• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.80-85
• /
• 1991

This experimental study was performed to derive the relationship between the measured values(corrosion potential) and the actual amount of corrosion products(reinforcing steel weight loss rate). Also the growth of crack due to the steel corrosion was oberved. First, the reinforcing steel of R/C specimen was corroded with chloride penetration and accelerated galvanostatic corrosion method. And then, the corrosion potential of reinforcing steel was measured with nondestructive tester.

• Journal of the Korean Wood Science and Technology
• /
• 제17권1호
• /
• pp.55-68
• /
• 1989

This experiment was carried out to investigate the crack of coated Nitrocellulose Lacquer on flatand edge-grained boards of Quercus acutissima, ring-porous wood, and Betula platyphylla var. japonica, diffuse-porous wood, by variations of moisture contents at 7, 13 and 21%. Cold check system was used as an accelerating method for crack development, in which one cycle of the system consisted of 10 replications of each unit cycle, $60^{\circ}C$ for 4hr followdd by $-20^{\circ}C$ for 4hr. The analysis of Nitrocellulose Lacquer characteristics was made by means of water permeation measurement, F.T.I.R. spectroscopy, N.M.R. spectroscopy, gel permeation chromatography, gas chromatography, and D.S.C. The results obtained were as follows: 1. The number of cracks increased with the increasing moisture content of board. 2. The crack of coated film on flat-grained board was fewer in number than on edge-grained board. 3. The crack occurred in Quercus acutissima was more numerous on edge-grained board but less frequent on flat-grained board compared with that in Betula platyphylla var. japonica, respectively. 4. The cold crack vertically developed to the grain both in Quercus acutissima and Betula platyphylla var. japonica. 5. Water permeability in intermediate coated film was lower than in under and top coated film, but the difference was not confirmed between under and top coated film.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1218-1226
• /
• 1993

본 연구에서는 기존의 점진균열법을 개량하여 원판의 잔류응력 분포를 측정하기 위한 새로운 방법을 제시하였으며 이것의 타당성을 입증하기 위한 유한요소 해석(finite element analysis)과 실험을 수행하였다.

• 비파괴검사학회지
• /
• 제33권1호
• /
• pp.7-13
• /
• 2013

철강 생산 제품 중 강선 (steel wire rod)은 제조 과정 중 종방향으로 미세한 표면 결함이 매우 빈번하게 발생하는데 이중 깊이가 수 십 마이크로미터 이상인 결함들은 최종 생산품의 불량을 유발하는 심각한 원인이 되고 있다. 이와 같은 이유로 강선의 제조 단계에서 표면의 미세 결함의 깊이를 평가하는 방법의 개발이 절실히 요구된다. 표면 미세 결함을 평가할 수 있는 여러 가지 방법 중에서, 본 연구에서는, 전자기 음향공진법의 적용 가능성을 고찰하고자 한다. 전자기 음향 공진 (electromagnetic acoustic resonance, EMAR)은 전자기 음향 트랜스듀서 (electromagnetic acoustic transducer, EMAT)을 이용하여 시편의 공진 특성을 측정하는 방법으로서, 대상의 작은 변화에도 민감하게 반응하고 비접촉 측정이 가능하여 현장 적용에 용이하다는 장점이 있다. 전자기 음향 공진 실험을 통하여 표면 미세결함과 잔향특성의 변화를 관찰하여 깊이 약 100 마이크로미터 내외의 결함은 탐상 가능함을 확인하였다.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.65-75
• /
• 1998

The fracture resistance curve is one of most important and design techniques employed in nuclear pressure vessel structures. This study is to evaluate the J-R curve characteristics for the SA508C-3 by the unloading compliance method and load rato analysis. The effect of strain aging for the exponential correlation of the J-R curve in this metal are investigated at room temperature, 20$0^{\circ}C$ and 30$0^{\circ}C$. The load ratio analysis method can evaluate the J-R curve by using the simple tension load-displacement curve only without the repeat of the unloading and loading. Therefore, the analysis by the proposed load ratio method has a merit, in comparison with the unloading compliance method, which can measure the crack length without the precision measurement equipment.

• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.1999-2010
• /
• 1992

본 연구에서는 (1)의 방법의 문제점.즉, 두꺼운 판에 강체 균열을 열매립하는 과정에서 균열 첨단에 열변형이 일어나, 변위측정시 측정 오차가 발생하는 점을 해결 하기 위해, 매유 얇은 P.V.C.판(t=0.15mm)에 강체 균열을 열매립 하는 대신 접착제로 부착하는 방법을 채택하여 강체균열 경계상의 곡률 영향을 검토하였으며, (2)의 방법 의 해결책으로서, 강체균열에서 충분히 먼곳의 곡률은 얇은 합금공구강판(alloy tool steel plate`t=1mm)으로 제작한 프레임(Frame)으로 원방곡률을 미리 슬랩 경계조건과 일치하도록 하였고, 또한 변위도 고정(동결)할수있는 새로운 고정 하중장치를 개발하 여 실험 측정치의 정도를 높였다.

• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1382-1390
• /
• 1995

Electronic Speckle Pattern Interferometry (ESPI) with a CW laser, a video system and an image processor was utilized to measure the in-plane displacement. Unlike traditional strain gauges or Moire method. ESPI method measure the in-plane displacement on real time with out any surface preparation on surface attachment. The specimen has a crack of 10*0.1 mm in the middle of plate and strain gauge was also attached on that surface to compare with ESPI method. This study reveled the ESPI method to measure the displacement and distribution of strain in the specimen. It was shown in tensile tests that the measurement by ESPI method was comparable with strain gauge.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3105-3114
• /
• 1993

previously, several basic studies in the experimental analysis of stress intensity factors of cracks by slab analogy have been presented by authors. But, for the application of above mentioned method to the analysis of the arbitrarily distributed cracks, there still is several bottlenecks to be overcome in terms of its experimental process and data treatment. Moreover, authors recently proposed an improved experimental method to use the fixed slab analogy device which has promised more accurate measurement of S.I.F. of small cracks. In this paper, for the completion of slab analogy analysis of distributed cracks, a grating imaginary rotation method is introduced. And, to prove its validity, this combined method is applied to the determination of stress intensity factors of theoretically known distributed cracks. The results show good agreement with the existing theoretical solutions and physical crack propagation tendencies.

• 대한치과의사협회지
• /
• 제50권1호
• /
• pp.22-30
• /
• 2012

The methods for the occlusal force measurement have long been developed. The occlusal analyzing equipment utilizing the pressure-sensitive film (Prescale) is useful for the assessment and comparison among large group of patients. On the other hand, the apparatus which uses the grid-based sensor sheet (T-scan) can be a useful assistant for acquiring the well-balanced occlusion. The device that can process the electrical input from the strain gauge which is attached to the tooth surface can collect the dynamic data of actual masticatory force. This device has been developed for the measurement of actual mastication with the food bolus and it can be a useful method for the comparison before and after the restorative treatment. Occlusal force measurement can be applied for the analysis of therapeutic action, diagnosis of crack- tooth syndrome, temporomandibul ar disease, and idiopathic implant loosening.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.138-146
• /
• 1996

The presence of a damage, such as a crack, in a structure increases the flexibility and damping in the structure. Most of methods to detect damage or damage location uses stiffness matrix of the structural system. The modification of stiffness matrix, however, has complicated procedures to identify structural. system in the basis of finite element model and has too many degree of freedom to calculate. Identification of changes of flexibility of structure can offer damage information immediately and simple procedure can employ real time continuous monitoring system. To identify changes of the flexibility, vibration mode shapes and natural frequencies are usually used. In this paper, a procedure for damage location in continuous girder bridges using vibration data is described. The effectiveness and sensitivity of the presented method to measurement errors in mode shapes and natural frequencies are investigated using analytical results from finite element models. It is shown that the errors in the first mode shape and first natural frequency demonstrate much larger influence than those in the higher mode shapes and modal frequencies.