• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.417-420
• /
• 2004

The Prestressed concrete girder bridges(PSC girder bridges), consisting of prestressed concrete girders and cast-in-place deck slabs, are sensitive to creep and shrinkage of concrete. Shrinkage and creep produce additional internal forces md deformations in PSC girder bridges. The long-term behavior of the PSC girder bridges depends on time-dependent properties of materials, amount of prestressing, methods and sequences of construction and age at loading. The purpose of this study is to predict the long-term behavior of PSC girder bridge. For this purpose, Computer program for Time-dependent analysis of PSC girder bridge has been developed. thereafter, Time-dependent analysis using developed computer program was carried out about 3-span continuous PSC girder bridges. Various construction timing sequences were used for parametric study.

• 콘크리트학회논문집
• /
• 제17권4호
• /
• pp.631-635
• /
• 2005

Aggregate gradation effects on cracking-related displacements of concrete are investigated in the laboratory using the German cracking frame. Concrete workability was assessed by use of the slump and drop tests for two different concrete mixtures consisting of gap-graded and dense-graded aggregates. Shrinkage strain, cracking frame strain, and concrete strain were measured and used to compare to strength gain and creep development. The measured and calculated strains of the different aggregate gradations were compared each other. Gradation effects on strength and stress development relative to tensile cracking at saw-cut tip were also investigated. Test results revealed that the gap-graded concrete has indicated larger shrinkage and creep strains than dense-grade concrete perhaps because of its higher volume concrete of cement mortars in the mixture.

• Structural Engineering and Mechanics
• /
• 제20권1호
• /
• pp.69-83
• /
• 2005

In many cases, underground structures are built using conventional above-grade structural systems to carry gravity load. This paper proposes the use of underground arches, termed "buried arches", to support gravity loads, wherein the horizontal thrust of the arch is equilibrated by soil pressure. Because the horizontal soil pressure increases with depth, the depth of the arch may be reduced as the depth below grade increases. Critical to the success of such an approach is a proper accounting of creep and shrinkage for arches made of reinforced concrete. This paper addresses the influence of equilibrium, creep, and shrinkage as they affect the design of the arch from a theoretical perspective. Several examples illustrate the use of buried arches for the design of underground parking structures.

• 한국건축시공학회지
• /
• 제16권4호
• /
• pp.305-311
• /
• 2016

개발된 저열 시멘트 콘크리트의 장기거동 특성인 비구속 건조수축과 크리프가 양생온도를 주요 변수로 측정하였다. 저열 콘크리트의 목표 압축강도인 42MPa를 고려하여 양생온도 5, 20, $40^{\circ}C$에서 물-결합재비는 각각 27.5, 30, 32.5%를 선택하였다. 콘크리트의 건조수축 변형률은 양생온도가 낮을수록 모세관 수 및 겔 공극수의 증발지연으로 인해 감소하는 경향을 보였다. 반면 크리프 변형률은 전이 온도 크리프의 발생으로 인하여 초기 양생온도가 낮은 실험체에서 높았다. 콘크리트 구조설계기준(KCI) 예측모델은 ACI 209 예측모델에 비해 실험결과와 잘 일치하였지만 개발된 저열 시멘트에 대한 보정계수의 제안이 필요하였다.

• 콘크리트학회지
• /
• 제9권2호
• /
• pp.153-161
• /
• 1997

콘크리트가 외기에 노출되면 수분확산 현상으로 수분의 이동이 일어나고, 콘크리트 내부는 부등수분분포상태가 된다. 이러한 부등수분분포에 의하여 콘크리트 구조물에는 부등건조수축이 발생하며, 부등건조수축은 콘크리트 표면에 인장응력을 발생시키고, 표면균열의 원인이 되기도 한다. 또한 부등건조수축으로 인한 잔류응력은 현저한 크리이프의 영향을 받고, 이 때 각 위치에서 수분의 차이로 인하여 부등크리이프가 발생한다. 따라서 이 연구에서는 수분확산이론을 근거로 하여 콘크리트 내부의 수분분포를 합리적으로 예측할 수 있는 해석프로그램을 개발하였다. 그리고 콘크리트 내부의 각 위치에서 부등크리이프의 영향을 고려한 부등건조수축 해석방법을 제시하였다. 또한 콘크리트 내부의 각 위치에서의 부등건조수축 측정실험을 실시하여, 부등건조수축 해석방법의 타당성을 검증하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.433-436
• /
• 2003

This paper proposes rheological creep and shrinkage model of FCM bridges made for HPC about 40Mpa. The proposed model separates time dependent part with characteristic material part and regards main variable as elastic modulus, which represents material characteristic and history. To find parameters of the model, we had creep, shrinkage and basic material tests about four FCM bridges. All specimens were tested with same condition, after 3days, 28days and 90days of curing. Also, exposed condition and closed condition were separately given to compare the data of each bridge. Finally, all creep data of four FCM bridges were compared to proposed rheological model and other proposed world code models, AASHTO, ACI, CEB-FIP, JSCE and etc.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.95-100
• /
• 1996

Creep, drying shrinkage, modulus of elasiticity and Poisson's ratio of concrete are influenced by a number of factors such as mix type, member thickness, curing condition and loading cases. Particularly, creep and shrinkage in concrete have yet to be studied due to its complicated time-dependent properties. In this study, the concrete creep tests were carried out at varous ages of loading-7, 28, 90, 180 and 365 days in order to investigate and quantify its long-term properties. The test procedures and analysis of the test results were also described herein. The results of this study will enable A/E to calculate effective prestressing forces considering time-dependent prestressing loss and evaluate the structural integrity of the prestressing system using the representative values derived from this property test.

• Computers and Concrete
• /
• 제6권2호
• /
• pp.167-185
• /
• 2009

Reinforced concrete floors constructed between movement restraints often crack seriously due to shrinkage after completion. One common mitigation measure is to construct the concrete floors in stages to allow part of the shrinkage movement to take place before completion. However, shrinkage movement analysis of concrete floors constructed in stages is quite cumbersome, as the structural configuration changes during construction, thus necessitating reanalysis of the partially completed structure at each stage. Herein, a finite element method for shrinkage movement analysis of concrete floors constructed in stages is developed. It analyses the whole structure, including the completed and uncompleted portions, at all stages. The same mesh is used all the time and therefore re-meshing and location matching are no longer necessary. This is achieved by giving negligibly small stiffness to the uncompleted portions, which in reality do not exist yet. In the analysis, the locked-in strains due to increase in elastic modulus as the concrete hardens and the creep of the hardened concrete are taken into account. Most important of all, this method would enable fully automatic shrinkage movement analysis for the purpose of construction control.

• 대한토목학회논문집
• /
• 제34권3호
• /
• pp.755-761
• /
• 2014

콘크리트의 크리프와 건조수축 변형에 대한 내적 혹은 외적 구속은 크리프 발생 응력조건을 변화시키며 이에 따라 크리프 변형의 발생은 응력변화에 종속적으로 변화한다. 시간이력 하중을 받는 크리프 거동문제로서 이해되는 이러한 크리프 거동현상의 수학적 모델링은 일반적으로 재하시의 콘크리트 재령과 물성값 및 하중이력을 기본 구성인자로 고려하여 시간적분 혹은 점증적 형태로 유도되었다. 본 논문에서는 시간이력하중을 받는 크리프 모델 가운데 단일 크리프 곡선을 사용하는 초기 크리프 모델인 평행 크리프 법의 단순성을 고려하여 이 방법이 갖는 단점과 한계성을 극복하고 성능을 개선한 평행 크리프 법을 유도하였다. 유도된 크리프 모델의 성질을 분석하고 예측 성능을 검증하기 위한 목적으로 원통형 콘크리트 공시체를 제작하고 시간이력 하중 하의 크리프 실험을 수행하였다. 끝으로, 콘크리트 공시체의 크리프 변형으로 인한 초기하중의 변화가 공시체의 재령에 따른 거동에 미치는 영향정도를 실험을 통해 분석하였으며, 크리프 시험기의 스프링계수를 측정하여 이로 인한 실험오차를 보정하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권1호
• /
• pp.237-246
• /
• 2001

This study is to measure the creep coefficient by 3 days, 7 days and 28 days in the age when loading for the quality assessment of $350kgf/cm^2$ in the high-strength concrete. And it is to analyze the behavior of creep coefficient by applying the experimental data though the compressive strength test, the elastic modulus test and the dry shrinkage test to the ACI-209, AASHTO-94 and CEB/FIP-90, the prediction mode, and the basis of concrete structural design. Also it is to analyze the behavior of short-term creep coefficient during 91 days in the age when loading through the experiment by using the regression analysis, the statistical theory. As applying it to the long-term behavior during 365 days and comparing with the creep prediction mode and examining it, the result from the analysis of the quality of the concrete is as follows. As the result of comparison and analysis about the ACI-209, AASHTO-94 and CEB/FIP-90, the prediction mode, and the basis of concrete structural design, the normal Portland cement class 1 shows the approximate value with the prediction of GEE/PIP-90 and the basis of concrete structural design, but in case of the prediction of ACI-209 and AASHTO-94, there would be worry of underestimation in the application.