• 대한가정학회지
• /
• 제11권1호
• /
• pp.26-43
• /
• 1973

This study was carried out on the Sewbility of Urethane Foam usually used as coldproof lining. The Sewability was estimated with the Puckering Grade and Seam Efficiency according to the thicknes of urethane foam, fineness and material of sewing thread, and the sort of covering fabric. The result shows the following ; 1. The thick foam proportinally shows the low Puckering Grade. 2. Effect on the sewability is small in fineness of sewing thread but large in material. Especially silk thread shows the greatest sewability in foam sewing. When the material of covering fabric is same as that of sewing thread (for example ; p/c fabric and p/c thread) the sewability is excellent in special. 3. Taffeta in covering foam is not suitable to foam sewing, satin and twill show superior sewability without reagrd to the thickness of foam. 4. In case of sewing foam covered with tricot, optimum thickness of foam and fineness of sewing thread through pretest must determine. 5. The thicker foam is the better seam efficiency tends, and Seam Efficiency largely effects to the strength of the sewing thread itself. 6. The seam Efficiency can heighten with the strength of sewing thread in proportion to that of covering fabric.

• 환경영향평가
• /
• 제32권3호
• /
• pp.157-165
• /
• 2023

폐석탄광산 주변 농경지의 주요 토양오염물질은 비소이며, 폐금속광산과는 달리 그 오염수준이 관련 환경기준을 경미하게 초과하는 특성을 가진다. 이에 선행연구에서는 폐석탄광산 농경지의 토양개량·복원사업(안정화 처리 및 복토층 조성) 시 복토층 두께를 기존 40 cm에서 20 cm 두께로 낮추는 방안의 적용성을 실내 포트실험으로 확인한 바 있다. 금번 후속연구에서는 본 방안을 실제 농경지에서 벼 재배를 통해 실증하였다. 4개월이 넘는 벼 재배기간 중 쌀알로 전이된 비소의 농도는 20 cm 두께의 복토 시 44% 이상의 전이감소율을 보였다. 특히 오염된 원지반을 안정화 처리한 후 복토한 경우엔 이의 감소율이 56%까지 증가하였다. 따라서 본 실증연구를 통해 복토층 두께 20 cm의 적용성을 확인하였고, 이는 곧 복토재 사용량 감소로 인한 사업비 절감도 가능함을 시사한다.

• 한국화재소방학회논문지
• /
• 제24권4호
• /
• pp.41-46
• /
• 2010

고강도 콘크리트는 대형 사회기반 구조물로서 많이 활용되고 있다. 고강도 콘크리트는 우수한 재료적 성능과 내구성을 확보하고 있지만 반면에 화재에 대한 급작스러운 폭렬현상으로 인하여 구조적인 문제를 야기시키기도 한다. 따라서 본 연구에서는 콘크리트 피복두께에 추가하여 내화피복재를 사용함으로써 내화피복두께에 따른 콘크리트의 내화성능을 평가하고 최적의 내화피복두께를 산정하는 실험적 연구를 수행하였다. 내화피복재를 10mm 간격으로 증가시키면서 실험을 수행한 결과 콘크리트의 내화성능이 크게 향상됨을 볼 수 있었으며, 최적의 내화피복두께는 약 1~3mm로 산정되었다. 또한 폭렬에 의하여 급작스러운 콘크리트 내부의 온도상승 이후 기화열에 의한 열손실로 완만하게 온도가 상승되는 현상이 실험적으로 관측되었다. PP 섬유는 약 $200^{\circ}C$ 부근에서 용해되어 고온에서는 빈 채널만 남게 되므로 내부 증기압을 저감시켜주는 역할도 관측되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.41-42
• /
• 2023

The physical performance of high-strength concrete deteriorates when exposed to high temperatures such as fire. In particular, in the case of ultra-high-strength concrete, there is a high possibility of explosion due to internal water pressure and thermal expansion due to the tight internal structure. In this paper, a fire resistance certification test was conducted for field application of ultra-high-strength fire-resistant concrete, and the fire resistance performance (temperature rise of main rebar) was compared according to the structural concrete cover thickness. As a result, when the covering thickness was 40 mm, three structures did not meet the certification standards, and when the covering thickness was 50 mm, all structures met the fire resistance certification standards.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.5-8
• /
• 2006

High strength concrete has been increasingly used in high rue building and it is very obvious re consider fire resistance performance of that. Unlike the normal strength concrete, high strength concrete in sudden elevating temperature at fire is susceptible to spalling with severe explosion and surface split, due to high density of concrete. In order to endure the spalling, inner space temperature of concrete should be control less than certain point. Therefore this study investigated the influence of covering materials on high strength concrete finishing spray-on materials of fiber composite spray mortar(FCSM). Both polypropylene(PP) and polyvinyl alcohol(PVA) fiber were used in this test. Test showed that concrete, covering 18mm mortar containing PVA fiber and confining metal lath 2.3mm thickness, decreased 50% of main bar ambient temperature. compared with control concrete. In addition, concrete covering 18mm mortar without fiber caused falling of covering materials and then it was exposed in elevating temperature. As a result, spatting of the concrete occurred same as control concrete. However, concrete covering spray-on mortar containing PVA or PP fiber resisted spatting occurrence.

• Restorative Dentistry and Endodontics
• /
• 제43권4호
• /
• pp.48.1-48.13
• /
• 2018

Objectives: To analyze the influence of thickness and incisal extension of indirect veneers on the stress and strain generated in maxillary canine teeth. Materials and Methods: A 3-dimensional maxillary canine model was validated with an in vitro strain gauge and exported to computer-assisted engineering software. Materials were considered homogeneous, isotropic, and elastic. Each canine tooth was then subjected to a 0.3 and 0.8 mm reduction on the facial surface, in preparations with and without incisal covering, and restored with a lithium disilicate veneer. A 50 N load was applied at $45^{\circ}$ to the long axis of the tooth, on the incisal third of the palatal surface of the crown. Results: The results showed a mean of $218.16{\mu}strain$ of stress in the in vitro experiment, and $210.63{\mu}strain$ in finite element analysis (FEA). The stress concentration on prepared teeth was higher at the palatal root surface, with a mean value of 11.02 MPa and varying less than 3% between the preparation designs. The veneers concentrated higher stresses at the incisal third of the facial surface, with a mean of 3.88 MPa and a 40% increase in less-thick veneers. The incisal cover generated a new stress concentration area, with values over 48.18 MPa. Conclusions: The mathematical model for a maxillary canine tooth was validated using FEA. The thickness (0.3 or 0.8 mm) and the incisal covering showed no difference for the tooth structure. However, the incisal covering was harmful for the veneer, of which the greatest thickness was beneficial.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.226-226
• /
• 2017

This study was to evaluate methods to high quality food ramie rice cake, thereby increasing farm income. This study investigated the effects of different covering material on stable winter survival management with edible leaf in Ramie(Boehmeria nivea L.). The method of winter survival with covering material were conducted under three condition compose to Non covering, Rice straw cutting covered with 500kg.10a-1, Rice husks covered with 1,000kg.10a-1(covered 4~5 cm thickness in the soil surface). Method of application were standard application(N-P-K-Compost applied at 27-9-27-600kg.10a-1. Compost and fused phosphate applied at 100% of basal fertilizer in March 25. 20% of top dressing were four times application in March 25 - October 5. Planting year were March 15, 2011. Plants were spaced 60 cm apart in rows 25 cm apart with open cultivation. According to non covering < Rice husks covered with 1,000kg.10a-1 < Rice straw cutting covered with 500kg.10a-1 cultivation this order, aerial part as a result were plenty amount of growth. Sprout time and winter survival rates was uncovering control plot compared to 2 - 5 days quickly, 45-57% highly by rice husks and rice straw covering. Green leaf yields is untreated control plot (12,44 kg.10a-1) compared to rice husks covering 7% higher, and rice straw covering increased to 18% of the most.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.495-500
• /
• 2002

The purpose of this study is to develop and to apply this permanent cement mortar form as one of those system forms to improve existing form's problems. (1) In the fire proof test with combined specimen, the fire proof covering including form section thickness is satisfied with the fire proof criterion. It is considered that form section thickness has no problem (2) The suitable method of normal pressure steam curing for the form's mass production is 4 hours in 65℃ considering production cost, the silica fume admixture is economic.

• Bulletin of the Korean Chemical Society
• /
• 제26권6호
• /
• pp.966-970
• /
• 2005

To measure the thickness of liquid films from 10 to 60 ${\mu}m$, we used photochromic dye activation. And we used silicone oil with 10 centi-Stokes and commercial photochromic dyes. To make films with exact and known thicknesses, we used two glass wafers. A film formed between two wafers after placing a drop of liquid of known volume on one wafer and covering the other. The film thickness could be estimated from the diameter of wafer and the dropped liquid volume. To quantitatively evaluate the result, captured the images using digital camera then analyzed the images using the image tool. The gray scale intensity using the captured images of activated dye with these thicknesses showed the repeatability below ${\pm}$ 1.0% when measured with a silicone oil solution containing 0.1% SO and SO-ANTH dyes. And we showed that photochromic dye activation method could be used to measure our liquid film thickness ranges.

• 한국화재소방학회논문지
• /
• 제25권1호
• /
• pp.78-84
• /
• 2011

최근 콘크리트 내화 연구는 대부분 고강도 콘크리트의 내화성능 확보에 많은 초점이 맞추어져 있다. 그러나 국내의 콘크리트 수요를 살펴보면 40MPa 이하의 일반강도 콘크리트의 수요가 전체 콘크리트 수요량의 대부분을 차지한다. 따라서 고강도 콘크리트의 내화성능에 대한 연구뿐만 아니라 일반콘크리트의 내화성능에 관한 연구도 필요하다. 본 연구에서는 40MPa 콘크리트 기둥을 대상으로 콘크리트 피복 두께와 단면크기를 변수로하여 내화성능을 평가하였으며, 연구 결과 단면크기가 커질수록, 피복두께가 두꺼워질수록 내화성능은 향상되는 것으로 나타났다.