• Elastomers and Composites
• /
• 제39권2호
• /
• pp.142-152
• /
• 2004

서로 다른 두 종류의 폴리스타일렌(PS)을 injection 기계를 이용하여 인장 시편을 만들고, 온도와 인장 속도에 따른 crazing 거동 특성을 연구하기 위하여 다양한 시험을 하였다. 기계적물성은 craze 형성뿐만 아니라 다양한 시험 변수에 의해 영향을 받으며, brittle-ductile transition 이하의 온도에서의 인장 응력 및 최대 신율은 분자량, 인장 속도의 증가 및 온도의 감소에 따라 증가하며 craze의 수와 평균 길이 또한 증가한다. Crazing 응력도 동일한 형태로 증가함을 보여준다. 그러나, 이러한 특성은 인장 강도에 미치는 영향과 비교했을 때 보다 의존도는 상대적으로 낮다. Craze 형성과 성장에 필요한 시간으로 설명할 수 있는 crazing 응력과 인장 응력간의 차이는 분자량, 인장 속도에 따라 비례적으로 그리고, 온도가 감소함에 따라 증가함을 보여 준다. Crazing 은 ${\beta}$-relaxation 온도 근처에서 활성화된다. 이 온도에서는 crazing 응력이 급격하게 감소함을 나타낸다. 인장 평가시 craze 밀도가 적용된 응력에 따라 기하 급수적으로 증가되는데, 개시 단계에서는 craze는 서서히 형성되며, 일단 일정한 수만큼의 craze가 형성이 되면 craze 밀도가 급속도로 증가했다.

• Elastomers and Composites
• /
• 제39권4호
• /
• pp.324-329
• /
• 2004

인계난연제가 함유된 Polycarbonate (PC)/Acrylonitrile-Butadiene-Styrene (ABS) 블렌드에서 사출온도가 상승될 경우 모폴로지 변화와 크레이즈 (Craze) 발생 정도 및 기계적 강도와의 상관관계에 대하여 연구하였다. 사출온도가 상승될 경우 분산상의 합체현상(Coalescence)이 나타났으며 파괴시편에서 크레이즈가 많이 발생하였음을 관찰하였다. 또한 급격한 충격강도의 저하가 발생하였다. 소량의 상용화제를 첨가한 경우 합체현상이 억제됨을 관찰하였으며 크레이즈도 많이 줄여 들었음을 관찰하였다.

• 한국재료학회지
• /
• 제30권3호
• /
• pp.105-110
• /
• 2020

Cu/PET composite films are widely used in a variety of wearable electronics. Lifetime of the electronics is determined by adhesion between the Cu film and the PET substrate. The formation of an anisotropic nanostructure on the PET surface by surface modification can enhance Cu/PET interfacial adhesion. The shape and size of the anisotropic nanostructures of the PET surface can be controlled by varying the surface modification conditions. In this work, the effect of Cu/PET interface nanostructures on the failure mechanism of a Cu/PET flexible composite film is studied. From observation of the morphologies of the anisotropic nanostructures on plasma-treated PET surfaces, and cross-sections and surfaces of the fractured specimens, the Cu/PET interface area and nanostructure width are analyzed and the failure mechanism of the Cu/PET film is investigated. It is found that the failure mechanism of the Cu/PET flexible composite film depends on the shape and size of the plasmatreated PET surface nanostructures. Cu/PET interface nanostructures with maximal peel strength exhibit multiple craze-crack propagation behavior, while smaller or larger interface nanostructures exhibit single-path craze-crack propagation behavior.

• 한국정밀공학회지
• /
• 제3권1호
• /
• pp.40-49
• /
• 1986

Crack, craze and void are common defects which may be found in the bulk of polymeric materials such as either themoplastics or thermosets. The healing phenomena, autohesion, of these defects are known to be a intrinsic material property of various polymeric materials. However, only a few experimental and theoretical investigations on crack, void and craze healing phenomena for various polymeric materials have been reported up to date [1, 2, 3]. This may be partly due to the complications of healing processes and lacking of appropriate theoretical developments. Recently, some investigators have been urged to study the healing phenomena of various polymenic materials since the significance of the use of polymer based alloys or composites has been raised in terms of specific strength and energy saving. In the earlier published reports [1, 2, 3, 4], the crack and void healing velocity, healing toughness and some other healing mechanical and physical properties were measured experimentally and compared with predicted values by utilizing a simple model such as the reptation model under some resonable assumptions. It seems, however, that the general acceptance of the proposed modeling analyses is yet open question. The crack healing processes seem to be complicate and highly dependent on the state of virgin material in terms of mechanical and physical properties. Furthermore, it is also strongly dependent on the histories of crack, craze and void development including fracture suface morphology, the shape of void and the degree of disentanglement of fibril in the craze. The rate of crack healing may be a function of environmental factors such as healing temperature, time and pressure which gives different contact configurations between two separated surfaces. It seems to be reasonable to assume that the crack healing processes may be divided in several distinguished steps like stress relaxation with molecular chain arrangement, surface contact (wetting), inter- diffusion process and com;oete healing (to obtain the original strength). In this context, it is likely that we no longer have to accept the limitation of cumulative damage theories and fatigue life if it is probable to remove the defects such as crack, craze and void and to restore the original strength of polymers or polymer based compowites by suitable choice of healing histories and methods. In this paper, we wish to present a very simple and intuitive theoretical model for the prediction of healed fracture toughness of cracked or defective polymeric components. The central idea of this investigation, thus, may be the modeling of behavior of chain molecules under healing conditions including the effects of chain scission on the healing processes. The validity of this proposed model will be studied by making comparisons between theoretically predicted values and experimentally determined results in near future and will be reported elsewhere.

• Restorative Dentistry and Endodontics
• /
• 제11권1호
• /
• pp.33-41
• /
• 1985

The purpose of this study was to determine the extent of tooth structure crazing when pinhole were drilled in dentin at various distances from the dentionenamel junction, and when pins were inserted by hand wrench and Auto-klutch handpiece. Sixty freshly extracted teeth were embedded in blocks of cold-curing acrylic resin to a level 1mm apical to the cementoenamel junction, the crown of the teeth were removed to a level 1.5mm coronal to the cementoenamel junction. After being sectioned, the cut surface of the teeth were smoothed, and they were divided into 4 groups. Group I : 4 pinholes were drilled with self-threading Minim spiral drill and pins were inserted with hand wrench in fifteen teeth. Group II : 4 pinholes were drilled with self-threading Minim spiral drill and pins were inserted with Auto-klutch handpiece in fifteen teeth. Group III : 4 pinholes were drilled with self-threading Regular spiral drill and pins were inserted with hand wrench in fifteen teeth. Group IV : 4 pinholes were drilled with self-threading Regular spiral drill and pins were inserted with Auto-klutch handpiece in fifteen teeth. The cut surface were then examined microscopically for the presence or absence of craze line. The results were as follows: 1. The self-threading Minim pin groups (Group I & II) produced less craze lines than did the self-threading Regular pin groups (Group III & IV). 2. In the self-threading Minim pin groups, there was more craze lines with hand wrench (Group I) than with Auto-klutch handpiece (Group 11). 3. In the self-threading Regular pin groups, there was more craze lines with hand wrench (Group III) than with Auto-klutch handpiece (Group IV). 4. Placement of the pinhole at 0.0mm from the dentionenamel junction produced more craze lines than placed at 0.5mm, 1.0mm (p<0.05), however there was no statistically significant between the 0.5mm and 1.0mm distance.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권3호
• /
• pp.52-57
• /
• 2023

In the restaurant industry, along with the fourth industry, there is a food technology craze due to IT development. In addition, many prospective restaurant founders are increasing due to restaurant start-ups with relatively low entry barriers. And ChatGPT is causing a craze for chatbots. Therefore, the purpose of this paper is to analyze factors for restaurant start-ups with big data and implement a system to make it easier for prospective restaurant start-ups to recommend restaurant start-ups that suit them and further increase the success rate for restaurant start-ups. Therefore, this paper is meaningful in analyzing the start-up factors desired by prospective restaurant founders with big data, turning them into text, and furthermore, designing and studying the start-up factors shown as big data into a restaurant start-up chatbot system.

• 디자인학연구
• /
• 제21권
• /
• pp.109-121
• /
• 1997

The poster in America was considered merely a means of advertising until the late 1880s, and was not thought to have any intrinsic value. During the 1890s, the poster in America came into its own as a medium of artistic expression, and it was recognized anew as an medium of advertising. The production and circulation of posters became active, and it won the popularity of poster collectors. But the American poster renaissance flourished for a few brief years in the 1890s. In this thesis, I paid attention that the art poster in America was mainly a product of the publishing trade, and that it's rise and fall was connected with the circumstances of the publishing business. In chapterII, I discussed the growth of publishing business and the phenomenon of poster craze, and tried to figure out the characteristic of American poster design in 1890s. The American poster boom was formally initiated in Spring 1893, when Edward Penfield published the first of his monthly designs advertising Harper's Magazine. Penfield created a native American tradition of realism in the series of Harper's posters, his figures are realistic though anonymous, and are drawn without distortion or grotesquery, and details are reduced to essentials but not eliminated. In chapterIII, I discussed the change in book cover design in the 1890s. The rapid evolution of book and magazine covers was largely a reaction to the poster craze. Most magazines were issued with the same standard covers month after month at that time. In 1894, when William Bradley was asked to design a standard cover for the Inland Printer, he convinced the publishers to change the cover with every issue instead of designing one permanent cover. With the poster craze at its height, posters became big business, but still they were not very successful as advertisements. Because collectors of the 1890s were more interested in acquiring posters than in buying books. Significantly, this was also the moment when poster like designs began to appear on the covers of books and mass magazines. Publishers took notice of an idea. If the eye-catching design was on the cover itself rather than on a separate poster, the customer who wished to acquire the design would be obliged to buy the magazine. So there was no distinction stylistically between the posters of the 1890s and the magazine covers of the early 1900s. At the same time, the artistic poster was beginning to decline. While the most typical advertisements of the 1890s were the book and magazine posters of Bradley and Penfield, after 1900 advertisements for manufacturers' products played an increasingly prominent role. They would never again assume the leading role that they had played in the 1890s.

• E2M - 전기 전자와 첨단 소재
• /
• 제1권2호
• /
• pp.136-148
• /
• 1988

본 논문은 Epoxy수지에 무기물을 첨가하여 tracking 특성에 미치는 자외선 조사의 영향을 연구하였다. 시료는 Bisphenol A형 Epoxy수지에 충진제 MgO와 Al(OH)$_{3}$를 각각 첨가한 시료와 무기물을 첨가하지 않은 무층진 시료에 대하여 자외선을 조사하여 산화 및 열화현상과 tracking현상을 비교 연구 검토하였다. 그 결과 자외선조사로 인하여 carbonyl기의 생성과 craze의 발생이 있었고 이는 tracking 파괴와 침식을 용이하게 한다. 그리고 Epoxy수지에 충진제를 첨가하므로서 자외선에 의한 열화를 감소시키고 내 tracking성을 향상시킨다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 추계학술발표대회
• /
• pp.730-732
• /
• 2011

최근 전 세계적으로 스마트폰의 열풍이 거세게 불고 있다. 본격적으로 출시된 지 얼마 되지 않은 스마트폰이 이렇게 인기를 끌게 된 원인을 분석하고, 스마트폰의 가장 큰 문제점인 보안 사고의 심각성과 원인, 해결 방안에 대해 연구한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.403-404
• /
• 2023

In an era where everything is digitalized using AI(Artificial Intelligence), such as the ChatGPT craze, the evacuation guidance system still uses an analog and fixed method, so there is a limit to quick response in case of fire. In order to overcome this, we introduce a digitally transformed evacuation guidance system using AI and discuss its effectiveness.