• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.497-501
• /
• 2008

To improve occupants' safety in an emergency, crashworthy design is necessary to rotorcraft design and development. To improve crashworthiness capability, most of the crash energy should be absorbed by rotorcraft and the energy transmitted to the occupants should be minimized. To absorb the crash energy efficiently, the individual energy attenuation provided by landing gear, structure, fuel tank and seats should be considered totally. Especially, landing gear has the important role for crashworthy design because landing gear absorbs relatively large energy for the crash landing. In addition, military specifications require failure of landing gear shall not increase danger to any occupants by penetration of the airframe. To meet the specification requirements, failure mechanism should be prepared so that landing gear is collapsed safely and doesn't penetrate the airframe. In this study, design of failure mechanism which is necessary for the rotorcraft landing gear was performed and the results were presented.

• 선박안전
• /
• 통권23호
• /
• pp.2-13
• /
• 2007

With the effectuation of the amendment of MARPOL 73/78 on 5 April 2005, enforcement regulations of Marine Pollution Prevention Act were revised in domestic on 12 March 2005 that double hull structure was required to the small single bottom oil tankers under DWT(deadweight tonnage) 500 ton for the protection of the marine pollution casualties. The objective of this study is to develop the double bottom structure of small oil tanker under DWT 500 ton with superior crashworthiness and to establish its suitable standard to double bottom structure. The promoting strategy of this R&D is classified into the crashworthy structural analysis of small oil tankers using LS/DYNA3D code and the examination of their damage stabilities according to tonnage. It could be thought that the desirable inner bottom height should be above the B/7.5 and its minimum height 0.65m for the domestic small oil tanker under DWT 500ton.

• 한국항공우주학회지
• /
• 제46권1호
• /
• pp.18-31
• /
• 2018

회전익 항공기는 수직이착륙, 제자리비행 특성으로 일반적으로 고정익 항공기에 비해 높은 내추락 기준이 적용된다. 최근 고효율 친환경 운송시스템에 대한 요구의 증가와 더불어 항공기 구조재료로 복합재료의 적용이 증가하는 추세이다. 그러나 외부 충격, 충돌에 취약한 복합재료의 특성으로 인해 복합재 구조의 내추락 안전성 입증에 대한 요구 또한 증가하고 있다. 본 연구는 회전익항공기 적용을 위한 복합재 내추락 하부동체 구조 개념을 도출하고 이에 대한 검증을 목적으로 수행되었다. 내추락 하부동체 구조 개념 생성을 위해 기술 실증용 헬리콥터 개념설계 및 충돌에너지 흡수 요구도 산출을 수행하였으며, 복합재 충돌에너지 흡수 구조 설계 및 성능 검증을 수행하였다. 최종적으로 복합재 내추락 하부동체구조 시제 제작 및 자유낙하시험을 수행하였다. 시험 결과 분석을 통해 탑승자 생존성 확보를 위한 내추락 안전성 기준에 부합하는 결과를 확인할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.229-234
• /
• 2001

The aluminum extruded sections are used to the light construction of the high speed rail vehicle structures. However, the research works on the crashworthy design of aluminum extruded sections are not published sufficiently. In this paper, the collapse characteristics of aluminum extruded sections are investigated by crush test and simulation. The scale model studies are also performed to predict the impact energy absorption characteristics of full scale model through axial crush test and simulation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.200-206
• /
• 2001

In the standard specifications for the urban EMU(Electric Multiple Unit) train, there are several items to ensure safety against accidents. The 21th -23th items have much relation with the crashworthiness of the urban EMU train. In this study, the rubber- tired AGT(Automated Guide-way Transit System) under development by KRRI is numerically evaluated in a crashworthy point of view by applying the above crashworthiness items. The numerical results show the detail design of the AGT satisfies the 22th and 23th items. But the design is recommended to adopt mechanical fuses to reduce the impact accelerations with respect to the 21th item.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.155-162
• /
• 1999

Extruded aluminum sections are used to the light construction of the rall vehicles structures However, the research works on the crashworthy design of the extruded aluminum sections are not published sufficiently in this paper, the impact energy absorption characteristics of extruded aluminum sections are investigated by crash simulation and test The optimized energy absorbing studies are also performed based on the selected design parameter variations of the sectional shapes and the dimensional ratios.

• 한국항공우주학회지
• /
• 제41권9호
• /
• pp.740-746
• /
• 2013

항공기, 자동차를 포함하는 모든 수송수단 설계에 있어서 내추락성 설계가 강조되고 있으나, 심각한 부상 또는 사망으로 이어지는 사고는 지속적으로 발생해 왔고, 앞으로도 발생할 것이다. 심지어 생존 가능으로 분류되는 사고에서조차도 상당한 수준의 인명사고가 있어 왔음은 주지의 사실이다. 그러나 이러한 사고들이 반드시 불가피하다고만 할 수는 없다. 만약 좌석, 구속장치, 탑승공간 강도조건 등 탑승자 보호계통이 적절히 또는 바르게 설계된다면 추락상황에서의 생존성은 획기적으로 증대될 수 있다. 이를 위해서는 급격한 가속도 변화환경에서의 인체 허용한도 특성을 충분히 이해해야 하며, 이를 바탕으로 인체 허용한도 제한치 이내에서 하중조건이 유지되도록 탑승공간을 설계하여야 한다. 본 논문에서는 급격한 가속도 변화환경에서의 인체 허용한도의 중요성과 예측되는 추락환경 변화에 따른 설계요구도 변화 필요성을 강조함으로써 내추락성 설계에 대한 공감대를 넓히고자 한다.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.241-245
• /
• 2012

In this study, one type of circular shaped composite tube was used, combined with reinforcing foam and without foam. Furthermore, CFRP (Carbon Fiber Reinforced Plastic) circular member manufactured from CFRP prepreg sheet for lightweight design. CFRP is an anisotropic material which is the most widely adapted lightweight structural member. The crashworthy behavior of circular composite material tubes subjected to static axial compression under same conditions is reported in this paper. The collapse mode during the failure process were observed and analyzed. The behavior of polymeric foams to the tubes crashworthiness were also investigated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.318-321
• /
• 2005

Crashworthy design of a train is a systematic approach to ensure the safety of passengers and crews in railway transportation for the prescribed accident scenarios. This approach needs new structural arrangements and designs to absorb higher levels of impact energy in a controlled manner and interior designs to minimize passenger injuries. In this paper, an evaluation method for crashworthiness of Korean tilting train express is introduced. Crush characteristics for each part of tilting train express are evaluated numerically through 3-dimensional shell element analysis with LS-DYNA. Based on a head-on collision and a level crossing collision scenarios, the crash behaviors of tilting train express are evaluated numerically using full-rake collision simulations.

• 한국생산제조학회지
• /
• 제19권5호
• /
• pp.603-608
• /
• 2010

In this study, one type of circular shaped composite tube was used, combined with reinforcing foam and without foam. Furthermore, CFRP(Carbon Fiber Reinforced Plastic) circular member manufactured from CFRP prepreg sheet for lightweight design. CFRP is an anisotropic material which is the most widely adapted lightweight structural member. The crashworthy behavior of circular composite material tubes subjected to static axial compression under same conditions is reported in this paper. Test was executed in order to compare the results to the energy absorption and collapse shape. The collapse mode during the failure process were observed and analyzed. The behavior of polymeric foams to the tubes crashworthiness were also investigated. According to the experimental results, specimens filled with foam are higher total energy absorption than the other specimens not filled with the foam.