• KIEAE Journal
• /
• v.12 no.4
• /
• pp.89-95
• /
• 2012

At present, many countries are trying to reduce green gas emissions to mitigate the effects of these gases on climate change. Year after year, there have been efforts to cut energy use for heating and cooling. Heating and cooling systems, common in all forms of housing, are increasing due to the constant supply of new housing resulting from improvements in economic growth and the quality of life. Thus, studies related to the design of cooling and heating systems to improve energy efficiency are expanding. Among the new designs, radiant floor cooling and heating systems which use capillary tubes are becoming viable means of reducing energy use. Radiant floor cooling and heating systems which use capillary tubes are creative and sustainable systems in which cool and hot water is circulated into capillary tube which has small diameter. In this study, the cooling and heating performance of this type of capillary tube system is investigated in an experimental study and a simulation using TRNSYS. The results of the experimental study show that under a peak load, a capillary tube radiant floor cooling system using geothermal energy can achieve desired indoor temperature without an additional heat source. The set room air temperature is maintained while the floor surface temperature, PMV and PPD remain within the comfort range. Also, this system is more economic than a packaged air conditioner system due to its higher COP. The results of the simulation show that the capillary tube radiant floor heating system maintains set temperature more stable than a PB pipe radiant floor heating system due to its lower supply temperature of hot water. In terms of energy consumption, the capillary tube radiant floor heating system is more efficient than the PB pipe radiant floor heating system.

• Journal of Information Technology Services
• /
• v.15 no.3
• /
• pp.15-31
• /
• 2016

Sales Force Automation (SFA) is a strategic information system and one of the components of operational CRM system. SFA supports salespeople's activities such as selection of potential customers, creative value proposition, after-sales services, etc. SFA is increasingly used in many companies because it has the advantages to raise the salespeople's productivity by developing forecasting ability, value proposition ability, after sales service ability etc. Many researches have shown that implementation of SFA leads to the increase of salepeople performance, organizational performance, and quality of customer relationship. However, Some prior studies have discussed on the SFA implementation failure and pointed out that one of important causes of this failure is salespeople's resistance to SFA. Although many researches explain SFA acceptance phenomenon using Technology Acceptance Model (TAM) and Theory of Planned Behavior (TPB), these researches didn't deeply investigate the salespeople's resistance to SFA. Therefore, this study focuses on the factors influencing salespeople's resistance to SFA and the relationships among these factors. This study identified three factors (salespeople's perceived loss of power, perceived loss of autonomy, and perceived time and effort waste) influencing salespeople's resistance to SFA. The hypotheses testing results showed that salespeople's perceived loss of power and perceived time and effort waste significantly increased salespeople's resistance to SFA. And salespeople's perceived loss of power plays a mediating role between perceived loss of autonomy/perceived time and effort waste and salespeople's resistance to SFA. At the end of the paper, theoretical and managerial implications of this study and the limitations and future research directions are discussed.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.5
• /
• pp.320-332
• /
• 2007

Recently, new interests on digital contents and UCC(User Created Content)s are growing fast through the development of internet. However, there have been many side-effects on those interests. The representative problems are perversing illegal copies and the distributions for personal valuable digital contents to unauthorized anonymous users. These decrease creation of good digital contents by interfering with the growth of information technology industry and the content provider#s creative will. To resolve these problems, in the paper, we propose a novel auction system for multimedia contents and bidding processes. The system applies the concept of used goods onto digital contents. Especially, the auction system is based on mobile environment. Finally, the performance evaluation shows that those main auction process algorithms indicate the time complexity of logarithm scale for insertions and searches. Therefore, the performance of the system is not significantly influenced by the amount of contents even though the volume of contents in the system is increasing.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.111-118
• /
• 2012

Capstone design is silk engineering in the field of education, the program requires contractors, not the industrial ability to adapt with the creative overall design training programmes in design education in terms of the applicability of that remains to be seen. In this study, the University of art and industrial design major, konkuk University School of design of the Capstone design 2011 and take advantage of the performance, and the curriculum is mainly applied for the technology. Design and development should be followed for experimental studies and a wealth of knowledge for the creation of advanced technology and professional support for institutions and industries to improve practical skills and lessons based on the Convention. This course through the patent, utility model, design, intellectual property, such as money to improve the practical skills of students to gauge the capacity of enterprises through the design, companies will come up with a gauge, and enhancing the competitiveness of SMEs in the community support instrument.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.2
• /
• pp.169-177
• /
• 2015

Because technology of the sintering process is highly advanced, the gerotor used in the internal gear pumps of vehicles has advantages for manufacturing complex profiles and obtaining durability and minimization. However, it has been necessary to continuously improve the flow rate and noise of internal gear pumps for better fuel efficiency. The existing rotor was designed using a translation algorithm. This caused a discontinuity of the rotor profile, which had adverse effects on the performance. In this study, to improve the discontinuity of the profile, a new design program using a rotation and translation algorithm was developed, and two types of combined multiple profiles (three-ellipses and ellipse 1-involute-ellipse 2) were generated. Then, the performances (flow, flow rate, specific sliding, and pressure angle) of these profiles were calculated. On the basis of the calculation results for the performances, optimal designs of the two types were carried out and verified by comparing their performances with those of the existing rotor profiles.

• Journal of the Korean Society of Costume
• /
• v.62 no.4
• /
• pp.1-14
• /
• 2012

Ever since the year 2000, Korea's musical markets has invited famous overseas license performances and have therefore cooperated with staffs working overseas in regards to stage costumes. This study aims to suggest the methodology of the stage costume making process according to the present advanced production system of Korea's musical market. The researcher participated in the stage costume making work of 'Chicago' as a costume supervisor. It took place at the Opera House of Seongnam Art Center from January 10, 2010 to February 28, 2010. Furthermore, there was significance in reinforcing academic values and implementing practical making process of stage-costumes based on the actual field work. The method of this research was carried out through a theoretical research and a case study that focused on empirical research. As for the research scope, it was limited to the actual stage-costumes that the researcher fully engaged with as a costume supervisor of the musical 'Chicago.' The results of this study were as follows. The stage costume making process of the musical 'Chicago' was categorized according to the classification of production system in the performance. For pre-production, it was divided according to the information of the actor and the analysis of the bible. Rehearsal period was divided according to the product clothes and fitting. Production week & preview were divided according to the changeover of clothes and the arrangement of dressers. The Run was divided according to the inspection of the situation concerning clothes in general during the performance. Post-Production Period was divided according to the collection of clothes and the implemented database. This study eventually suggested appropriate stage-costume making processes for the costumes making environment according to the expansion of overseas license musical market. However, it has a limitation of the research scope to the musical 'Chicago.' The creative performances of the domestic version are planned in diverse forms and come to abroad animate by the Korean Wave. Therefore, the field of stage-costume is necessary for the establishment of practical schemes of the system and copyright in accordance with the environment.

• Proceedings of the Korean Society for the Gifted Conference
• /
• 2003.05a
• /
• pp.137-138
• /
• 2003

Understanding how and why people differ is a fundamental, if distant, goal of research efforts to bridge psychological and biological levels of analysis. General fluid intelligence (gF) is a major dimension of individual differences and refers to reasoning and novel problemsolving ability. A conceptual integration of evidence from cognitive (behavioral) and anatomical studies suggeststhat gF should covary with both task performance and neural activity in specific brain systems when specific cognitive demands are present, with the neural activity mediating the relation between gF and performance. Direct investigation of this possibility will be a critical step toward a mechanistic model of human intelligence. In turn, a mechanistic model might suggest ways to enhance gF through targeted behavioral or neurobiological intervent ions, We formed two different groups as subjects based on their scholarly attainments. Each group consists of 20 volunteers(aged 16-17 years, right-handed males) from the National Gifted School and a local high school respectively. To test whether individual differences in general intelligence are mediated at a neural level, we first assessed intellectual characteristics in 40 subjects using standard intelligence tests (Raven's Advanced Progressive Matrices, Wechsler Adult Intelligence Scale, Torrance Tests of Creative Thinking) administered outside of the MR scanner. We then used functional magnetic resonance imaging (fMRl) to measure task-related brain activity as participants performed three different kinds of computerized reasoning tasks that were intended to activate the relevant neural systems. To examine the difference of neural activity according to discrepancy in general intelligence, we compared the brain activity of both extreme groups (each, n=10) of the participants based on the standard intelligence test scores. In contrast to the common expectation, there was no significant difference of brain region involved in high-g tasks between both groups. Random effect analysis exhibited that lateral prefrontal, anterior cingulate and parietal cortex are associated with gF. Despite very different task contents in the three high-g-low-g contrasts, recruitment of multiple regions is markedly similar in each case, However, on the task with high 9F correlations, the Prodigy group, (intelligence rank: >99%) showed higher task-related neural activity in several brain regions. These results suggest that the relationship between gF and brain activity should be stronger under high-g conditions than low-g conditions.

• Journal of The Korean Association For Science Education
• /
• v.31 no.6
• /
• pp.986-997
• /
• 2011

In this study, we developed analogical experimental activities to foster scientific creativity in inquiry learning and applied them to 7th grade science-gifted students. The influences of inquiry learning-based analogical experiments were investigated with respect to the experimental design processes. We classified the patterns of experimental design processes by creative thinking processes and analyzed performance levels by the elements of experimental design processes. The students' experimental design processes were categorized into three kinds of patterns such as reinitiated motion, backward-divergent motion and stationary motion. Those belonging to the reinitiated motion performed precise experimental design from new perspectives by identifying the mapping in depth and considering the elements of experimental design processes. In the case of the backward-divergent motion, they shifted their positions to new directions, but the concreteness of experimental design was insufficient due to the lack of mapping or considering the elements. In the type of stationary motion, maintaining their previous positions, they showed less performance of experimental design without considering the elements sufficiently. Educational implication of these findings are discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2911-2918
• /
• 2014

Nowadays, most Internet servers run on virtual a network which connects each virtual machine, to process large amounts of data on single physical computer. The virtual machines for their own purposes are interconnected to other virtual server systems with various types of operating systems. Each virtual server may share one physical computer resources and operates at a service seamlessly to each other. Sometimes even the virtual machines are implemented using a method that lease the physical IT resources without purchasing physical server. Therefore, a virtual switch is needed to improve the performance when a large number of virtual machines operate on physical server. In this study, the implementation and investigation was performed for the virtual switches, OpenvSwitch and DPDKvSwitch, in order to provide the necessary high-performance cloud services to creative business.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.66-71
• /
• 2016

For the manual transmission gearbox used in the automotive industry, gear meshing transmission error is the main source of noise known as gear whine, and radiated gear whine noise plays an important role in the whole gearbox. Therefore, in order to keep competitive in the automotive market, the NVH performance of transmission gearboxes is increasingly important for automotive manufacturers when a new product is developed. In this paper, in order to achieve an optimized tooth contact pattern, gear tooth modification is applied to make up for the deformation of the teeth owing to load. A five-speed MT gearbox is firstly modeled in RomaxDesign software and the prediction of transmission error under the loaded torques is studied and compared. From the simulation, the transmission error and maximum contact stress are also simulated and compared after tooth modification of the loaded torques. Finally, the simulation results are used to optimize the whole gearbox design and the final gearbox prototype is testified to obtain NVH performance in a semi-anechoic room.