• 한국표면공학회지
• /
• 제32권1호
• /
• pp.49-60
• /
• 1999

The protective oxide scales and coatings formed on high temperature materials must be preserved in high temperature atmosphere. And the thermal stresses induced by thermal cycling and the growth stresses by the formation of oxide scales can cause the loss of adherence and spalling of the oxide scales and coated layers. Among the coating processes Al diffusion coating is favored due to thermochemical stability and superior adherence in an hostile atmosphere. In this study, protective oxide forming element, Al was coated on Ni, Inconel 600 and 690 by diffusion coating process varying coating temperature and time. And the surface stability and adherence of oxide scales formed on those Al diffusion coated materials were evaluated by thermal cycling test. Al diffusion coated specimens showed superior cyclic oxidation resistance compared to bare ones and specimens coated for longer period had better cyclic oxidation resistance, due to the abundant amount of Al in the coated layer. Meanwhile Al diffusion coated Inconel 600 and 690 showed improved cyclic oxidation resistance by the effect of Al in the coated layer and Cr in the substrate. Comparing both Al diffusion coated Inconel 600 and 690, Al diffusion coated Inconel 690 maintained better adhesion between coated layer and substrate by virtue of the bridging effect resulting from the segregation of Cr in the interdiffusion zone.

• 대한금속재료학회지
• /
• 제49권9호
• /
• pp.699-707
• /
• 2011

P122 steel, with a composition of Fe-10.57%Cr-1.79%W-0.96Cu-0.59Mn was arc-welded and oxidized between $600^{\circ}C$ and $800^{\circ}C$ in air for up to 6 months. The oxidation rates increased in the order of the base metal, weld metal, and heat-affected zone (HAZ), depending on the microstructure. The scale morphologies of the base metal, weld metal, and HAZ were similar because it was determined mainly by the alloy chemistry. The scale consisted primarily of a thin $Fe_2O_3$ layer at $600^{\circ}C$ and $700^{\circ}C$ and an outer $Fe_2O_3$ layer and an inner ($Fe_2O_3$, $FeCr_2O_4$)-mixed layer at $800^{\circ}C$. The microstructural changes resulting from heating between $600^{\circ}C$ and $800^{\circ}C$ coarsened the carbide precipitates, secondary Laves phases, and subgrain boundaries in the matrix, resulting in softening of the base metal, weld metal, and HAZ.

• 한국광물학회지
• /
• 제16권3호
• /
• pp.223-232
• /
• 2003

리튬2차전지용 양극소재 개발을 위해 Li[L $i_{x}$M $n_{1-x-y}$C $r_{y}$ ] $O_2$를 공침법(co-p.ecipitation method)을 적용하여 각각 $650^{\circ}C$(CR650)와 8$50^{\circ}C$(CR850)에서 합성하였다. 리트벨트 구조분석 결과 계산의 정밀도를 나타내는 R 지수값을 보면 $R_{exp}$에 대한 $R_{wp}$값( $R_{wp}$/ $R_{exp}$)은 CR650과 CR850의 각각에 대해 19.2%/10.1%과 15.9%/9.76%를 보여주며, $R_{b}$값은 각각 10.9%와 8.54%, 그리고 S(GofF)값은 각각 1.9와 1.6으로 계산되었다. 합성된 양극소재는 공간군 R3m의 층상구조(LiMn $O_2$)가 존재하였으며, 전이금속 층 내의 Mn이 Li로 치환되면서(Li[L $i_{1}$3/M $n_{2}$3/] $O_2$) 단사구조(C2/c)의 거대격자(Superlattice) 구조현상도 관찰되었다. 계산된 단위포는 공간군 R3m, CR650이 a=2.8520(2)$\AA$, c=14.248(2)$\AA$, V=100.40(1)$\AA^3$이며, CR850은 a=2.8504(1)$\AA$, c=14.2371(7)$\AA$, V=100.179(8)$\AA^3$으로 각각 계산되었다. 또한 최종 결정된 화학식은 CR650은 Li[L $i_{0.35}$M $n_{0.56}$C $r_{0.09}$] $O_2$, CR850은 Li[L $i_{0.27}$M $n_{0.61}$C $r_{0.13}$] $O_2$으로 각각 구해졌다.다...다..구해졌다.다...다..

• 한국통신학회논문지
• /
• 제33권4A호
• /
• pp.377-386
• /
• 2008

본 논문에서는 IPv6기반 와이브로(WiBro) 시스템에서 핸드오버 지연을 최소화하고, 핸드오버 시 패킷손실이 없는 빠른 이동성제공방안을 제안한다. 이동검출과정에서의 처리지연을 줄이기 위해 링크계층에서 감지한 트리거 정보를 기반으로 링크계층(L2)의 핸드오버와 네트워크 계층(L3)의 핸드오버 처리과정을 결합시켜 단말과 네트워크간의 핸드오버 메시지교환 절차를 단순화하는 방안을 제안한다. 새로운 임시주소 생성과정에서 처리지연을 줄이기 위해 주소생성, 분배 및 관리를 새로운 네트워크 쪽에서 제어하는 방안을 제안한다. 또한, 패킷 전달지연의 최소화 및 패킷손실을 없애기 위해 PACR와 NACR를 연결하는 차 상위계층의 크로스오버 라우터(CR) 개념을 도입하고, CR에 패킷버퍼기능을 제안한다. 시뮬레이션 결과는 본 논문에서 제안한 방안이 셀 중첩반경이 좁고 단말의 이동속도가 빠른 핸드오버 환경에서도 기존 방식에 비해 처리지연이 최소화되고 패킷 손실이 없음을 보여준다.

• 한국재료학회지
• /
• 제28권7호
• /
• pp.423-427
• /
• 2018

For diamond/metal composites it is better to use diamond particles coated with metal carbide because of improved wettability between the diamond particles and the matrix. In this study, the coating of diamond particles with a chromium carbide layer is investigated. On heating diamond and chromium powders at $800{\sim}900^{\circ}C$ in molten salts of LiCl, KCl, $CaCl_2$, the diamond particles are coated with $Cr_7C_3$. The surfaces of the diamond powders are analyzed using X-ray diffraction and scanning electron microscopy. The average thickness of the $Cr_7C_3$ coating layers is calculated from the result of the particle size analysis. By using the molten salt method, the $Cr_7C_3$ coating layer is uniformly formed on the diamond particles at a relatively low temperature at which the graphitization of the diamond particles is avoided. Treatment temperatures are lower than those in the previously proposed methods. The coated layer is thickened with an increase in heating temperature up to $900^{\circ}C$. The coating reaction of the diamond particles with chromium carbide is much more rapid in $LiCl-KCl-CaCl_2$ molten salts than with the molten salts of $KCl-CaCl_2$.

• Corrosion Science and Technology
• /
• 제7권3호
• /
• pp.139-144
• /
• 2008

The results of microstructure observations of the $Al_2O_3$ scale formed on a Fe-Cr-Al steel during high temperature oxidation in the $SO_2$ atmosphere are presented. Morphology of the scale has been studied by SEM and TEM techniques. Phase and chemical compositions have been studied by EDX and XRD techniques. The alumina oxide is a primary component of the scale. TEM observations showed that the scale was multilayer. The entire surface of the scale is covered with "whiskers", which look like very thin platelets and have random orientation. The cross section of a sample shows, that the "whiskers" are approximately $2{\mu}m$ high, however the compact scale layer on which they reside is $0.2{\mu}m$ thick. The scale layer was composed mainly of small equiaxial grains and a residual amount of small columnar grains. EDX analysis of the scale surface showed that the any sulfides were found in the formed outer and thin inner scale layer. A phase analysis of the scale formed revealed that it is composed mainly of the $\theta-Al_2O_3$ phase and a residual amount of $\alpha-Al_2O_3$.

• 센서학회지
• /
• 제15권2호
• /
• pp.90-96
• /
• 2006

We have fabricated the Pd-blck/NiCr gate MISFET-type $H_2$ sensor to detect the hydrogen in atmosphere. A differential pair-type structure was used to minimize the intrinsic voltage drift of the MISFET. The Pd-black film was deposited in the argon environment by thermal evaporation. In order to eliminate the blister formation in the surface of the hydrogen sensing gate metal, Pd-black/NiCr double metal layer was deposited on the gate insulator. The scanning electron microscopy and the auger electron spectroscopy was used to analyze their surface morphology and basic structure. The Pd-black/NiCr gate MISFET has been shown high sensitivity and stability more than Pd-planar/NiCr gate MISFET.

• 대한화학회지
• /
• 제26권5호
• /
• pp.282-290
• /
• 1982

Montmorillonite가 주성분인 산성백토로부터 여러 양이온을 교환시켜 촉매를 제조하여 ethylene의 중합활성에 대하여 연구하였다. $Ni^{2+}$-Mont촉매상에서는 ethylene이 선택적으로 n-butene으로 이량화 되었으며, 그 활성은 150$^{\circ}$C 의 진공온도에서 최고로 나타났다. 그리고 촉매활성의 변화는 촉매의 산도와 밀접한 관계가 있었다. $Ni^{2+}$-Mont 촉매는 ethylene의 중합에 높은 활성을 나타내었으며, 그 활성은 450$^{\circ}C$의 진공온도에서 최고로 나타났다. 그리고 $Cr^{3+}$-Mont의 활성점은 $Cr^{3+}$이온으로 생각되었다.

• 열처리공학회지
• /
• 제11권3호
• /
• pp.186-191
• /
• 1998

An oxidation behavior of 304 and 316 stainless steels were studied in dry air. After solution treatment, specimens were polished up to $1{\mu}m$ $A1_2O_3$ grade and then subjected to oxidation treatment in dry air at $800^{\circ}C{\sim}1200^{\circ}C$. The oxidation behavior between matrix and oxide scale was analyzed with SEM, EDS and XRD. When oxidation treatment was conducted at $1200^{\circ}C$, large thickness of Fe oxide scale was formed on top of surface and fine $(Cr,Fe)_2O_3$ oxide film was formed below it. Cr rich zone existed at interface between metal and $(Cr,Fe)_2O_3$ oxide layer, and it was believed that this zone acted as obstacle to oxidation. Most of Ni was detected at the interface between metal and $(Cr,Fe)_2O_3$ and also detected at the interface between $Fe_2O_3$ and $(Cr,Fe)_2O_3$.

• 한국재료학회지
• /
• 제27권3호
• /
• pp.155-160
• /
• 2017

Doped-$LaCrO_3$ perovskites, because of their good electrical conductivity and thermal stability in oxidizing and/or reducing environments, are used in high temperature solid oxide fuel cells as a gas-tight and electrically conductive interconnection layer. In this study, perovskite $(La_{0.8}Ca_{0.2})(Cr_{0.9}Co_{0.1})O_3$ (LCCC) coatings manufactured by atmospheric plasma spraying followed by heat treatment at $1200^{\circ}C$ have been investigated in terms of microstructural defects, gas tightness and electrical conductivity. The plasma-sprayed LCCC coating formed an inhomogeneous layered structure after the successive deposition of fully-melted liquid droplets and/or partially-melted droplets. Micro-sized defects including unfilled pores, intersplat pores and micro-cracks in the plasma-sprayed LCCC coating were connected together and allowed substantial amounts gas to pass through the coating. Subsequent heat treatment at $1200^{\circ}C$ formed a homogeneous granule microstructure with a small number of isolated pores, providing a substantial improvement in the gas-tightness of the LCCC coating. The electrical conductivity of the LCCC coating was consequently enhanced due to the complete elimination of inter-splat pores and micro-cracks, and reached 53 S/cm at $900^{\circ}C$.