficulty compared to the level of technology, job major matching, and debt status. Conclusions: This study confirmed that young people's turnover may not simply be a means to get a better job, but to increase satisfaction in the internal aspects of their jobs, and that for young people, a job is an important development process that represents their identity and needs to be approached from a life-cycle perspective.

• 산경연구논집
• /
• 제14권1호
• /
• pp.21-28
• /
• 2023

Purpose: This study aims to analysis the difference by Michelin rating in customer satisfaction of restaurant listed in the Korea Michelin Guide. There are opinions that the Michelin Guide's rating system and evaluation criteria are somewhat ambiguous. Research design, data, and methodology: This study collected 145 actual online reviews published on TripAdvisor to examine how the effect of the content attributes of reviews on consumer satisfaction varies according to the Michelin grade. Based on this, two studies were conducted. Study 1 examined the effect of strong and weak positive reviews on consumer satisfaction according to the rating. Study 2 examined the effect of image information on consumer satisfaction. Results: The results revealed that the lower the Michelin rating, the more positive review had a significant effect on consumer satisfaction. The higher the rating, the more image information had an effect on consumer satisfaction. Expectations for Michelin three-star restaurants are higher than those of two-star restaurants, so customers are more likely to be used negatively when writing reviews. Conclusions: Accurate information on Michelin selection criteria should be delivered so as not to form high expectations and not to disappoint. For consumers to be satisfied with the name Michelin, the standards should be stricter.

• 설비공학논문집
• /
• 제29권6호
• /
• pp.289-296
• /
• 2017

This study aimed to analyze the deck floor heating system of an outdoor swimming pool in terms of the thermal capacity/output and the surface temperature distribution based on the outdoor temperature, to design for anti-freezing during winter. Through the transient heat transfer simulation with PHYSIBEL and theoretical equations, the surface temperature distribution of the floor heating system at two outdoor conditions in Jeju, were calculated and evaluated. The results indicate that the specific thermal output required for maintaining $4^{\circ}C$ surface temperature at the design outdoor temperature of $0.1^{\circ}C$, was about $90W/m^2$. This performance analysis can be applied for future design criteria, including optimizations of system capacity and size.

• 조명전기설비학회논문지
• /
• 제24권2호
• /
• pp.113-119
• /
• 2010

안전한 접지설계는 사고 시에 대지로 고장전류를 흘려보내는 수단과 인체가 사고기기에 접촉 시에 위험에 노출되지 않도록 하는데 있다. 변압기 중성점 접지는 1선 지락사고 시 중성점전위가 허용치 이하가 되도록 접지되어야 한다. 변압기 외함 접지는 절연사고로 외함에 전류가 흐를 때 인체 허용전압과 전류 이내로 저감시키는 목적으로 사용되고 있다. 본 논문에서는 사고 시 중성점 전위와 접촉전압을 계산하여 배전 변압기의 접지저항 영향을 심도있게 분석하였다.

• 산경연구논집
• /
• 제10권5호
• /
• pp.7-20
• /
• 2019

Purpose - This study provides appropriate procedures for EFA to help researchers conduct empirical studies by using PLS-SEM. Research design, data, and methodology - This study addresses the absolute and relative sample size criteria, sampling adequacy, factor extraction models, factor rotation methods, the criterion for the number of factors to retain, interpretation of results, and reporting information. Results - The factor analysis procedure for PLS-SEM consists of the following five stages. First, it is important to look at whether both the Bartlett test of sphericity and the KMO MSA meet the qualitative criteria. Second, PAF is a better choice of methodology. Third, an oblique technique is a suitable method for PLS-SEM. Fourth, a combined approach is strongly recommended to factor retention. PA should be used at the onset. Next, it is recommended using the K1 criterion. In addition, it is necessary to extract factors that increase the total variance explanatory power through the PVA-FS. Finally, it is appropriate to select an item with a factor loading into 0.5 or higher and a communality of 0.5. Conclusions - It is expected that the accurate factor analysis processed for PLS-SEM as previously presented will help us extract more precise factors of the structural model.

• 유통과학연구
• /
• 제14권12호
• /
• pp.5-21
• /
• 2016

Purpose - This study aims to clarify the meanings of small enterprise and modify criteria for explaining its range. Prioritizing the number of full time workers first and the sales next are proper as a new concept and range. Research design, data, and methodology - In research, 'small company' is a basic concept because the range of its standard is categorized as a 'small company' in the policy system of small & medium business. This study focuses on the solutions with ① evaluation on sales, ② standard for excluded ones ③ regulation for excluded business types in 'Act on Protection and Support for Small Enterprise'. Results - Clarifying the range of standard with maintaining the title is advisable. The scope should resist the current criteria or adopt a new standard which contains not only full time workers but also the sales. The new one may raise the policies' effectiveness because it can sort the 1% people of small enterprises. Conclusions - However, there should be a preventive system for sorting out the non-eligible ones not conformed to the CAP for small company. Therefore, it is desirable to prepare the system with 'unsuitable ones list' or regulate large income·inappropriate business types in 'Act on protection and support for small enterprise'.

• 유통과학연구
• /
• 제15권6호
• /
• pp.37-46
• /
• 2017

Purpose - The paper aims to propose an optimization model for supporting the buyer-seller negotiations. We consider the price, quality, and delivery as evaluation criteria, also recognized as objectives for negotiation. Research design, data, and methodology - The methodology used in this paper involves the input-oriented DEA with the inverse optimization. Under the existence of several potential suppliers, the price would be considered to be the decision variable to conclude the negotiation so as to meet the desired level of the quality and delivery. The data set for six suppliers with three criteria is examined by the proposed approach. Results - We present the decision aid model by displaying the price spectrum as the changes of desired output levels. It overcomes the shortcomings from previous researches mainly based on the discrete types of scenario generations. This approach shows that the obtained results help the buyer understand the trade-offs between price and performance when he/she considers the negotiation. Conclusions - The paper contributes to the numerical models for buyer-supplier negotiation in that the model for the supplier evaluation and selection is closely linked with the model for negotiation. In addition, it eliminates the unrealistic negotiation strategy, and provides the negotiation strategies that the buyer would not shift the burden on suppliers by maintaining the current efficiency.

• 유통과학연구
• /
• 제10권7호
• /
• pp.23-31
• /
• 2012

The purpose of this study is to investigate existing world economic science theories and concepts of sustainable development as well as create original system of criteria and indicators to assess potential and conditions for sustainable development from a regional perspective and based on the above justify proposals for public authorities to improve methods of economic regulation for regional development. To achieve the goal evolution process of existing theories and concepts of sustainable development and "green growth" have been studied in terms of its adaptation to the spatial development of Kazakhstan, comparative dynamics of natural resources consumption in the Asia-Pacific region and Kazakhstan were investigated as well. Methodology. World best theory and practice methods for assessment of the level of sustainable development of the country and some of its territories were also studied. We selected the best system of criteria and indicators for assessment of economic, social and environmental sustainability of regional systems. Methods offered in this article are based on traditional and new factors of economic development and conditions for operation of regional systems. Indicators are chosen with a glance to basic goals for future development of regions in Kazakhstan. It is recommended to use two levels of methodology offered by author, namely national and regional, and at the local level later (districts, municipalities, cities). The results. Method offered by the author has been tested based on materials and statistics of regions in Kazakhstan. Suitability and usability of the proposed system of criteria and indicators for measuring of economic, social and environmental sustainability of regional systems was proved. Based on this analysis it was found out that there are regions in Kazakhstan that differ from each other by most of key indicators of sustainable regional development and this tendency is increasing. Conclusions and recommendations. As a result of this analysis, the authors have substantiated a number of proposals on methods of analysis to be used, improvement of methods of regional development, implementation of institutional reforms, as well as improvement of regional statistics. This article provides recommendations that can be successfully used in the management practices by public authorities to implement a new regional strategy focused on sustainable development in future.