• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.191-200
• /
• 2003

본 연구는 말뚝 부마찰력 저감용으로 사용하는 역청재료의 유변학적 특성을 분석한 결과이다. 역청재료는 효과적으로 부마찰력을 저감시키고 경제적인 장점으로 인하여 말뚝의 부마찰력 저감 공법으로 사용하여 왔다. 본 연구에서는 세 종류의 말뚝용 역청재료를 선택하여 비교 시험을 실시하였다. 물리적 특성시험으로는 침입도 시험, 연화점 시험 및 침입도 지수를 실시하였으며 유변학적 시험으로는 동적전단 유동기를 사용하여 위상각, 복합계수, 크리프시험 및 흐름시험을 시험온도 15, 30, 45 및 6$0^{\circ}C$에서 수행하였다. 시험 결과는 역청재료의 유변학적 특성을 나타내는 위상각, G$^*$/sin $\delta$, 크리프 컴플라이언스 및 전단점도로 분석하여 상호 비교하였다. 시험 결과 온도와 위상각은 비례관계를 나타냈으며 G$^*$/sin $\delta$는 반비례 관계를 보였다. 또한, 크리프 컴플라이언스는 하중시간이 증가함에 따라 증가하여 역청재료가 시간의 변화에 따라 점성유체로 작용하는 것으로 나타났다. 크리프시험으로 인한 시간 및 온도의 변화는 크리프 컴플라이언스 값을 크게 변화 시켰으나 전단점도의 변화는 그다지 심하게 나타나지 않아서 말뚝 역청재료의 평가에는 크리프 컴플라이언스를 측정 할 수 있는 크리프시험이 적절한 것으로 평가되었다. 본 연구에서 유변학적 시험을 실시한 결과 물리적 시험으로부터 분석할 수 없는 온도와 시간의 변화에 따른 역청재료의 특성변화를 상세하게 분석할 수 있었는데 이러한 시험 결과는 말뚝용 역청재료의 선정에 큰 영향을 미칠 것으로 판단된다.

• 한국지진공학회논문집
• /
• 제17권3호
• /
• pp.117-125
• /
• 2013

Seismic isolation has been considered and utilized in various industries as a way to prevent huge damage on to structures by large earthquakes in various industries. The laminated Laminated rubber bearings is are most frequently used in seismic isolation systems. The structural Structural safety could not be assured unless the performance of the rubber bearing is not guaranteed for the life time of the structure under the consideration that the bearing is a critical structural member to sustain vertical loads in the seismically isolated structure. However, there are few studies on the deterioration problems of rubber bearings during their service life. The long term performance of the rubber bearings was not considered in past designs of seismically isolated structures. This study evaluates the long term performance and creep characteristics of laminated natural rubber bearings that are used in seismically isolated buildings. For the this study, a set of accelerated thermal aging tests and creep tests are were performed on real specimens. The experimental results show that the natural rubber bearings would have a stable change rate of change for durability under severe environmental conditions for a long time.

• 대한금속재료학회지
• /
• 제47권5호
• /
• pp.283-289
• /
• 2009

This paper dealt with a statistical analysis for evaluating the creep crack growth rate (CCGR) for Modified 9Cr-1Mo (ASTM Grade 91) steel. The CCGR data was obtained by the creep crack growth (CCG) tests conducted under various applied loads at $600^{\circ}C$. To obtain logically the B and q values used in the CCGR equation, three methods such as the least square fitting method (LSFM), the mean value method (MVM) and the probabilistic distribution method (PDM) were adopted and their CCGR lines were compared, respectively. In addition, a number of random variables were generated by using the Monte Carlo simulation (MCS), and the CCGR lines were predicted probabilistically. It was found that both the B and q coefficients followed a 2-parameter Weibull distribution well. In the case of the ranges of 10-90% for the probability variables, P(B, q), the CCGR lines were predicted. Fractographic study was conducted from the specimen after the CCG tests.

• 한국압력기기공학회 논문집
• /
• 제7권2호
• /
• pp.34-41
• /
• 2011

Wrought nickel-base superalloys are being considered as the structural materials in very-high temperature gas-cooled reactors. To understand the effects of impurities, especially oxygen, in helium coolant on the mechanical properties of Alloy 617, creep tests were performed in high temperature flowing He environments with varying $O_2$ contents at 800, 900, and $1000^{\circ}C$. Also, creep life in static He was measured to simulate the pseudo-inert environment. Creep life was the longest in static He, while the shortest in flowing helium. In static He, impurities like $O_2$ and moisture were quickly consumed by oxidation in the early stage of creep test, which prevented further oxidation during creep test. Without oxidation, microstructural change detrimental to creep such as decarburization and internal oxidation were prevented, which resulted in longer creep life. On the other hand, in flowing He environment, surface oxides were not stable enough to act as diffusion barriers for oxidation. Therefore, extensive decarburization and internal oxidation under tensile load contributed to premature failure resulting in short creep life. Limited test in flowing He+200ppm $O_2$ resulted in even shorter creep life. The oxidation samples showed extensive spallation which resulted in severe decarburization and internal oxidation in those environments. Further test and analysis are underway to clarify the relationship between oxidation and creep resistance.

• 비파괴검사학회지
• /
• 제20권1호
• /
• pp.10-17
• /
• 2000

화력발전소 보일러의 주증기관, 헤더, 스팀드럼 등과 같은 주요 고온배관설비에서 발생하는 크리프 손상을 측정하는 비파괴적 측정방법에는 레프리카, 전기저항법 및 경도법 둥이 적용되고 있으나, 이들 방법들은 측정절차 및 준비가 복잡할 뿐만 아니라 접근이 가능한 설비표면에만 적용되는 제한점을 가지고 있다. 따라서 본 논문은 이들 종래의 방법을 신뢰성 있고 정량적인 초음파 비파괴평가법으로 보완 및 적용을 위하여, 실제 고온배관의 운전조건을 모의하여 수행한 크리프 인공열화실험 및 이들 크리프손상재에 대한 초음파실험을 통한 주파수분석 연구로서, 크리프손상 상태별 초음파 신호 분류를 위해 초음파신호의 각종 주파수특성을 평가하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.225-226
• /
• 2009

Day by day, concrete buildings and structure became high-rising and magnificently vast scheduled, as contributed from the development of improved equipments that suitable to specific construction works and high qualitied Material, the durability of the concrete was highly improved. The temporary elastic reduction occur at vertical members such as walls and columns under vertical loads. Specially, inelastic reduction such as creep and shrinkage occur long termly with elastic one in case of reinforced concrete members. Generally, creep and shrinkage depend on time and this is affected by concrete strength, concrete type, member size, steel ratio, and relative humidity. And elastic reduction rely on time, too because concrete is loaded before revelation of perfect strength in terms of construction conditions. So, tests on mechanical properties of concrete certainly need in order to apply to construction by forecasting an amount of reduction caused by the complex factors. Therefore, in this study the tests on creep, shrinkage are carried out to offer basic data for predicting an amount of long-term Properties at the concrete columns of an object structure, and results of the tests are described.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3571-3580
• /
• 2023

The application of the induction bending process to pipe systems in various industrial fields is increasing. Recently, efforts have also been made to apply this bending process to nuclear power plants because it can innovatively reduce welded parts of the curved pipes, such as elbows. However, there have been no cases of the application of induction bending to the piping of nuclear power plants. In this study, the applicability of the P91 induction bending piping for the sodium-cooled fast reactor PGSFR was validated through high temperature low cycle fatigue tests and creep tests using P91 induction bending pipe specimens. The tests confirmed that the materials sufficiently satisfied the fatigue life and the creep rupture life requirements for P91 steel at 550 ℃ in the ASME B&PV Code, Sec. III, Div. 5. The results show that the effects of heating and bending by the induction bending process on the material properties were not significant and the induction bending process could be applicable to piping system of PGSFR well.

• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1420-1427
• /
• 2002

The Monkman-Grant (M-G) and its modified parameters were evaluated for type 316LN and modified 9Cr-Mo stainless steels prepared with minor element variations. Several sets of creep data for the two alloy systems were obtained by constant-load creep tests in 550～650$\^{C}$ temperature range. The M-G parameters, m, m', C, and C' were proposed and discussed for the two alloy systems. The m value of the M-C relation was 0.90 in type 316LN steel and 0.84 in modified 9Cr-Mo steel. The m' value of the modified relation was 0.94 in type 316LN steel and 0.89 in 9Cr-Mo steel. Although creep fracture modes and creep properties between type 316LN and modified 9Cr-Mo steels showed a basic difference, the M-G and its modified relations demonstrated linearity quite well. The m' of modified relation almost overlapped regardless of the creep testing conditions and chemical variations in the two alloy systems, and the parameter m' was closer to unity than that of the M-G relation.

• 한국주조공학회지
• /
• 제33권1호
• /
• pp.1-7
• /
• 2013

The effect of the Mo addition on the high temperature creep properties of the 9Cr-3W steel was also evaluated. Two experimental steels, (9Cr-3W and 9Cr-3W-0.5Mo), were prepared using a vacuum induction melting process, followed by hot rolling and heat treatment processes. Three types of precipitates, ($M_{23}C_6$, Nb-rich MX and V-rich MX) were observed in a typical tempered martensitic matrix. Significant effects of the Mo addition on the tensile properties were not observed. However, the creep properties at $650^{\circ}C$ under applied stresses of 140 and 150 MPa were considerably enhanced by the Mo addition. The microstructural observation after the creep test indicated that the addition of Mo could function to retain the recovery of the martensitic matrix, thus resulting in the enhanced creep properties of the 9Cr-3W-0.5Mo steel. Furthermore coarsening of the $M_{23}C_6$ carbides and formation of Laves phases were observed in both samples after the creep tests.

• 소성∙가공
• /
• 제17권8호
• /
• pp.558-563
• /
• 2008

The initial strain, the applied stress exponent, the activation energy, and rupture time in AZ31 magnesium alloy have been measured in order to predict the deformation mechanism and rupture life of creep over the temperature range of 423-443K. Creep tests were carried out under constant applied stress and temperature, and the lever type tester and automatic temperature controller was used for it, respectively. The experimental results showed that the applied stress exponent was about 9.74, and the activation energy for creep, 113.6KJ/mol was less than that of the self diffusion of Mg alloy including aluminum. From the results, the mechanism for creep deformation seems to be controlled by cross slip at the temperature range of 423-443K. Also the higher the applied stress and temperature, the higher the initial strain. And the rupture time for creep decreased as quadratic function with increasing the initial strain in double logarithmic axis.