• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.165-170
• /
• 1995

소음저감 설계기술은 제품의 경쟁력 향상을 위해 일반인이 쉽게 접근할 수 잇는 가전제품, 자동차, 항공기 분야 등에서 많은 연구가 수행되어 왔으며, 최근 소음환경 규제가 강화되고 대형기계의 설치 위치가 주거지역과 가까워지므로 산업용 기계설비의 소음제어에 대한 관심이 점차 증대되고 있다. 특히 디젤 엔진 발전기 세트를 이용해서 전원을 공급하는 산업용 기계에 있어서는 디젤 엔진과 발전기가 주소음원이며, 크게 기계적 소음, 공기 역학적 소음, 그리고 전자기 소음 등으로 분류된다. 본 연구는 이러한 소음을 발생시키는 엔진(Engine), 발전기(Generator), 방열팬(Radiator Fan) 등의 성능을 개선시켜 소음을 감소시키는 것이 아니라, 외부 덮개(Canopy)에 흡음재를 부착하여 소음저감 방법을 채택했다. 연구대상으로서는 항만에서 컨테이너(Container)를 운송하는 이동용 크레인(Transfer Crane)의 엔진 발전기 세트(set)로서, 각 구성품(엔진, 발전기, 방열 팬)의 음향 덮개의 내부구조를 설계하였다. 그리고 덮개 내부 온도를 일정하게 유지시키기 위하여 엔진에서 방사하는 방열공기와 내부로 흡입되는 냉각공기의 열유동장 해석도 병행하였다.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.3
• /
• pp.91-108
• /
• 1998

Automated Storage and Retrieval Systems (AS/RSs) are an important facility for modern material management. The expected benefits of these capital-intensive facilities are gained when their control policies and their physical design parameters are determined simultaneously. In this paper we present several analytical models that capture the impact of the storage assignment policy and of the rack design on the expected storage and retrieval times. Sequential and interleaved service modes are considered for sequencing the storage and retrieval requests. We further investigate the impact of the rack structure on the relative performance of the following storage assignment policies : closest open location (random), full turnover-based policy, and class-based. Our analysis clearly indicates that significant savings in crane travel time are realized when implementing full turnover-based policy, rather than random. These savings become more and more pronounced as the profile of the storage racks approaches the square-in-time shape. Furthermore, it is shown that a class-based policy, with a small number of storage classes, will capture most of these savings and be easier to manage in practice.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.219-223
• /
• 2006

This paper presents a gantry type 3-axes positioning system, which is useful to test control algorithms for coordinate measuring machines and industrial cranes. The dynamic characteristics of the system have been investigated through a series of finite element analysis and experiments. In order to minimize the residual vibration during movement, this paper implements input shaping algorithms for the system with the information from the dynamic analysis. The results show that the dynamic performance of the system can be significantly improved by the dynamic analysis and implementation of input shaping

• Journal of the Korean Institute of Intelligent Systems
• /
• v.4 no.1
• /
• pp.3-12
• /
• 1994

본 연구는, 복잡한 비선형시스템의 표현에 뛰어난 능력을 갖고 있는 TSK형 퍼지모델로 부터 전체시스템의 안정성을 보장할 수 있는 퍼지상태제어기의 설계방법을 제안한다. 그 퍼지상태제어기는 TSK형 퍼지모델과 같은 형태의 퍼지규칙들로 구성되며, 추론 방법 및 상태제어 파라미터 행렬을 구하는 방벙은 전체시스템의 상태천이행렬이 원하는 안정한 것이 될 수 있도록 정해진다. 또한 본 논문에서는, 현재 대부분이 숙련가에 의해 수동으로 조작되고 있는 컨테이너 크래인의 새로은 제어 방법을 제시하고 제안한 퍼지상태제어기를 적용한다.컨테이너 크래인의 모형을 만들어, 제어숙련가의 수동조작으로 결정되는 트롤리와 승강기의 규범속도를 퍼지모델로 표현하고, 트롤리와 승강기가 그 규범 속도에 따르도록 제안한 퍼지상태제어기로 제어한다. 제안된 방법을 실험한 결과 모형크레인의 궤적이 숙련가에 의해 만들어진 궤적과 매우 유사하게 됨을 알 수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.197-202
• /
• 1996

The dynamic interaction between a translating flexible arm and a trapezoidal velocity profile of a cart to which the flexible arm is attached is presented. Vibration of the flexible arm due to translation is analytically solved, and the conditions for suppressing vibration is derived in terms of velocity profiles. To prove the validity of the solution and the conditions, numerical computation and experiments are camed out. Only a natural frequency of vibrating plant is needed to obtain the conditions for vibration reduction. With this results, a passive vibration regulator as an open loop control scheme can be designed and direct application to industrial plants such as overhead crane can be made.

• Advances in concrete construction
• /
• v.14 no.2
• /
• pp.131-137
• /
• 2022

Based on the design of reinforced concrete columns in Chinese design codes, the failure function of reinforced concrete (RC) columns cannot be expressed as a linear function. This makes it difficult to reveal the level of reliability control in Chinese design code. Therefore, the failure function of dimensionless form is established in this paper, and the typical components (Industrial plant columns) are selected for analysis. At last, numerical simulation proves that the proposed model can be used to analysis reliability of columns. The results based on this model indicate that there is a strong difference in the reliability of RC columns designed with different design parameters, and the reliability would be lower when the eccentricity produced by crane load is smaller.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.323-330
• /
• 2009

We have been developing an underwater robot for harbour construction using a parallel mechanism The robot is attached to the rope of a crane, which curries a large stone into the undersea The robot's yaw and pitch are controlled by hydraulic cylinders but its roll is uncontrollable. We mount propellers in both side of the robot to generate the roll motion This paper studies on the control for the roll motion of a underwater robot. A gyro-sensor is used to measure the angle in a roll motion We develop the dynamic model to describe the robot's roll motion by a second order non-linear system and identify the model parameters by recursive least square and adaptive identifier. PD control, recursive model based control and adaptive model based control are applied with the dynamic model which computes the control input to compensate disturbances. This paper introduces the underwater robot system and presents the simulated and experimental results of the proposed controller.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.56.1-56.1
• /
• 2015

The GMT-Consortium Large Earth Finder (G-CLEF) is the very first light instrument of the Giant Magellan Telescope (GMT) and an optical-band echelle spectrograph. The Flexure Control Camera (FCC) is one of the major contributions of KASI's for the spectrograph project. FCC system includes the Fiber Mirror monitoring and the on- and off-slit mode auto-guidance algorithm. In this study, we present the modified design of the FCC optics and opto-mechanics after the G-CLEF Preliminary Design Review (PDR) held in Cambridge in April 2015.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.708-713
• /
• 2004

This research develops a sensorless hydraulic servo system of Parallel-Typed robot for harbour construction. Purpose of the robot is to mechanize the construction, which is accomplished through a joystick's operating by a stoneworker (or diver). The robot is attached on the end of an excavator as its attachment or transported by a crane to reach the desired place. The embedded compact controller is installed on the robot body and controlled by wireless telecommunication. For underwater work, it is necessary to waterproof the robot and its sensors. Especially, a sensor waterproof is a main drawback for the underwater robot. This leads us to develop a hydraulic robot position controller using an observer which gives the position information without any position sensor. We design a neural network to identify the displacement change according to the command voltage to servo valve. To verify the sensorless controller, this paper presents the performance of the sensorless control for which the position is given by the observer comparing with that of the sensor control for which the position is measured by LVDT sensors.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.3 s.180
• /
• pp.110-117
• /
• 2006

This paper presents the acceleration optimization of a high-speed LCD (Liquid Crystal Display) transfer system for the minimization of vibration. To reduce vibration is one of key requirements for the dynamic control of a high-speed LCD transfer system. In this paper, the concept of finite jerk (the first derivative of acceleration) has been introduced for realizing input acceleration. The profile of finite jerk has been optimized using a genetic algorithm so that vibration effect can be minimized. In order to incorporate a genetic algorithm, the dynamic model of a LCD transfer system which is realized by using the ADAMS software has been linked to the simulation system constructed by the MATLAB. The simulation results illustrated that the duration of finite jerk can be optimized so as to minimize the magnitude of vibration. It has been also shown that the acceleration optimization with finite jerk can make the high-speed motion of a LCD transfer system result in low vibration, compared with the conventional motion control with trapezoidal velocity profile.