• 콘크리트학회논문집
• /
• 제14권5호
• /
• pp.726-733
• /
• 2002

수축대는 큰 부재를 공사기간 중 일정기각 동안 몇 개의 부분으로 나누어 부재내의 인장 응력을 유발시키지 않으면서 상당량의 건조수축이 발생하도록 하여 건조수축으로 인한 응력을 감소시키는 역할을 하는 일시적인 조인트이다. 본 연구에서는 시공단계와 크리프에 의한 응력완화 효과를 고려한 건조수축응력해석 방법을 바탕으로 수축대의 효과를 해석할 수 있는 방법을 제안하였다. 제안된 해석방법을 10층 규모의 예제 구조물에 적용하여 얻은 결과는 다음과 같다. 수축대의 응력감소효과는 수축대가 설치된 층에만 적용되며 다른 층 슬래브에는 오히려 건조수축응력을 다소 증가시키게 된다. 수축대의 메움시기 변화에 따른 건조수축응력 감소효과는 콘크리트모델의 건조수축변형량의 시간에 따른 변화와 유사한 양상을 보이고 있으며 수축대를 메우기 전에 발생한 건조수축변형량이 많을수록 수축대의 응력감소효과가 증가한다.

• 콘크리트학회논문집
• /
• 제25권5호
• /
• pp.497-508
• /
• 2013

이 논문에서는 화재 발생에 따른 구조물의 성능 변화를 평가하기 위한 철근콘크리트 부재의 수치해석모델이 제안되었다. 화재 발생 시 유발되는 전도, 대류 및 복사열의 효과를 고려한 비정상 열전달 해석을 수행하였으며 이를 통해 단면 내 온도분포를 결정하였다. 또한, 적층섬유단면을 적용하여 온도증가로 인해 단면 내 위치에 따라 달라지는 재료의 비선형성을 고려하였다. 이 때, 온도변화에 따라 유발되는 열팽창 변형률, 비정상상태 변형률, 크리프 변형률 등의 비역학적 변형특성을 단면 내 각 섬유에 대해 고려함으로써 화재 발생 시의 극심한 온도증가를 고려한 비선형 해석을 수행하였다. 제안된 해석모델의 타당성을 입증하기 위하여 철근콘크리트부재의 표준화재실험으로부터 얻어진 실험결과와 해석결과를 비교하였으며, 특히, 화재 시간에 따른 저항능력의 변화를 살펴봄으로써, 철근콘크리트 부재의 거동특성을 평가하고 이를 설계규준에서 제시하는 단면 및 저항능력과 비교하였다.

• 열처리공학회지
• /
• 제5권1호
• /
• pp.41-49
• /
• 1992

The effects of alloying elements on the superplastic properties of Al-Li based alloys had been investigated. The intermediate thermo-mechanical treated (ITMT) Al-2.0wt%Li, Al-2.0wt%Li-1.0wt%Mg, Al-2.0wt%Li-0.12wt%Zr and Al-2.0wt%Li-1.2wt%Cu-1.0wt%Mg-0.12wt%Zr alloys were tested in tension at various temperature (400, 450, 500 and $550^{\circ}C$) and strain rate($6.7{\times}10^{-3}$, $1.0{\times}10^{-2}$, $1.6{\times}10^{-2}$ and $5.0{\times}10^{-2}/sec$). The results were as follows : The superplasticity in binary, ternary and pentanary alloys appeared at 500 to $550^{\circ}C$, and good strain rate for superplasticity. $1.6{\times}10^{-2}/sec{\sim}1.0{\times}10^{-2}/sec$ for a binary alloy and $1.0{\times}10^{-2}/sec{\sim}6.7{\times}10^{-3}/sec$ for ternary and pentanary alloys. A Zr-added ternary alloy had best value of elongation (730%) in four alloys at $550^{\circ}C$ of tension temperature and $1.0{\times}10^{-2}/sec$ of strain rate. The strain rate was greatly dependent on tension temperature and true strain rate was more than 1.0 at all test temperature and strain rate. In binary and Mg-added teranry alloys. the necks were slightly formed and their fracture surface had lips shape, but Zr-added ternary and pentanary alloy fractured along the grain boundary without necking. Their dislocations moved to grain boundary during superplasticity deformation and arranged perpendicular to grain boundary. Super plastic deformation was made by grain boundary slip of dislocation slip creep and model of core and mantle.

• Nuclear Engineering and Technology
• /
• 제20권2호
• /
• pp.88-104
• /
• 1988

이차원의 유한요소법을 이용하여 axisymmetric R-$\theta$system으로 나누어서 정상과 부하추종 운전시에 핵연료 페렛트와 피복관의 열역학적 거동을 분석하기 위해서 FURA전산코드를 개발하였다. 온도분포와 내부압력을 정확히 계산하기 위해서 페렛트와 피복관의 변형과 핵분열의 기체방출을 전체 핵연료봉 길이로 고려하였다. 열역학적 평 형방정식을 얻기 위해서 Galerkin's Technique과 가상일의 원리를 사용하였고 역학적 해석을 위해서 탄성-소성, 크리프뿐만아니라 스엘링, 재배열, 고밀화 현상등을 고려하였다. 기하학적 모델에서는 4-결점 요소라 페레트 길이의 1/2만을 택하였다. 비선형식을 안정하게 해석하기 위해서 음해법을 도입하여 뉴튼-랩손 반복법을 적용하였다 이 코드의 검증은 해석해와 실험데이타로 비교하였다. 핵연료봉의 일반적인 거동은 axisymmetry system으로 계산하였고 균열된 페레트에 접촉하는 피복관의 거동은 R-$\theta$system을 사용하였다. 부하추종에 의한 피복관의 변형시효의 민감도는 출력율, 진동수, 진폭등으로 비교하였다.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1549-1559
• /
• 2022

As an accident tolerant fuel (ATF) concept, oxide dispersion strengthened Zircaloy-4 (ODS Zry-4) cladding has been developed to enhance the mechanical properties of cladding using laser processing technology. In this study, a simulation technique was established to investigate the mechanical properties and effects of Y₂O₃ particles for the ODS Zry-4. A 3D representative volume element (RVE) model was developed considering the parameters of the size, shape, distribution and volume fraction (VF) of the Y₂O₃ particles. From the 3D RVE model, the Young's modulus, coefficient of thermal expansion (CTE) and creep strain rate of the ODS Zry-4 were effectively calculated. It was observed that the VF of Y₂O₃ particles had a significant effect on the aforementioned mechanical properties. In addition, the predicted properties of ODS Zry-4 were applied to a simulation model to investigate cladding deformation under a transient condition. The ODS Zry-4 cladding showed better performance, such as a delay in large deformation compared to Zry-4 cladding, which was also found experimentally. Accordingly, it is expected that the simulation approach developed here can be efficiently employed to predict more properties and to provide useful information with which to improve ODS Zry-4.

• 대한토목학회논문집
• /
• 제12권1호
• /
• pp.71-84
• /
• 1992

폴리머침투콘크리트는 무기계 시멘트와 유기계 폴리머를 결합시킨 신소재 콘크리트이다. 폴리머 침투콘크리트는 기존 시멘트콘크리트에 비하여 각종 역학적 특성과 내구성이 크게 개선되는 것으로 알려져 있으나, 지금까지는 국부적 강도증진과 보수재의 차원에 머무르고 있는 실정이다. 향후, 각종 고성능 프리캐스트부재의 제조에 폴리머 침투콘크리트를 보다 적극적으로 적용하기 위해서는 고분자모노머의 개발과 폴리머침투콘크리트의 재료특성에 대한 체계적인 정립이 필요하며, 본 연구에서는 이를 위하여 실험결과를 토대로 MMA계의 침투제를 개발하고 폴리머 침투콘크리트의 재료특성을 구명한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.138-143
• /
• 1998

The continuous casting process has been adopted increasingly in recent years to save both energy and labor. It has experienced a rapid development in the production of semi-finished steel products, replacing the conventional route of ingot casting plus rolling. To achieve this good merit, however, more studies about a heat transfer mechanism between roll and slab are needed. So this paper shows the results of the deformation behavior of steel cast slabs, which are about the solidification and heat transfer. This study is used to prevent internal cracks of a slab in a bending and unbending zone. The value of moving strand shell bulging between two supporting rollers under ferrostatic pressure and slab-self weight has been computed in terms of creep and elastic-plasticity. The high strand distributions in solidified shell undergoes a series of bulging are calculated with boundary condition a very closed to continuous steel cast slabs productions.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1562-1570
• /
• 2003

The prediction of the inelastic behavior of the structure is an essential part of reliability assessment procedure, because most of the failures are induced by the inelastic deformation, such as creep and plastic deformation. During decades, there has been much progress in understanding of the inelastic behavior of the materials and a lot of inelastic constitutive equations have been developed. The complexity of these constitutive equations generally requires a stable and accurate numerical method. The radial return mapping is one of the most robust integration scheme currently used. Nonlinear kinematic hardening model of Armstrong-Fredrick type has recovery term and the direction of kinematic hardening increment is not parallel to that of plastic strain increment. In this case, The conventional radial return mapping method cannot be applied directly. In this investigation, we expanded the radial return mapping method to consider the nonlinear kinematic hardening model and implemented this integration scheme into ABAQUS by means of UMAT subroutine. The solution of the non-linear system of algebraic equations arising from time discretization with the generalized midpoint rule is determined using Newton method and bisection method. Using dynamic yield condition derived from linearization of flow rule, the integration scheme for elastoplastic and viscoplastic constitutive model was unified. Several numerical examples are considered to demonstrate the efficiency and applicability of the present method.

• 한국농공학회지
• /
• 제39권3호
• /
• pp.72-82
• /
• 1997

In all inelastic deformations time rate effects are always present to some degree. Whether or not their exclusion has a significant influence on the prediction of the material behaviour depends upon several factors. In the study of structural components under static loading conditions at normal temperature it is accepted that time rate effects are generally not important. However metals, especially under high temperatures, exhibit simultaneously the phenomena of creep and viscoplasticity. In this study, elastoplastic and elasto-viscoplastic models include nonlinear geometrical effects were developed and several numerical examples are also included to verify the computer programming work developed here in this work. Comparisons of the calculated results, for the elasto-viscoplastic analysis of an internally pressurised thick cylinder under plane strain condition, have shown that the model yields excellent results. The results obtained from the numerical examples for an elasto-viscoplastic analysis of the Nuclear Reinforced Concrete Containment Structure(NRCCS) subjected to an incrementally applied internal pressure were summarized as follows : 1. The steady state hoop stress distribution along the shell layer of dome and dome wall junction part of NRCCS were linearly behave and the stress in interior surfaces was larger than that in exterior. 2.However in the upper part of the wall of NRCCS the steady state hoop stress in creased linearly from its inner to outer surfaces, being the exact reverse to the previous case of dome/dome-wall junction part. 3.At the lower part of wall of NRCCS, the linear change of steady state hoop stress along its wall layer began to disturb above a certain level of load increase.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1115-1123
• /
• 2008

When constructing projects such as road embankments, bridge approaches, dikes or buildings on soft, compressible soils, significant settlements may occur due to the consolidation of these soils under the superimposed loads. The compressibility of the soil skeleton of a soft clay is influenced by such factors as structure and fabric, stress path, temperature and loading rate. Although it is possible to determine appropriate relations and the corresponding material parameters in the laboratory, it is well known that sample disturbance due to stress release, temperature change and moisture content change can have a profound effect on the compressibility of a clay. The early research of Tezaghi and Casagrande has had a lasting influence on our interpretation of consolidation data. The 24 hour, incremental load, oedometer test has become, more or less, the standard procedure for determining the one-dimensional, stress-strain behavior of clays. An important notion relates to the interpretation of the data is the ore-consolidation pressure ${\sigma}_p$, which is located approximately at the break in the slope on the curve. From a practical point of view, this pressure is usually viewed as corresponding to the maximum past effective stress supported by the soil. Researchers have shown, however, that the value of ${\sigma}_p$ depends on the test procedure. furthermore, owing to sampling disturbance, the results of the laboratory consolidation test must be corrected to better capture the in-situ compressibility characteristics. The corrections apply, strictly speaking, to soils where the relation between strain and effective stress is time independent. An important assumption in Terzaghi's one-dimensional theory of consolidation is that the soil skeleton behaves elastically. On the other hand, Buisman recognized that creep deformations in settlement analysis can be important. this has led to extensions to Terzaghi's theory by various investigators, including the applicant and coworkers. The main object of this study is to suggestion the modified compression index value to predict settlements by back calculating the $C_c$ from different numerical models, which are giving best prediction settlements for multi layers including very thick soft clay.