• Korean Journal of Computational Design and Engineering
• /
• v.8 no.2
• /
• pp.109-114
• /
• 2003

In order to develop the reduced tire modal model for analyzing a full tire model, the Craig-Bampton method is utilized in this paper. When the tire contacts the road, the Abaqus solver extracts the condensed stiffness, coupled mass and mode shape matrix about the node, which contacts the road. The Abaqus full tire model is reduced using the substructure method utilizing Craig-Bampton algorithm. Then, the extracted matrices are interfaced with the superelement, which is fed to the Nastran reduction algorithm. Eventually, the reduced tire model is verified from experiment and various reduction parameters (i.e. modal number, reduction point, etc.) are studied for the effectiveness of the proposed paper.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.60-66
• /
• 2006

This paper is a study on the coupled load analysis using MSC/Nastran superelement method. After selecting the hunch vehicle, coupled load analysis is performed. From the results of coupled load analysis the loads and displacements on the major parts of satellite structure are calculated Based on the loads and displacements, the safety of satellite structure is judged. Coupled load analysis has been executed using MSC/Nastran DMAP code so far. Because DMAP code was very complicated and long in 1ength it was difficult to analyze and modify the DMAP code. To solve out these problems, coupled load analysis was executed using MSC/Nastran 2005 superelemnt method. At first, satellite FE-model was converted to the Craig-Bampton model using MSC/Nastran 2005 superelement method and verified Finally, coupled load analysis was performed using satellite Craig-Bampton model and launch vehicle FE-model and verified.

• Composites Research
• /
• v.32 no.5
• /
• pp.243-248
• /
• 2019

As demand of light weight in the automotive industry has increased, the cowl cross member has been investigated using various methods to change the material. Conventionally, a cowl cross member has been made of steel and aluminum, but recently researchers tested multi-material such as aluminum and plastic. We studied a new model of the cowl cross member made of composite and non ferrous materials. For products with a high degree of freedom in design, generally, the method of topology optimization is advantageous and for the partial bracket part of the cowl cross member had a degree of freedom in the design, a topology optimization is appropriate. Considering the characteristics of the cowl cross members, we need research to minimize the weight while having the performance of noise, vibration and harshness(NVH). Taking the mounting status of the product into consideration, we used an assembly model to optimize the cowl cross member. But this method took too much time so we considered simple cowl cross member assemble conditions using the direct matrix input method(DMI) with the Craig-Bampton Nodal Method. This method is capable of considering the status of the assembly without assembling the model, which reduced the solving time and increased the accuracy comparison with a cowl cross member without DMI.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.3
• /
• pp.175-182
• /
• 2022

In many engineering problems, the dynamic substructuring can be useful to analyze complex structures which made with many substructures, such as aircrafts and automotive vehicles. It was originally intended as a method to simplify the engineering problem. The powerful advantage to this is that computational efficiency dramatically increases with eliminating unnecessary degrees-of-freedom of the system and the system targets are concurrently satisfied. Craig-Bampton method has been widely used for the linear system reduction. Recently, multi-level optimization (such as target cascading), which propagates the system-level targets to the subsystem-level targets, has been widely utilized. To this concept, the genetic algorithm which one of the global optimization technique has been utilized to the substructure optimization. The number of internal modes for each substructure can be obtained by the genetic algorithm. Simultaneously, the reduced system meets the top-level targets. In this paper, various numerical examples are tested to verify this concept.

• Structural Engineering and Mechanics
• /
• v.65 no.4
• /
• pp.359-368
• /
• 2018

Dynamic analysis of complex and large structures may be costly from a numerical point of view. For coupled vibroacoustic finite element models, the importance of reducing the size becomes obvious because the fluid degrees of freedom must be added to the structural ones. In this paper, a component mode synthesis method is proposed for large vibroacoustic interaction problems. This method couples fluid subdomains and dynamical substructuring of Craig and Bampton type. The acoustic formulation is written in terms of the velocity potential, which implies several advantages: coupled algebraic systems remain symmetric, and a potential formulation allows a direct extension of Craig and Bampton's method to acoustics. Those properties make the proposed method easy to implement in an existing finite element code because the local numerical treatment of substructures and fluid subdomains is undifferentiated. Test cases are then presented for axisymmetric geometries. Numerical results tend to prove the validity and the efficiency of the proposed method.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.46-50
• /
• 2011

In order to perform the satellite structural analysis, FE-Model(Finite Element Model) considering all mechanical properties is necessary. Generally, different companies develop several satellite components, and sometimes it is very difficult to obtain FE-Model. In this case, FE-Model reduction using superelement method can be good solution. For developing satellite, antenna manufacturer required satellite FE-Model to calculate microvibration induced by antenna operation, and condensed model using superelement method was provided. Superelement method is based on Craig-Bampton method, and it is applied to spacecraft FE-Model reduction in this paper. From modal analysis and the frequency response analysis results between full FE-Model and condensed model, the usefulness of reduced model is confirmed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.8
• /
• pp.8-17
• /
• 2019

In this study, a model reduction technique was used to develop a precise noise and vibration prediction model for the individual components of a driveline system. The dynamic reduced-order model generated by the Craig-Bampton method was applied to perform dynamic analysis of an electric agricultural power cart. The natural frequency and acceleration response results were analyzed according to the different number of dominant sub-structural modes contained in the reduced-order models. Through the analysis results, it was confirmed that a sufficient number of dominant sub-structures to satisfy the operating conditions should be selected to construct an optimal reduced-order model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.519-525
• /
• 2010

The finite element (FE) method is generally used to model and simulate the physical behavior of large structures, such as passenger vehicles or aircraft. However, FE analysis involves a very large computation time and cost for developing the analysis model. Therefore, the vibration characteristics of large structural systems are often analyzed using the component mode synthesis (CMS) method, which is one of the substructure synthesis methods. In this study, the vibration characteristics of passenger vehicles are analyzed by using the substructure synthesis method. A passenger vehicle model, which includes a vehicle body, suspension systems, and a sub-frame, is presented. The physical components of the vehicle system are modeled as equivalent substructures using the Craig-Bampton method of CMS. The vibration characteristics, such as the natural frequencies and mode shapes and frequency response, of the vehicle system are determined. The effects of variations in some design parameters on the vibration characteristics of the full vehicle model are also investigated.

• Earthquakes and Structures
• /
• v.17 no.1
• /
• pp.101-113
• /
• 2019

Earthquake-induced pounding is one of the major reasons for structural failure in earthquake prone cities. An accurate description of the pounding phenomenon of two buildings requires the consideration of systems with a large number of degrees of freedom including adequate contact impact formulations. In this paper, firstly, a node to surface formulation for the realization of state-of-the-art pounding models for structural beam elements is presented. Secondly, a hierarchical substructure technique is introduced, which is adapted to the structural pounding problem. The numerical accuracy and efficiency of the method, especially for the contact forces, are verified on an academic example, applying four different impact elements. Error estimations are carried out and compared with the classical modal truncation method. It is demonstrated that the hierarchical substructure method is indeed able to significantly speed up the numeric integration procedure by preserving a required level of accuracy.

• Advances in aircraft and spacecraft science
• /
• v.5 no.2
• /
• pp.251-258
• /
• 2018

This work illustrates the progress of a TAS activity at exploring the challenges and the benefits of the Virtual Shaker Testing (VST) approach. The definition and the validation of new computational methodologies with respect to the state of the art were encouraged throughout this activity. The shaker Finite Element (FE) model in lateral configuration was built for the purpose and it was merged with the SpaceCraft (S/C) FE model, together with the S/C-Shaker adapter. FE matrices were reduced through the Craig-Bampton method. The VST transient analysis was performed in MATLAB(R) numerical computing environment. The closed-loop vibration control is accounted for and the solution is obtained through the fourth-order Runge Kutta method. The use of pre-existing built-in functions was limited by authors with the aim of tracing the impact of all the problems' parameters in the solution. Assumptions and limitations of the proposed methodology are detailed throughout this paper. Some preliminary results pertaining to the current progress of the activity are thus illustrated before the conclusions.