• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.27-40
• /
• 1997

This study investigated the effects of laser irradiation on the exposed pulp and the possibility of direct pulp capping with the $CO_2$ laser. Results were obtained from the observation of the residual pulpal healing process. Class V cavities on 48 anterior teeth from 8 adult dogs were prepared and pulp chambers were intentionally opened with dental explorer. The control group consisted of 16 teeth. $Dycal^{(R)}$(Caulk Co., U.S.A.) was applied to exposed site once bleeding was stopped. Cavities were sealed with $I.R.M^{(R)}$. In the experimental group 1 (16 teeth), laser(LASERSAT $CO_2^{(R)}$, Satelec Co.) was irradiated on the exposed pulp. The laser procedure followed the manufacturers recommendations for the treatment of human pulp(1.5 Watts, 0.2 seconds, unfocused), and cavities were sealed with $I.R.M^{(R)}$. In the experimental group 2 (16 teeth), laser was irradiated on the exposed pulp in a more powerful dosage(5.0 Watts, 0.2 seconds, unfocused), and cavities were sealed with $I.R.M^{(R)}$. Two dogs were sacrificed immediately after experiment and the others were sacrificed at intervals of one, three, and eight weeks respectively. All teeth were routinely processed and the pulpal tissues and odontoblastic layers were observed by the light microscope. The results were as follows; 1. In the control group, the initial mild inflammation had improved to normal by week eight. An active formation of reparative dentin was observed at week three, and at week eight, a firm dentin bridge was present beneath the $Dycal^{(R)}$ with no inflammatory responses in the remaining pulp. 2. In the experimental group 1, immediately following irradiation, the superficial shape of the exposed pulp was crater-like. And it was lined with the coagulated layer, $60{\sim}70{\mu}m$ in width. Moderate inflammatory pulpal conditions existing at week one were improved to mild at week eight. And from the week three specimens, a reparative dentin formation was observed in the adjacent odontoblastic layer of the exposed site. A dentin bridge at the exposed site, however, did not form during the experimental period. 3. In the experimental group 2, the width of the coagulation layer lining the crater was $70{\sim}130{\mu}m$. Beneath the coagulated layer, severe inflammatory pulpal responses were observed at week one, and conditions did not improve during the experimental period.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.6
• /
• pp.644-649
• /
• 2013

Today, there are lots of progresses in the field of lens researches, especially in the microlens fabrication. Unlike normal lenses, microlens has been widely used as a role of improving the performance of photonic devices which increase the optical precision, and also used in the fields of the display. In this paper, polymer microlenses with $300{\mu}m$ diameter were replicated through hot-embossing from nickel mold which was fabricated by micro-EDM. After hot-embossing process, the polymer microlenses have a rough surface due to the crater formed by micro-EDM process, which is projected onto the surface of the lenses. The surface of polymer microlenses was polished using solvent vapor to improve the surface roughness of the microlenses without changing their shape. In the experiment, the surface roughness was improved with the processing time and vapor temperature. Also, the roughness improvement was greatly affected by the solubility difference between polymer and solvent.

• The Korean Journal of Malacology
• /
• v.27 no.3
• /
• pp.253-259
• /
• 2011

Boring behaviour and drilling mechanism were investigated by visual observations. In this study, of two kinds of holes (the outer and inner holes) which are formed by drilling of boring gastropod Lunatia fortunei (Naticidae), the diameters of the outer holes are broader and larger than those of the inner holes, and their holes look like the crater in shape, as seen in all valves of bivalves bored by Naticidae species. Two kinds of glands (the accessory boring gland and accessory salivary gland) on the foots of boring gastropods have been investigated. Of them, it has been confirmed that only the accessory salivary glands on the foots secreted sulphuric (acidic) components in the mucus (secretion), while the accessory boring glands on the foots did not secrete their components. In this study, we confirmed that L. fortunei possess the accessory boring gland on the foot, as seen in most species in Naticidae. Accoeding to the results of the experiment of the blue litmus paper tests of the mucus (secretions) secreted from the accessory boring gland the color of the blue litmus paper did not turn red in color because chemical components of mucus (secretion) secreted from the accessory boring gland on the foot of L. fortunei (boring gastropod) were not acidic components. It is supposed that the mucus, which is secreted from the accessory boring gland, contained gelatin-like substances or enzymes without acidic components, as already reported in Naticidae species. Therefore, these substances may be involved in softening the surface of the valves of M. veneriformis. Consequently, it is assumed thar L. fortunei bores holes through the shells of molluscs by means of following 3 methods: (1) a softening of the calcareous shells of M. veneriformis with chemical secretions (including gellatin-like substances or enzyme except for acidic components) from the accessory boring glands, (2) mechanical rasping with the radula, (3) a combination of both. In this study, particularly, acidic components, which are involved in softening the surface of the shells, are not associated with the boring mechanism of L. fortunei because chemical acidic components were not detected in the mucus (secretion), as found in Naticidae species.

• Korean Journal of Plant Resources
• /
• v.23 no.4
• /
• pp.350-359
• /
• 2010

The distribution of the Mankyua chejuense was restricted to the northeast region of Jeju Island. It grows in the isolated pit crater-like swamp areas of various extent and shape, where the height is lower compared to the adjacent areas, and the adjacent regions contained a evergreen broad-leaved forests, a shrubbery, and a grassland vegetation. It contained 147 taxa of 61 families, 112 genera and 147 species in the habitats. The life form of the flora showed that the habitat of M. chejuense is different from the surrounding others, in particular, the ratio of the Therophytes and the Hydrophytes appeared highly. Preservation of habitat conditions is very important for stable maintenance the flora, and the surrounding area including habitats has to be designated a protection area for habitat preservation.

• Korean Journal of Materials Research
• /
• v.19 no.5
• /
• pp.245-252
• /
• 2009

Changes in the surface morphology and light scattering of textured Al doped ZnO thin films on glass substrates prepared by rf magnetron sputtering were investigated. As-deposited ZnO:Al films show a high transmittance of above 80% in the visible range and a low electrical resistivity of $4.5{\times}10^{-4}{\Omega}{\cdot}cm$. The surface morphology of textured ZnO:Al films are closely dependent on the deposition parameters of heater temperature, working pressure, and etching time in the etching process. The optimized surface morphology with a crater shape is obtained at a heater temperature of $350^{\circ}C$, working pressure of 0.5 mtorr, and etching time of 45 seconds. The optical properties of light transmittance, haze, and angular distribution function (ADF) are significantly affected by the resulting surface morphologies of textured films. The film surfaces, having uniformly size-distributed craters, represent good light scattering properties of high haze and ADF values. Compared with commercial Asahi U ($SnO_2$:F) substrates, the suitability of textured ZnO:Al films as front electrode material for amorphous silicon thin film solar cells is also estimated with respect to electrical and optical properties.

• Korean Journal of Veterinary Research
• /
• v.31 no.1
• /
• pp.1-10
• /
• 1991

The present investigation was focussed on histochemical and electron microscopical observations of utero-vaginal(U-V) glands in U-V junctions of domestic hens. In histochemical observations, fine granules by PAS technique for mucopolysaccharides and nile blue stain for acidic lipids were slightly stained on the cytoplasm of U-V glandular epithelium. Larger granules by Sudan black B stain for neutral fat and phospholipids and Sudan III stain for neutral fat were heavily stained on the perinuclear region of the U-V gland epithelial cells. These positive materials were heavily stained on the U-V glandular epithelium of lowfecundity hens and non-laying hens. In scanning electron microscopic findings of the U-V junction surface, the orifices of U-V glands are seen as the crater-like invagination. The neck of the U-V gland and the epithelium of U-V iunction were covered by ciliated epithelial cells. Aggregates of spermatozoa are observed often to be on the necks of the U-V gland. These spermatozoa heads are embedded in the glandular tubules and many spermatozoa tails are free on the epithelium of uterine surface. In transmission electron microscopic findings, the epithelial cells of the U-V glandular orifices were ciliated, columnar cells. The apical regions of these cells contained numerous electrondense, round secretory granules of uniformly size. The epithelial cells of the U-V glandular tubule were columnar or pyramid shape with round or oval nuclei. These epithelial cells have numerous microvilli and also contained electron-dense, round secretary granules of uniformly size and electron-lucent vesicles of various size. Spermatozoa are seen as the cross-sections of various regions of heads and tails in glandular tubules. Also spermatozoa arranged longitudinally parallel within the glandular tubules.

• Journal of the Korean Society for Precision Engineering
• /
• v.5 no.1
• /
• pp.84-93
• /
• 1988

The on-line detection of the chip flow is one of the most important technologies in com- pletly automatic operation of machine tool, such as FMS and Unmanned Factories. This problem has been studied by many researchers, however, it is not solved as yet. For the recognition of chip flow in this study, the dynamic cutting force components due to the chip breaking were measured by dynamometer of piezo-electric type, and the frequency components of cutting force were also analyzed. From the measured results, the effect of cutting conditions and tool geometry on the dynamic cutting force component and chip formation were investigated in addition to the relationships between frequency of chip breaking (fB) and side serrated crack (fC) of chip. As a result, the following conclusions were obtaianed. 1) The chip formations have a large effect on the dynamic cutting force components. When chip breaking takes place, the dynamic cutting force component greatly increases, and the peridoic components appear, which correspond to maximum peak- frequency. 2) The crater wear of tool has a good effect on the chip control causing the chiup to be formed as upward-curl shape. In this case, the dymamic cutting force component greatly increases also 3) fB and fC of chip are closely corelated, and fC of chips has a large effect on the change of the situation of chip flow and dynamic cutting force component. 4) Under wide cutting conditions, the limit value (1.0 kgf) of dynamic cutting force component exists between the broken and continuous chips. Accordingly, this value is suitable for recognition of chip flow in on-line control of the cutting process.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• v.5 no.5
• /
• pp.583-591
• /
• 2018

Tool-chip adhesion impacts on cutting performance significantly, especially in finish cutting process. To promote cutting tools' anti-adhesion property, the concave micro-grooves texture (MGT) and convex volcano-like texture (VLT) were fabricated separately on lathe tools' rake faces by laser surface texturing (LST). Various orientations of MGT and different area densities (9% and 48%) and regions (partial and full) of VLT were considered in textured patterns designing. The following orthogonal cutting experiments, machining of aluminum alloy 5038, analyzed tools' performances including cutting force, cutting stability, chip shape, rake face adhesion and abrasion. It indicated that under dry finish cutting conditions, MGT contributed to cutting stability and low cutting forces, meanwhile friction and normal force reduced by around 15% and 10%, respectively with a weak correlation to the grooves' orientation. High density VLT tools, on the other hand, presented an obvious anti-adhesion property. A $5{\mu}m$ reduction of crater wear's depth can be observed on textured rake faces after long length cutting and textured rake faces presented half size of BUE regions comparing to the flat tool, however, once the texture morphologies were filled or worn, the anti-adhesion effect could be invalid. The bearing ratio curve was employed to analysis tool-chip contact and durability of textured surfaces contributing to a better understanding of anti-adhesion and enhanced durability of the textured tools.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.14 no.1
• /
• pp.22-40
• /
• 2009

Detailed bathymetry and magnetic survey data for NW Rota-1 and Esmeralda Bank obtained by R/V Onnuri of Korea Ocean Research & Development Institute in September 2007 were analyzed to investigate bathymetry and magnetic characteristics of the study area and to estimate the locations of possible hydrothermal vents. The shape of NW Rota-1 is corn type, and the depth of the summit is about 500 meter b.s.l. NW Rota-1 shows irregular topographic expression in the southeastern part. The shape of Esmeralda Bank is caldera type opened in the western part. The summit is very shallow, about 50 meter b.s.l. The western part of Esmeralda Bank is more steeper and topographic irregular than the eastern part, and have the valley made by erosion or collapse. The magnetic anomaly patterns of NW Rota-1 and Esmeralda Bank show low anomalies over the north and high anomalies over the south. The magnetic anomalies are steep over the summits and gently smooth over the deep bottom. The low magnetization zone occurs over the summit of NW Rota-1 and is surrounded by the high zones correlated with its crater. Two low magnetization zones are located in the summit and westside of Esmeralda Bank. The low magnetization zones of the summits of NW Rota-1 and Esmeralda Bank suggest the possible existence of hydrothermal vent.

• Economic and Environmental Geology
• /
• v.52 no.6
• /
• pp.561-571
• /
• 2019

The Hupo Basin, continental marginal basin, of the East Sea extends to Uljin-gun and Yeongdeok-gun. The Hupo Bank, a terrain that is higher than the surrounding seabed, is located at the eastern boundary of the Hupo Basin. KIOST(Korea Institute of Ocean Science and Technology) conducted detailed bathymetry surveys in the northern, central and southern areas of the Hupo Basin from 2011 to 2013. The Hupo Basin, bounded by steep slopes of the Hupo Bank, is deepened from the west coast to the east and deepest to a maximum depth of about 250 m. A narrow seafloor channel appears in the northern, central, and southern areas with the deepest depths. Numerous pockmarks appear on the seafloor at depths of about 150 ~ 250 m in all the three areas of the detailed bathymetry surveys. These pockmarks generally have diameters of about 20 to 50 m and depths of about 4 to 6 m, with craterlike submarine topography of various sizes. Seafloor sediments in the pockmark areas consist of fine silt. Comparing the shape and size of the pockmark of the Hupo Basin with that of other regions of the world, it is considered to be classified as a normal pockmark. There are about 7 pockmarks/1 ㎢ in the northern part of the three areas and about 8 pockmarks/1 ㎢ in the central part. The southern part has about 5 pockmarks/1 ㎢. If the area with the possibility of pockmarks is extended to the depth area of about 150 ~ 250 m in the entire Hupo Basin, the number of pockmarks is estimated to be more than about 4800. The pockmark of the Hupo Basin is more likely to be generated by a fluid such as a liquid than a gas. But it is necessary to scrutinize the cause and continuously monitor the pockmark.