• Asian-Australasian Journal of Animal Sciences
• /
• 제21권6호
• /
• pp.853-860
• /
• 2008

This experiment was conducted to study the effects of chromium (Cr), dietary crude protein (CP) level and potential interactions between these two factors on growth rate and carcass response, insulin activity and lipid metabolism in lambs. Forty-eight, 9-week-old weaned lambs (Dorper$\times$Small-tail Han sheep, mean initial body weight = $22.96kg{\pm}2.60kg$) were used in a $2{\times}3$ factorial arrangement of supplemental Cr (0 ppb, Cr0; 400 ppb, Cr1; or 800 ppb, Cr2 from chromium yeast) and CP levels (157 g/d to 171 g/d for each animal, LP; or 189 g/d to 209 g/d for each animal, HP). Growth data and blood samples were collected at the beginning and end of the feed trial, after which the lambs were killed. Both Cr additive groups and the HP group increased final weight and average daily gain, especially the Cr1 and HP group (p<0.01). HP increased pelvic fat weight (p<0.05), fat thickness of the 10th rib (p<0.05), longissimus muscle area (p<0.01) and rate of deposition of intramuscular fat (p<0.01). Supplemental Cr decreased the rate of deposition of intramuscular fat (p<0.05). Fasting insulin level and the ratio of insulin to glucose were lower with Cr1 than other groups, but with no significant difference. Glucose concentration was not affected by any treatment. Nonesterified fatty acids increased in the Cr1 (p<0.05) and HP (p<0.05) conditions and there was a significant $Cr{\times}CP$ interaction (p<0.05). Cr1 decreased triglycerides (p<0.05) and total cholesterol (p = 0.151) and HP increased high-density lipoprotein cholesterol (p<0.05). Cr1 decreased lipoprotein lipase activity in subcutaneous adipose tissue (aLPL, p<0.05) and the ratio of aLPL to lipoprotein lipase activity in skeletal muscle (mLPL, p = 0.079). mLPL and hepatic lipase (hHL) were not affected by any treatment. In the present study, Cr had limited effects on growth rate and carcass response, whereas Cr and CP had some notable effects on plasma metabolites and enzyme activities. Cr has a potential effect on energy modulation between lipid and muscle tissue. In addition, few $Cr{\times}CP$ interactions were observed.

• 한국환경보건학회지
• /
• 제16권2호
• /
• pp.83-87
• /
• 1990

This study was carried out to investigate the pollution of heavy metals in soil of seven stations from the upper spot (Yeungchun Dam) of Kumho River to the downstream(Gangchang Bridge). The results obtained were as follows: 1. The content of heavy metals in soil of Kumho River basin was highest at Gangchang Bridge [expresed in $\mu$g/g : Mn(246.0), Cd(1.90), Fe(551.2), Cu(108.2), Zn(86.4), Cr(80.2), respectively]. Whereas, the content of heavy metals expect for Mn, Cu was lowest at Yeungchun Dam [Cd(0.40), Fe(548.0), Zn(30.7), Cr(6.2), respectively] Also, the content of Cr, Zn was increased when the sampling areas are changed from upstream to downstream except for Hayang Bridge, and Hayang Bridge was the diverging point of the heavy metals content. 2. There were relatively correlated between Mn : FE, Cu, Zn, Cr, Fe : Cu, Zn, Cr(0.40 < $\left$\mid${r}\right$\mid$$ < 0.70), and were high correlated between Cd : Mn, Fe, Cu, Zn, Cu : Zn, Zn : Cr(0.70 < $\left$\mid${r}\right$\mid$$ < 0.90). Particularly, there was higest correlated between Cd : Cr, Cu : Cr(0.90< $\left$\mid${r}\right$\mid$$ < 1.0)

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권9호
• /
• pp.2323-2340
• /
• 2012

Recent advances in cognitive radio technology have drawn immense attention to higher layer protocols above medium access control, such as transmission control protocol (TCP). Most proposals to improve the TCP performance in cognitive radio (CR) networks have assumed that either all nodes are in CR networks or the TCP sender side is in CR links. In those proposals, lower layer information such as the CR link status could be easily exploited to adjust the congestion window and improve throughput. In this paper, we consider a TCP network in which the TCP sender is located remotely over the Internet while the TCP receiver is connected by a CR link. This topology is more realistic than the earlier proposals, but the lower layer information cannot be exploited. Under this assumption, we propose an enhanced TCP protocol for CR networks called TCP for cognitive radio (TCP-CR) to improve the existing TCP by (1) detection of primary user (PU) interference by a remote sender without support from lower layers, (2) delayed congestion control (DCC) based on PU detection when the retransmission timeout (RTO) expires, and (3) exploitation of two separate scales of the congestion window adapted for PU activity. Performance evaluation demonstrated that the proposed TCP-CR achieves up to 255% improvement of the end-to-end throughput. Furthermore, we verified that the proposed TCP does not deteriorate the fairness of existing TCP flows and does not cause congestions.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2013년도 춘계학술대회 논문집
• /
• pp.112-113
• /
• 2013

Thin CrAlMgSiN films, whose composition were 30.6Cr-11.1Al-7.3Mg-1.2Si-49.8N (at.%), were deposited on steel substrates in a cathodic arc plasma deposition system. They consisted of alternating crystalline Cr-N and AlMgSiN nanolayers. After oxidation at $800^{\circ}C$ for 200 h in air, a thin oxide layer formed by outward diffusion of Cr, Mg, Al, Fe, and N, and inward diffusion of O ions. Silicon ions were relatively immobile at $800^{\circ}C$. After oxidation at $900^{\circ}C$ for 10 h in air, a thin $Cr_2O_3$ layer containing dissolved ions of Al, Mg, Si, and Fe formed. Silicon ions became mobile at $900^{\circ}C$. After oxidation at $900^{\circ}C$ for 50 h in air, a thin $SiO_2-rich$ layer formed underneath the thin $Cr_2O_3$ layer. The film displayed good oxidation resistance. The main factor that decreased the oxidation resistance of the film was the outward diffusion and subsequent oxidation of Fe at the sample surface, particularly along the coated sample edge.

• 한국환경보건학회지
• /
• 제28권1호
• /
• pp.41-49
• /
• 2002

Recently, pilot studies showed an evidence of reduction of airborne hexavalent chromium, Cr(VI), on PVC filter during air sampling and storage. However, the information on this in the field was limited. Thus, we studied the reduction behaviors of airborne Cr(VI) on PVC filters during sampling and storage at three field electroplating operations. Regression between sampling time and the reduction (ratio of Cr(VI) to total Cr concentrations) was not statistically significant (p>0.05). However, the reductions in samples collected for 240 ～ 340 minutes were significantly higher than those for 30 - 60 minutes. On the other hand, another experiment showed a good correlation (r=0.96) between sampling time and the reduction without an exceptional value. Storage temperature was not a factor affecting the reduction of Cr(VI) collected on PVC filter. The loss of Cr(VI) samples stored in alkali solution (2% NaOH/3% Na$_2$CO$_3$) was significantly lower than that stored in vial according to NIOSH method (p<0.05). Thus, dipping Cr(VI) samples into alkali solution was a storage method to minimize tile reduction.

• Corrosion Science and Technology
• /
• 제2권2호
• /
• pp.75-81
• /
• 2003

Chromium, molybdenum. and nitrogen are very important alloying elements in stainless steels and its effect was approved in pitting resistance equivalent (PRE) equations and many experimental results. However, Cr can improve the corrosion resistance, but facilitate the formation of sigma phase. Also. Mo has the same effect in stainless steels. If Cr and Mo are added at high amount to increase the corrosion resistance of stainless steel, corrosion resistance in annealed alloys can be improved, but in case of welding or aging heat treatment. its resistance will be drastically decreased. In this work, increasing Cr and N contents but decreasing Mo than the commercial alloys made the experimental alloys. Typical alloys are 25Cr-4.5Mo-0.43N alloy, 27Cr-4.7Mo-0.4N alloy, 27Cr-5.3Mo-0.25N alloy, 32Cr-2.6Mo-0.36N alloy. After annealing and aging heat treatment, microstructures, anodic polarization test, and pitting corrosion test were performed. Annealed alloys showed $100^{\circ}C$ of CPT and aged alloys showed the different tendency depending upon Cr and Mo contents(SFI)

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2008년도 추계학술대회 초록집
• /
• pp.153-154
• /
• 2008

High velocity oxy-fuel (HVOF) thermal spraying coating has been used widely throughout the last 60 years mainly in defense, aerospace, and power plants. Recently this coating technique is considered as a promising candidate for the replacement of the traditional electrolytic hard chrome plating (EHC) which pollutes the environment and causes lung cancer by toxic hexa-valent $Cr^{6+}$. In this study, two kinds of cermet coatings, WC-CoCr and WC-CrC-Ni, are formed by HVOF spraying. The wear properties of coatings are evaluated comparatively by reciprocating sliding wear tests at $25^{\circ}C$, $250^{\circ}C$ and $450^{\circ}C$ respectively. Wear rates show that WC-CoCr coatings have better sliding wear resistance than WC-CrC-Ni coatings regardless of temperature due to more, compact and homogeneously distributed WC particles, less metal content, Co, Cr rich metallic bindermatrix with higher fracture strength and better adhesive strength with WC particles.

• 한국재료학회지
• /
• 제17권5호
• /
• pp.268-272
• /
• 2007

Inconel 617 is a candidate tube material for high temperature gas-cooled reactors(HTGR). The microstructure and mechanical properties of Inconel 617 were studied after exposure at high temperature($1050^{\circ}C$). The dominant oxide layer was Cr-oxide. The internal oxide and Cr-depleted region were observed below the Cr-oxide layer. The depth of Cr-depleted zone and internal oxide increased with exposure time. The major phases of carbides are $M_{23}C_6\;and\;M_6C$. The composition of $M_{23}C_6\;and\;M_6C$ were determined to be Cr-rich and Mo-rich, respectively. $M_6C$ carbide is more stable than $M_{23}C_6$ at high temperature. From the results of high temperature compression test, there were no significant changes in hardness and yield strength upon increasing exposure time.

• Journal of Acupuncture Research
• /
• 제26권6호
• /
• pp.91-100
• /
• 2009

Objectives : The objective of this study is to investigate Anti-nociceptive and anti-inflammatory effects of Clematidis Radix (CR) herbal-acupuncture on the test rats with induced acute pain. Methods : The effects of Clematidis Radix (CR)-distillates were investigated in three types of models with three different pain. Highly purified distillate of CR called CR herbal-acupuncture was injected to Zusanli ($ST_{36}$) acupoint. In the tail flick test, the CR herbal-acupuncture treatment did not show a significant effect of relieving acute pain. To investigate the anti-inflammatory effect of CR herbal-acupuncture, the second testing model'pain was induced by injecting formalin to its planter. For the last model, carrageenan was injected into tarsal joint. the medicinal effect of CR herbal-acupuncture was evaluated through the behavioral analyses such as licking time, weight distribution ratio and ankle circumference. Results : In the formalin test, the analgesic effect of CR herbal-acupuncture was more pronounced in the late phase (for 20 min after the early phase) than in the early phase (for the first 10 min post formalin injection). It was proven by weight distribution ratio testing and ankle edema testing that herbal-acupuncture of CR inhibited arthritis caused by the carrageenan. Conclusions : These results revealed that CR herbal-acupuncture was effective to alleviate the inflammatory pain and could be used as an analgesic treatment with an anti-inflammatory effect.

• 한국환경과학회지
• /
• 제21권3호
• /
• pp.369-375
• /
• 2012

We investigated usefulness of chicken feather as bioadsorbent for removal of hexavalent chromium[Cr(VI)] and oil from aqueous solution. Chicken feather was chemically treated with DTPA, EDTA, NaOH and SDS, respectively. Among them, EDTA was the most effective in adsorbing Cr(VI). Cr(VI) uptake by chicken feather was increased with decreasing pH; the highest Cr(VI) uptake was observed at pH 2.0. By increasing Cr(VI) concentration, Cr(VI) uptake was increased, and maximum Cr(VI) uptake was 0.34 mmol/g. Cr(VI) adsorption by chicken feather was well described by Freundlich isotherm than Langmuir isotherm and Freundlich constant(1/n) was 0.476. As the concentration of chicken feather was increased, Cr (VI) removal efficiency was increased but Cr(VI) uptake was decreased. Most of Cr(VI) was adsorbed at early reaction stage(1 h) and adsorption equilibrium was established at 5 h. On the other hand, chicken feather adsorbed effectively oils including bunker-A and bunker-C. In conclusion, our results suggest that chicken feather waste could be used to remove heavy metal and oil; it is a potential candidate for biosorption material.