• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.201-206
• /
• 2012

Horse manure general composition and contaminants, heavy metals content analysis was investigated as follows. The moisture content of horse feces was 76.1% and 96% for horse urine. The average T-N, T-P, T-K concentrations of the racing horse were 0.18%, 0.10%, 0.22% respectively and 2.88%, 0.0015%, 0.84% for urine. And the average BODs, COD, SS concentrations were 26,906 $mg/{\ell}$, 36,642 $mg/{\ell}$, 89,375 $mg/{\ell}$ respectively and 14,298 $mg/{\ell}$, 7,484 $mg/{\ell}$, 6,987 $mg/{\ell}$ for urine. In addition, the Cr, Cu, Ni, Cd, Pb, Zn concentrations of feces were 2.65 mg/kg, 7.05 mg/kg, 1.24 mg/kg, 0.07 mg/kg, 0.01 mg/kg, 45.11 mg/kg respectively and 1.52 mg/kg, 1.62 mg/kg, 0.00 mg/kg, 0.03 mg/kg, 0.03 mg/kg, 4.49 mg/kg for urine on the fresh matter basis. The end of the survey was that the quality of the compost can be used as a raw material, and manure is necessary to constantly driven forward horse manure composting research.

• Applied Biological Chemistry
• /
• v.41 no.2
• /
• pp.181-186
• /
• 1998

The effects of sewage treatment on characteristics of sludge as a composting material were investigated for a year during the initial operation at the full-scale Chunan sewage treatment plant. Due to the shortage of design capacity of belt press, a sludge dewatering unit, non-volatile solids were recirculating and concentrating in the treatment plant, resulting in an increase of MLSS and a decrease in F/M ratio at the activated sludge system. Special attention is required for long term operations since the increase of non-volatile solids in the plant would deteriorates the treatment efficiency. The sewage sludge of the Chunan sewage treatment plant showed 79.5% of water content, 11.6% of organic content, and C/N ratio of 6.1, and contained As 1.8 mg/kg, Cd 27 mg/kg, Hg <0.1 mg/kg, Pb 54 mg/kg, T-Cr 370 mg/kg, and Cu 1,100mg/kg of heavy metals. In order to be used as raw material for optimum composting, the sewage sludge requires bulking agents for moistrure/porosity control and a carbon source for adjusting C/N ratio. However, the sewage sludge is not adequate as a soil conditioner after composing due to a high content of heavy metals. If the sewage sludge has to he used as a soil conditioner after composting, it as required to identify and remove tire industrial wastewater portions in tire influent of the plant since heavy metals in the influent were mostly concentrated in dewatered sludge.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.699-709
• /
• 2017

We measured the grain size, total organic carbon (TOC), total nitrogen (TN), and heavy metals (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, and Zn) in order to understand the spatial distribution and pollution level of organic matter and metals in surface sediment around Goseong Bay, a shellfish farming area, Korea. The surface sediments were composed of finer sediments such as mud and clay. The concentration of TOC, TN, and heavy metals were much higher in the innermost bay than in the mouth and outside of bay. The spatial distribution of organic matter and heavy metals and C/N ratio (5-10) in sediment showed that the organic matter and heavy metals in sediment of the study region were significantly influenced by oceanic origin organic matter and anthropogenic sources, respectively. Based on the results of four assessment techniques (sediment quality guideline, geoaccumulation index, pollution load index, ecological risk index), the sediments around the Goseong Bay were a little polluted for heavy metals and the high metal concentrations in the northern region of bay could adverse impact on benthic organisms in sediment. Thus, the systematic management plan for the improvement of water and sediment environment and the concentrated monitoring of pollutants for sustainable aquaculture and seafood safety around Goseong Bay are necessary in the future.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.56-72
• /
• 1999

Airborne concentrations of welding fumes in which 13 different metals such as Al, Cd, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Si, Sn, Ti, and Zn were analyzed were measured at 18 factories including automobile assembly and manufactures, steel heavy industries and shipyards. Air samples were collected by personal sampler at each worker's worksite(n=339). Blood levels of Cd, Cu, Fe, Mn, Pb and Zn were also measured from samples taken from 447 welders by atomic absorption spectrometry and compared with control values obtained from 127 non-exposed workers. The results were as follows ; 1. Among various welding types, $CO_2$ welding 70.2 % were widely used, shielded metal arc welding(SMAW) 22.1 % came next, and rest of them were metal inert gas(MIG) welding, submerged arc welding(SAW), spot welding(SPOT) and tungsten inert gas(TIG) welding. 2. Welding fume concentration was $0.92mg/m^3$($0.02{\sim}15.33mg/m^3$) at automobile assembly and manufactures, $4.10mg/m^3$($0.02{\sim}70.75mg/m^3$) at steel heavy industries and $5.59mg/m^3$($0.30{\sim}91.16mg/m^3$) at shipyards, respectively, showing significant difference among industry types. Workers exposed to high concentration of welding fumes above Korean Permissible Exposure Limit(KPEL) amounted to 7.9 % and 12.5 %, in $CO_2$ welding and in SMAW at automobile assembly and manufactures and 62.7 % in $CO_2$ welding, and 12.5 % in SMAW at shipyards, and 66.2 % in $CO_2$ welding and 70.6 % in SMAW at steel heavy industries. 3. Geometric mean of airborne concentration of each metal released from welding fumes was below one 10th of KPEL in all welding types. Percentage of workers, however, exposed to airborne concentration of metals above KPEL amounted to 16.8 % in Mn and 7.6 % in Fe in $CO_2$ welding; 37.5 % in Cu in SAW, 30 % in Cu in TIG; and 25 % in Pb in SPOT welding. As a whole, 76 Workers(22.4%) were exposed to high concentration of any of the metals above KPEL. 4. There were differences in airborne concentration of metals such as Al, Cd, Cr, Cu. Fe. Mn, Mo, Ni, Pb, Si, Sn, Ti and Zn by industry types. These concentrations were higher in shipyards and steel heavy industries than in automobile assembly and manufactures. Workers exposed to higher concentration of Pb above KPEI amounted to 7.4 % of workers(7/94) in automobile assembly and manufactures. In shipyards, 19.2 % of workers(19/99) were over-exposed to Mn and 7.1 % (7/99) to Fe above KPEL. In steel heavy industries, 14.4 %(21/146), 7.5 %(11/146) and 13 %(19/146) were over-exposed to Mn, Fe and Cu, respectively. As a whole, 76 out of 339 workers(22.4%) were exposed to any of the metals above KPEL. 5. Blood levels of Cd, Cu, Fe, Mn, Pb, and Zn in welders were $0.11{\mu}g/100m{\ell}$, $0.84{\mu}g/m{\ell}$, $424.4{\mu}g/m{\ell}$, $1.26{\mu}g/100m{\ell}$, $5.01{\mu}g/100m{\ell}$ and $5.68{\mu}g/m{\ell}$, respectively, in contrast to $0.09{\mu}g/100m{\ell}$, $0.70{\mu}g/m{\ell}$, $477.2{\mu}g/m{\ell}$, $0.73{\mu}g/100m{\ell}$, $3.14{\mu}g/100m{\ell}$ and $6.15{\mu}g/m{\ell}$ in non-exposed control groups, showing significantly higher values in welders but Fe and Zn.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.4
• /
• pp.31-39
• /
• 2017

From July to August 2013, liquid fertilizers produced at 180 liquid manure public resource centers and liquid fertilizer distribution centers were collected. The maturity of liquid fertilizers was measured using the mechanical maturity measurement device. The nutrient contents (nitrogen, phosphorus, and potassium), physicochemical properties, and heavy metal content of 46 liquid fertilizers were investigated in this study. We used a matured liquid fertilizer with a total number of 46, with number of 7 for Gyeonggi-do, 3 for Chungcheongbuk-do, 2 for Chungcheongnam-do, 13 for Jeollabuk-do, 5 for Jeollanam-do, 3 for Gyeongsangbuk-do, 11 for Gyeongsangnam-do, 1 for Daejeon, and 1 for Jeju-do. The physicochemical properties were as follows: pH 8.0, EC 11.6 mS/cm, SS 5,188 mg/L, TKN 847mg/L, ${{NH_4}^+}-N$ 317 mg/L, ${{NO_3}^-}-N$ 170 mg/L, Org-N 360 mg/L, TP 193 mg/L, and TK 2,557 mg/L. The total amount of NPK was 3,596 mg/L. The total amount of N-P-K was as follows: a number of 2 at 1,000-2,000 mg/L (4%), a number of 17 at 2,000-3,000mg/L (37%), a number of 11 at 3,000-4,000mg/L (24%), and a number of 16 at 4,000mg/L or more (35%). Thus, 41% of the mature liquid fertilizers were below the official standard of commercial fertilizer (livestock manure liquid fertilizer) (0.3% of the total amount of N-P-K). Most of the N-P-K total amount showed non-uniform characteristics of low nitrogen and low phosphoric acid due to the potassium concentration. The average heavy metal content in the matured liquid fertilizer was as follows: As, not detected; Cd, 0.01 mg/kg; Hg, not detected; Pb, 0.02 mg/kg; Cr, 0.14 mg/kg; Cu, 6.89 mg/kg; Ni, 0.44 mg/kg; and Zn, 20.70 mg/kg. Thus, the official standard of commercial fertilizer was satisfied in all categories, indicating a safe level.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.418-429
• /
• 2011

Novel chromium(III), manganese(II), iron(III), cobalt(II), nickel(II), copper(II), ruthenium(III), and zirconyl(II) complexes of $N^1,N^2$-bis(3-((3-hydroxynaphthalen-2-yl)methylene-amino)propyl)phthalamide ($H_4L$, 1) have been synthesized and characterized by elemental, physical, and spectral analyses. The spectral data showed that the ligand behaves as either neutral tridentate ligand as in complexes 2-5 with the general formula $[H_4LMX_2(H_2O)]{\cdot}nH_2O$ (M=Cu(II), Ni(II), Co(II), X = Cl or $NO_3$), neutral hexadentate ligand as in complexes 10-12 with the general formula $[H_4LM_2Cl_6]{\cdot}nH_2O$ (M=Fe(III), Cr(III) or Ru(III)), or dibasic hexadentate ligand as in complexes 6-9 with the general formula $[H_2LM_2Cl_2(H_2O)_4]{\cdot}nH_2O$ (M = Cu(II), Ni(II), Co(II) or Mn(II), and 13 with general formula $[H_4L(ZrO)_2Cl_2]{\cdot}8H_2O$. Molar conductance in DMF solution indicated the non-ionic nature of the complexes. The ESR spectra of solid copper(II) complexes 2, 5, and 6 showed $g_{\parallel}$ >g> $g_e$, indicating distorted octahedral structure and the presence of the unpaired electron in the $N^1,N^2$ orbital with significant covalent bond character. For the dimeric copper(II) complex $[H_2LCu_2Cl_2(H_2O)_4]{\cdot}3H_2O$ (6), the distance between the two copper centers was calculated using field zero splitting parameter for the parallel component that was estimated from the ESR spectrum. The antibacterial and antifungal activities of the compounds showed that, some of metal complexes exhibited a greater inhibitory effect than standard drug as tetracycline (bacteria) and Amphotricene B (fungi).

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.3
• /
• pp.195-207
• /
• 2000

Organic and inorganic characteristics including bacterial cell number, enzyme activity, nutrients, and heavy metals have been monitored in twelve acrylic experimental tanks for two weeks to estimate and compare self-purification capacities in two Korean wet-land environments, tidal flat and rice field, which are possibly different with the environments in other countries because of their own climatic conditions. FW tanks, filled with rice field soils and fresh water, consist of FW1&2 (with paddy), FW3&4 (without paddy), and FW5&6 (newly reclaimed, without paddy). SW tanks, filled with tidal flat sediments and salt water, are SW1&2 (with anoxic silty mud), SW3&4 (anoxic mud), and SW5&6 (suboxic mud). Contaminated solution, which is formulated with the salts of Cu, Cd, As, Cr, Pb, Hg, and glucose+glutamic acid, was spiked into the supernatent waters in the tanks. Nitrate concentrations in supernatent waters as well as bacterial cell numbers and enzyme activities of soils in the FW tanks (except FW5&6) are clearly higher than those in the SW tanks. Phosphate concentrations in the SW1 tank increase highly with time compared to those in the other SW tanks. Removal rates of Cu, Cd, and As in supematent waters of the FW5&6 tanks are most slow in the FW tanks, while the rates in SW1&2 are most fast in the SW tanks. The rate for Pb in the SW1&2 tanks is most fast in the SW tanks, and the rate for Hg in the FW5&6 tanks is most slow in the FW tanks. Cr concentrations decrease generally with time in the FW tanks. In the SW tanks, however, the Cr concentrations decrease rapidly at first, then increase, and then remain nearly constant. These results imply that labile organic materials are depleted in the FW5&6 tanks compared to the FW1&2 and FW3&4 tanks. Removal of Cu, Cd, As from the supernatent waters as well as slow removal rates of the elements (including Hg) are likely due to the combining of the elements with organic ligands on the suspended particles and subsequent removal to the bottom sediments. Fast removal rates of the metal ions (Cu, Cd, As) and rapid increase of phosphate concentrations in the SW1&2 tanks are possibly due to the relatively porous anoxic sediments in the SW1&2 tanks compared to those in the SW3&4 tanks, efficient supply of phosphate and hydrogen sulfide ions in pore wates to the upper water body, complexing of the metal ions with the sulfide ions, and subsequent removal to the bottom sediments. Organic materials on the particles and sulfide ions from the pore waters are the major factors constraining the behaviors of organic/inorganic elements in the supernatent waters of the experimental tanks. This study needs more consideration on more diverse organic and inorganic elements and experimental conditions such as tidal action, temperature variation, activities of benthic animals, etc.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.1
• /
• pp.61-67
• /
• 2002

Sawdust, peat, and sawdust+peat were used as bulking agent in the compost production process using three different origin of manure; cow, pig, and chicken. The organic content and individual N, P, K content of the final manure compost were higher when peat or peat+sawdust were used to control the moisture. The carbon to nitrogen ratio and moisture content were low when peat or peat+sawdust were employed. In the case of cow and pig manure compost produced with peat or peat+sawdust, beneficial microorganism content was also higher than that of the manure samples produced with sawdust only. These results indicate that peat can be a useful component in the production of high quality manure compost.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.12
• /
• pp.1873-1879
• /
• 2010

This study was conducted to estimate the heavy metal contents of vegetables available on the markets in Seoul area. Concentrations of mercury (Hg), lead (Pb), cadmium (Cd), arsenic (As), chrome (Cr), nickel (Ni), copper (Cu), and zinc (Zn) were measured in 300 samples using a mercury analyzer and inductively coupled plasma optical emission spectrometer (ICP-OES) after wet digestion. The average values of heavy metals in vegetables were as follows [mean (minimum~maximum), mg/kg]; Hg: 0.0005 (N.D~0.007), Pb: 0.011 (N.D~0.259), Cd: 0.012 (N.D~0.188), As: 0.002 (N.D~0.142), Cr: 0.100 (0.019~0.954), Ni: 0.093 (0.003~1.231), Cu: 1.098 (0.072~36.29), and Zn: 3.48 (0.485~21.31). The heavy metal contents of vegetables available on the markets in Seoul were almost the same as or lower than those reported in other studies. The weekly average intakes of mercury, lead and cadmium from vegetables take 0.44~7.71% of PTWI (Provisional Tolerable Weekly Intakes) that the FAO/WHO Joint Food Additive and Contaminants Committee sets for evaluation of food safety.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.171-171
• /
• 2013

2층 FCCL (연성회로기판, Flexible Copper Clad Laminate)에 있어서 폴리이미드 필름과 구리의 접착력을 향상 시키기 위해 기존에 사용되고 있는 Ni-Cr대신 박리강도가 높고 에칭성도 매우 뛰어난 Ni-Mo-Nb 박막을 Roll-to roll 스퍼터 장비를 이용하여 개발하였다. 새롭게 개발된 Ni-Mo-Nb 박막은 기존 연구되어진 Ni-Cr 물질 대비 고온 박리강도 약 1.5~2.0배, 에칭성 8배 이상의 매우 우수한 특성을 보였다. Ni-Mo-Nb 접착층의 두께가 7~40 nm로 증가함에 따라 상온 박리강도가 향상 되는 것을 확인하였다. Ni-Mo-Nb 박막을 증착 하기 전 폴리이미드 기판표면을 RF 플라즈마 전처리 하였을 때 0.67 kg f/cm의 우수한 상온 박리강도를 나타내었으며 FCCL 샘플을 $150^{\circ}C$에서 168시간동안 열처리 한 후 접착력을 측정하였을 때도 0.54 kg f/cm의 높은 고온 박리강도를 보였다. FCCL의 박리강도, 표면 거칠기, 원소들의 화학적 결합, 박막의 미세구조를 peel test, atomic force microscopy, X-ray photoelectron spectroscopy, transmission electron microscopy를 이용하여 폴리이미드 기판 플라즈마 전처리 효과를 확인하였다. 그 결과 플라즈마 전처리를 한 폴리이미드 기판의 경우 처리하지 않은 기판보다 상온과 고온에서 더 우수한 접착력을 가지는 것을 확인 할 수 있었는데 이것은 폴리이미드 기판의 표면 거칠기 증가에 의한 mechanical interlocking effect가 아닌 전처리를 통한 폴리이미드 표면 개질로 C-0, C-N와 같은 chemical functional group이 증가했기 때문인 것으로 확인되었다.