• 한국화재소방학회논문지
• /
• 제25권6호
• /
• pp.64-72
• /
• 2011

기존의 무량판 구조와 동일한 콘크리트 중공슬래브구조는 구조적 하중지지 성능이 불필요한 슬래브 단면상의 중앙부 콘크리트를 제거하여 슬래브의 자중을 줄이고 무량판 구조의 단점을 보완하여 장점을 극대화시킨 구조형식이다. 본 연구에서는 콘크리트 중공슬래브 공법의 실제 스팬길이인 7.5 m에서 슬래브 피복두께에 따른 화재거동 영향성 분석을 위하여 화재실험을 수행하였다. 하중조건은 고정하중과 적재하중을 고려하여 실험체에 등분포 조건으로 사전 재하하였으며, 표준화재조건으로 재하가열 실험을 수행하였다. 슬래브의 화재가열 노출면으로부터의 깊이별 온도변화와 처짐변형 특성을 측정하였으며, KS F 2257-1 평가기준에 의거하여 슬래브의 내화성능을 평가하였다. 실험결과 피복두께 50 mm를 확보할 경우, EPS 중공체로 제작한 실험체의 경우 약 2시간 정도의 내화성능을 확보할 수 있는 것으로 나타났다.

• Archives of Reconstructive Microsurgery
• /
• 제14권2호
• /
• pp.117-124
• /
• 2005

Purpose: To present our experience and design modification of an anterolateral thigh flap in soft tissue reconstruction. Materials and Methods: Between April of 2004 and May of 2005, 26 anterolateral thigh flaps were used in 26 patients. There were 22 males and 4 females between 23 and 60 years (mean, 40years). The mean follow-up period was 11($4{\sim}18$) months. All cases were a cutaneous flap. Twenty-two were musculocutaneous perforator flaps(85%) and 4 were septocutaneous perforator flaps(15%). Four flaps were used as a sensate flap. While the donor sites were closed directly in 14 cases(54%), 12 cases(46%) underwent skin grafting of the donor site. During the flap design, a triangular skin design was added to a vascular anastomosis site in 14(54%) patients and used as a roof of the tunnel. The healing period of the skin graft between those performed above the fascia and above the muscle were compared. Results: The average size of the flaps was $16{\times}9(11-20{\times}7-12)\;cm$. The overall flap success rate was 96%. Complications encountered were infection in 4 cases, and marginal skin necrosis in 1 case. The healing period was delayed with the infection in 3 of the 6 cases involving a skin graft over the fascia. All 14 cases with the triangular skin design survived, but there was 1 flap failure and 1 marginal necrosis in 12 cases without a triangular skin design. Conclusions: It may be better to undergo a skin graft above the muscle than above the fascia in covering a donor site defect, and to use a triangular skin design in order to prevent vascular insufficiency. An anterolateral thigh flap is a versatile flap for a soft tissue reconstruction because its thickness and volume can be adjusted to the extent of the defect with minimal donor site morbidity.

• Archives of Reconstructive Microsurgery
• /
• 제19권2호
• /
• pp.108-111
• /
• 2010

Purpose: In reconstructing a defect on the dorsum of the hand, there are many cases of extensor tendons exposed or even missing. The repaired or reconstructed tendons need relevant gliding environment for good functional recovery. The anterolateral thigh flap offers a vascular fascial component with large amounts that can be used for covering exposed tendons and we report a unique case of single-stage hand dorsum and gliding surface reconstruction. Methods: A 35-year-old man had severe post-traumatic scarring in his left dorsal hand and coverage of the flap with split-thickness skin graft has been done before. After scarred skin excision and extensor tendon graft for missed part, a free anterolateral thigh adipofascial flap was used to resurface the hand dorsum and to reconstruct a two-layer gliding surface of the extensor tendons. The extensor tendons were wrapped in the fascial component with the fat layer inside. Results: He had an uneventful postoperative course without infection, dehiscence and flap necrosis. Good overall functional recovery and tendon excursion were observed. He was also satisfied with postoperative appearance. Conclusion: A free anterolateral thigh adipofascial flap was used successfully for reconstruction of a two-layer tendon gliding surface to treat a patient with severe scarring in the dorsal hand.

• Earthquakes and Structures
• /
• 제17권2호
• /
• pp.233-244
• /
• 2019

In this work, we have studied the effects of different soil thicknesses, haunch heights, reinforcement forms and construction technologies on the seismic performance of a composite precast fabricated utility tunnel by pseudo-static tests. Five concrete specimens were designed and fabricated for low-cycle reciprocating load tests. The hysteretic behavior of composite precast fabricated utility tunnel under simulated seismic waves and the strain law of steel bars were analyzed. Test results showed that composite precast fabricated utility tunnel met the requirements of current codes and had good anti-seismic performance. The use of a closed integral arrangement of steel bars inside utility tunnel structure as well as diagonal reinforcement bars at its haunches improved the integrity of the whole structure and increased the bearing capacity of the structure by about 1.5%. Increasing the thickness of covering soil within a certain range was beneficial to the earthquake resistance of the structure, and the energy consumption was increased by 10%. Increasing haunch height within a certain range increased the bearing capacity of the structure by up to about 19% and energy consumption by up to 30%. The specimen with the lowest haunch height showed strong structural deformation with ductility coefficient of 4.93. It was found that the interfaces of haunches, post-casting self-compacting concrete, and prefabricated parts were the weak points of utility tunnel structures. Combining the failure phenomena of test structures with their related codes, we proposed improvement measures for construction technology, which could provide a reference for the construction and design of practical projects.

• Steel and Composite Structures
• /
• 제44권5호
• /
• pp.721-740
• /
• 2022

In this paper, an accurate kinematic model has been developed to study the mechanical response of functionally graded (FG) sandwich beams, mainly covering the bending, buckling and free vibration problems. The studied structure with homogeneous hardcore and softcore is considered to be simply supported in the edges. The present model uses a new refined shear deformation beam theory (RSDBT) in which the displacement field is improved over the other existing high-order shear deformation beam theories (HSDBTs). The present model provides good accuracy and considers a nonlinear transverse shear deformation shape function, since it is constructed with only two unknown variables as the Euler-Bernoulli beam theory but complies with the shear stress-free boundary conditions on the upper and lower surfaces of the beam without employing shear correction factors. The sandwich beams are composed of two FG skins and a homogeneous core wherein the material properties of the skins are assumed to vary gradually and continuously in the thickness direction according to the power-law distribution of volume fraction of the constituents. The governing equations are drawn by implementing Hamilton's principle and solved by means of the Navier's technique. Numerical computations in the non-dimensional terms of transverse displacement, stresses, critical buckling load and natural frequencies obtained by using the proposed model are compared with those predicted by other beam theories to confirm the performance of the proposed theory and to verify the accuracy of the kinematic model.

• 대한방사선치료학회지
• /
• 제20권1호
• /
• pp.37-43
• /
• 2008

목 적: 유방 보존 수술 후 방사선 치료를 받는 Large pendulous breast 환자에 있어서 엎드린 자세의 유용성을 평가해 보고자 한다. 대상 및 방법: 동일 환자에게 Breast board를 사용한 바로 누운 자세(Supine position: SP), Breast Supporting Device를 사용한 바로 누운 자세(Supine position with breast supporting device: SD), 그리고 Custom Prone mattress를 사용한 엎드린 자세 (Prone position: PP)를 모두 적용하였다. 각 방법에 대해 전산화단층촬영(High Advantage, GE Medical System, USA)을 시행하였고, 3차원 치료계획용 컴퓨터($Pinnacle^3$, Philips Medical System, USA)를 사용하여 세 방법에 대한 최적의 치료 계획을 세웠다. 평가를 위해 임상표적체적(CTV)과 조사되는 정상조직(동측 폐, 심장)의 용적(ILV, IHV)을 구하였고, 각 정상조직에 대해 Central Lung Distance (CLD)와 Maximum heart distance (MHD)를 측정하였다. 또한, 선량 체적 히스토그램(Dose-volume histogram, DVH)을 사용하여 CTV에서 $V_{95}$, $V_{100}$, $V_{105}$, $V_{110}$과 $D_{90}$, $D_{95}$를 비교하였고, 정상조직에 있어서 $D_5$와 $V_{20\;Gy}$ (동측 폐), $V_{18\;Gy}$ (심장)을 비교하였다. 결 과: SP와 SD에 비해 PP에서 ILV가 73.6%와 49.5%, IHV가 33.8%와 10.7%, CLD가 54.5%와 40.0%, 그리고 MHD에서 34.3% 와 20.7% 감소하였다. CTV의 선량 체적 히스토그램을 비교한 결과, SP에서 $V_{110}$이 0.2%인 것과 달리 PP에서 $V_{95}$가 96.2%, $V_{100}$이 61.5%, $V_{105}$가 1.2%, 그리고 $V_{110}$은 0%의 값을 나타내어 상대적으로 과다선량(hot spot) 영역 없이 Dose coverage가 우수함을 보여 주었다. 정상조직의 $D_5$는 동측 폐에 있어서 PP가 SP와 SD에 비해 57.6%와 52.2%, 심장에서는 13.9%와 11.4% 감소하였다. 또한, 동측 폐의 $V_{20\;Gy}$는 77.4%와 57.8%, 심장의 $V_{18\;Gy}$는 42.4%와 39.1% 감소하였다. 결 론: Large pendulous breast 환자의 방사선 치료 시, 엎드린 자세의 적용은 CTV의 선량 분포를 향상시키고, 동측 폐와 심장의 선량 감소를 가능케 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.278-278
• /
• 2009

A photovoltaic device consisting of arrays of radial p-n junction wires enables a decoupling of the requirements for light absorption and carrier extraction into orthogonal spatial directions. Each individual p-n junction wire in the cell is long in the direction of incident light, allowing for effective light absorption, but thin in orthogonal direction, allowing for effective carrier collection. To fabricate radial p-n junction solar cells, p or n-type vertical Si wire cores need to be produced. The majority of Si wires are produced by the vapor-liquid-solid (VLS) method. But contamination of the Si wires by metallic impurities such as Au, which is used for metal catalyst in the VLS technique, results in reduction of conversion efficiency of solar cells. To overcome impurity issue, top-down methods like noble metal catalytic etching is an excellent candidate. We used noble metal catalytic etching methods to make Si wire arrays. The used noble metal is two; Au and Pt. The method is noble metal deposition on photolithographycally defined Si surface by sputtering and then etching in various BOE and $H_2O_2$ solutions. The Si substrates were p-type ($10{\sim}20ohm{\cdot}cm$). The areas that noble metal was not deposited due to photo resist covering were not etched in noble metal catalytic etching. The Si wires of several tens of ${\mu}m$ in height were formed in uncovered areas by photo resist. The side surface of Si wires was very rough. When the distance of Si wires is longer than diameter of that Si nanowires are formed between Si wires. Theses Si nanowires can be removed by immersing the specimen in KOH solution. The optimum noble metal thickness exists for Si wires fabrication. The thicker or the thinner noble metal than the optimum thickness could not show well defined Si wire arrays. The solution composition observed in the highest etching rate was BOE(16.3ml)/$H_2O_2$(0.44M) in Au assisted chemical etching method. The morphology difference was compared between Au and Pt metal assisted chemical etching. The efficiencies of radial p-n junction solar Cells made of the Si wire arrays were also measured.

• Applied Microscopy
• /
• 제28권3호
• /
• pp.363-377
• /
• 1998

After the investigation on the eye of Incilaria fruhstorieri with light and electron microscopes, the following results were obtained. The eye of Incilaria fruhstorferi comprises cornea, lens, vitreous body, retina, and optic nerve inward from the outside. Cornea is composed of squamous, cuboid, columnar and irregular cells, which appear to be light due to their low electron density. In their cytoplasms, glycogen granules, multivesicular body, and nucleus were observed. Vitreous body, located behind non-cellular transparent lens, is filled with long and short microvilli protruding from the retinal epithelia. Retinal epithelium, the organ to perceive objects, is divided into four parts; microvillar layer pigment layer, nuclear layer, and neutrophils layer, from the apical portion. Microvillar layer consists of the type-I photoreceptor cells and pigmented granule cells. In the apical portion of their cytoplasms, long microvilli (length, $19{\mu}m$) , short microvilli (length, $8{\mu}m$), and rolled microvilli grow thick in the irregular and mixed forms. Photoreceptor cells are classified into type-I and type-II, according to their structures. The type-I cell has the apical portion rising roundly like a fan and the lower part which looks like the helve of a fan. In the cytoplasm of the apical portion, there are clear vesicles, cored vesicles, ovoid mitochondria, and microfilaments, and in the cytoplasm of the lower part, photic vesicles with their diameters about 60nm aggregate densely. The type-II photoreceptor cell, located at the lower end of the type-I cells, has a very large ovoid nucleus 3nd no microvilli. In the cytoplasm of the type-II cell, the photic vesicles with sizes 60nm aggregate more densely than in the cytoplasm of the type-I cell. Pigmented cells are classified into type-A and type-B, according to their structures. The type-A is identified to be a large cell containing round granules (diameter, $0.5{\mu}m$) of very high electron density, while the type-B is identified as a small cell where the irregular granules (diameter, $0.6{\mu}m$) of a little lower electron density amalgamate. Nuclear layer ranges from the bottom of pigment layer to the top of the capsule, and contains three kinds of nuclei (nuclei of the type-II photoreceptor cell, pigmented granule cell, and accessory neuron). The capsules covering the outmost part of the eyeball are composed of collagenous fiber and three longitudinal muscle layers (the thickness of each longitudinal muscle layer, $0.4{\mu}m$) and thick circular muscle layer (thickness, $0.3{\mu}m$). Around the capsules, there is a neurophile layer consisting of neurons and nerve fibers. Each neuron has a relatively large ovoid nucleus for its cytoplasm, and in the karyosome, large lumps of keterochromatin form a wheel nucleus.

• 한국환경복원기술학회지
• /
• 제11권1호
• /
• pp.23-32
• /
• 2008

In order to discern the development of technology in creating, properly managing, and characterizing the types used in facade greening, this article examines the instances of facade greening of Bulgaria, Greece and Turkey which is not only located in the latitude similar to South Korea's but also influenced by the both continental and oceanic climate. The study was carried out for 11 months from October 2002 to September 2003. The total 242 places were researched and they were 83 sites in Athens, 77 sites in Istanbul, and 82 sites in Sofia. Varieties, usage, configuration, foundation and characteristics of plants were studied. The goals of greening, and building's surface roughness and thickness, direction of the wall were also researched. The result of survey are as follows; 17 families and 33 species of climbing plants were found in Athens, Istanbul, and Sofia. Thickness of facade greening in the three cities is 46cm in Athens, 39cm in Istanbul, and 53cm in Sofia. The possible facade greening size per a climbing plant, Parthenocissus tricupidata takes up the largest portion of the wall in the three cities similarly followed by Vitis vinifera and Wistaria spp. By its diversity it can be assumed that these plants are most practical for large scale of facade greening and full covering. Evergreen climbing plants such as Hedera helix and Ficus niponica are useful plants for relatively large scale of facade greening area. In the facade greening types, the climbing type is the most dominant in the three cities and most of the climbing type was planted on the natural foundation but the hanging and combination types were planted on an artificial foundation located on the balcony or on the roof of the building. In the directions of the walls for facade greening, the west direction are most popular which is for the improvement of sun shading in summer season. In Sofia the apartments were most applied with facade greening but In Istanbul and Athens the residential buildings and the public buildings were adapted with facade greening actively as well as residential building. The purpose of lowering summer heat took up the highest portion followed by the purpose of ornamentation and maintaining privacy in all surveyed cities.

• 한국지반공학회논문집
• /
• 제22권5호
• /
• pp.83-91
• /
• 2006

최근 지구온난화현상으로 인해 발생하는 국지성 호우는 철도 연변사면 활동 및 활동 토체로 인한 선로매몰 그리고 선로유실 등의 불안정성을 초래하는 요인으로 대두되고 있다. 강우로 인한 사면의 거동에 대한 현장조사 결과 토층의 두께 및 사면의 형태적 특성 등에 따라 서로 다른 활동특성이 관측되었다. 이와 같은 활동특성을 천층 활동타입, 중간층 활동타입, 우곡부 활동타입, 암반 경계부 활동타입 4가지로 분류하였다. 이러한 관측과 관련하여 각 타입의 활동메커니즘을 규명하고 강우시 사면의 거동특성을 분석하고자 실내모형실험을 수행하였다. 실내모형실험은 미립분함량, 초기함수비, 경사각, 다짐에너지를 고정 변수로 취하고 토피고, 강우강도, 사면표면의 형태를 변화시키는 조건으로 수행되었다. 실내모형실험의 결과 천층 활동은 주로 표층에서 발생하며 침식에 의한 활동임을 알 수 있었다. 또한 초기 침식이 상대적으로 다른 활동타입에 비해서 늦게 발생하였으나 침식의 진행은 빨랐다. 우곡부 활동타입은 우곡부로 집수된 빗물로 인하여 침식 정도가 더 심하게 진행되었으며 사면내 위치하는 전석이 드러날 정도였다. 전석층까지 침식이 발생한후 전석의 존재로 인하여 추가적인 침식이 상대적으로 그 이전보다 느리게 발생하였다. 암반 경계부 활동타입의 경우 본 실험에서 가장 빨리 초기 활동 발생이 관측되었다. 각 활동타입에서 공통적으로 관측된 사항은 사면의 하단부에서 초기 변형이 관측되었으며 이러한 관측은 사면내 침투수의 사면방향의 흐름을 의미한다.