• Journal of Animal Science and Technology
• /
• v.64 no.3
• /
• pp.564-573
• /
• 2022

In this study, considering the difficulties for all farms to convert farm styles to animal welfare-based housing, an experiment was performed to observe the changes in the behavior and welfare of sows when the slat floor was changed to a collective breeding ground. Twenty-eight sows used in this study were between the second and fifth parities to minimize the influence of parity. Using a flats floor cover, the flattening rates were treated as 0%, 20%, 30%, 40%, and 50%. Data collection was the behavior of sows visually observed using a camera (e.g., standing, lying, fighting and excessive biting behaviors, and abnormal behaviors) and the animal welfare level measured through field visits. Lying behavior was found to be higher (p < 0.01) as the flattening rate increased, and sows lying on the slatted cover also increased as the flattening rate increased (p < 0.01). Fighting behavior wasincreased when the flattening rate was increased to 20%, and chewing behavior was increased (p < 0.05) as the flattening rate increased. The animal welfare level of sows, 'good feeding', it was found that all treatment groups for body condition score and water were good at 100 (p < 0.05). 'Good housing' was the maximum value (100) in each treatment group. As the percentage of floor increased, the minimum good housing was increased from 78 in 0% flattening rate to 96 in 50% flattening rate. The maximum (100) 'good health' was achieved in the 0% and 20% flattening rates, and it was 98, 98, and 99 in the 30%, 50%, and 40% flattening rate, respectively. 'Appropriate behavior' score was significantly lower than that of other paremeters, but when the flattening ratio was 0% and 20%, the maximum and minimum values were 10. At 40% and 50%, the maximum values were 39 and 49, respectively, and the minimum values were analyzed as 19 for both 40% and 50%. These results will be used as basic data about sow welfare for farmers to successfully transition to group housing and flat floors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.883-896
• /
• 2023

As human activities in Korea are spread throughout the mountains, forest fires often affect residential areas, infrastructure, and other facilities. Hence, it is necessary to detect fire-damaged areas quickly to enable support and recovery. Remote sensing is the most efficient tool for this purpose. Fire damage detection experiments were conducted on the east coast of Korea. Because this area comprises a mixture of forest and artificial land cover, data with low resolution are not suitable. We used Sentinel-2 multispectral instrument (MSI) data, which provide adequate temporal and spatial resolution, and the k-nearest neighbor (kNN) algorithm in this study. Six bands of Sentinel-2 MSI and two indices of normalized difference vegetation index (NDVI) and normalized burn ratio (NBR) were used as features for kNN classification. The kNN classifier was trained using 2,000 randomly selected samples in the fire-damaged and undamaged areas. Outliers were removed and a forest type map was used to improve classification performance. Numerous experiments for various neighbors for kNN and feature combinations have been conducted using bi-temporal and uni-temporal approaches. The bi-temporal classification performed better than the uni-temporal classification. However, the uni-temporal classification was able to detect severely damaged areas.

• Journal of Korea Water Resources Association
• /
• v.56 no.10
• /
• pp.631-639
• /
• 2023

Flash drought (FD), characterized by the rapid onset and intensification, can significantly impact ecosystems and induce immediate water stress. A more comprehensive understanding of the causes and characteristics of FD events is required to enhance drought monitoring. Therefore, we investigated the FD events took place over the Korean peninsula using Global Land Data Assimilation System (GLDAS) data from 2012 to 2022. We first detected FD events using the stress-based method (Standardized Evaporative Stress Ratio, SESR), and analyzed the frequency and duration of FDs. The FD events were classified into three cases based on the variations in Actual Evapotranspiration (AET) and potential Evapotranspiration (PET), and spatially analyzed. Results revealed that there are regional disparities in frequency and duration of FDs, with a mean frequency of 6.4 and duration of 31 days. When classified into Case 1 (normal condition), Case 2 (AET-driven), and Case 3 (PET-driven), we found that Case 2 FDs emerged approximately 1.5 times more frequently than those driven by PET (Case 3) across the Korean peninsula. Case 2 FDs were found to be induced under water-limited conditions, and led both AET and PET to be decreased. Conversely, Case 3 FDs occurred under energy-limited conditions, with increase in both. Case 2 FDs predominantly affected the northwestern and central-southern agricultural regions, while Case 3 occurred in the eastern region, characterized by forested land cover. These findings offers insights into our understanding of FDs over the Korean peninsula, considering climate factors, land cover, and water availability.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.2 no.1
• /
• pp.266-295
• /
• 1974

The purpose of this study is to make a contribution to the effective management of medical literature in Korean libraries and specifically to help to select medical books and periodicals by determining the value and life of medical literature by means of citation counting and analysis. This report will present methods of calculation and data collection to measure the importance, half life of medical literature and the authority of author for Korean medical libraries. The writer conducted comparative studies based on data covering a two-year period, 1970-1971, using about 16,899 citations in 1,032 articles of the above journals. The references and citations are counted and analyzed by the number of authors, periodicals. books and publication dates. By the following ratio. calculated by the citation counting and analysis, we can decide the rates of medical periodicals to books, foreign literature to domestic literature and literature of the most numerously cited. authors, for the selecting method of Korean Medical libraries. (1) It is disclosed that 61 main authors are cited 9 times. Most of them are Western authors, they are cited 14,374 times which represents 88.6 % of the total citations. (2) The cited medical literature is classified as follows: The ratio of cited medical periodicals to the cited medical books is 82.0%. (The books at a rate of 18.0%.) Therefore, the wnter concentrated the efforts on the analysis of periodicals. (3) Classification of the periodicals by countries indicates that about 11.2% of total citations are made from Korean medical literature. The medical activities in Korea are dependent on the advanced foreign countries at ratio of 88.8%. Of the foreign medical periodicals cited, Japanese literature represents only 4.5% while literature of European countries and America constitutes 84.3%. (4) If medical journals are arranged in order of decreasing productivity of articles on a given subject, they may be revealed that it is necessary to have 98 titles of key journals to cover 60% of information in the field of medical science and 60 titles for an average of 50%. (5) For the purpose of measuring the life of medical literature in Korea, the writer has calculated the half lives of periodicals and books as follows: Kinds of Literature 1. Periodicals 2. Books 3. Whole literature Half-lives 7.75 years 4.11 years 6.37 years (6) The half lives of domestic and Japanese literature in the medical science are comparatively short.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.393-404
• /
• 2008

The approaches in many design codes for the estimation of the deflection of flexural reinforced concrete (RC) members utilize the concept of the effective moment of inertia which considers the reduction of flexural rigidity of RC beams after cracking. However, the effective moment of inertia in design codes are primarily based on the ratio of maximum moment and cracking moment of beam subjected to loading without proper consideration on many other possible influencing factors such as span length, member end condition, sectional size, loading geometry, materials, sectional properties, amount of cracks and its distribution, and etc. In this study, therefore, an experimental investigation was conducted to provide fundamental test data on the effective moment of inertia of RC beams for the evaluation of flexural deflection, and to develop a modified method on the estimation of the effective moment of inertia based on test results. 14 specimens were fabricated with the primary test parameters of concrete strength, cover thickness, reinforcement ratio, and bar diameters, and the effective moments of inertia obtained from the test results were compared with those by design codes, existing equations, and the modified equation proposed in this study. The proposed method considered the effect of the length of cracking region, reinforcement ratio, and the effective concrete area per bar on the effective moment of inertia, which estimated the effective moment of inertia more close to the test results compared to other approaches.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.122-128
• /
• 1997

A pot experiment was carried out using Seomjin-byeo and Samgang-byeo to investigate the effects of nitrogen and sulfur on the growth, yields, and sulfur containing amino acid content of rice. The yields and number of tillers at 50 days after transplanting were increased with the increase of the amounts of nitrogen and sulfur, but N/S ratio was decreased in both varieties. There were a positive correlations between yield and contents of nitrogen and sulfur in straw and brown rice, but a negative correlation between N/S ratio and yields at harvesting stage. Crude protein contents increased with the increase of amounts of nitrogen and sulfur. contents of amino acid containing sulfur in brown rice were positively correlated with the sulfur and nitrogen contents in rice straw.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.4
• /
• pp.1-9
• /
• 2002

This study is carried out to make the environmentally affinitive porous planting block for revegetation and to make a effective program for greening plans. The summary is shown below. 1. In order to get stronger intensity and distribute proper porosity in the block for planting, the cements mixed with fine soil were used and the finer in soil grains gives the stronger in intensity of the cements. Use of the furnace slag cements instead of the portland cements showed relatively stronger in intensity of the block. The intensity of the block became stronger when the mixed ratio of the cements to soil is 5 : 1, but the pore space ratio was lower. The percolate pH of the portland cements after one month of treatment was 13.1 but the percolate pH of the furnace slag cements was shown lower. To mold proper porous planting blocks, the proper combination of additives such as the dehydrating agent, elastic agent and adhesives into the mixture of cements and soil gives better effectives. 2. After molding the porous planting blocks, it gave a better result when the grains of the filler made of peat moss, upland soil and compound fertilizer were smaller than 2 mm in size. Shaking of the filling materials also gave the better result, but it took more time and cost much more. Therefore, it was better when the filling materials were mixed with water first then flew down for stuffing. 3. It was necessary to cover with soil after seeding or planting on the porous planting blocks. The proper thickness of the soil to help root development and keep moisture is about 3~5 cm. 4. The plants for planting on the porous planting block were required stronger in the growth condition of their roots and their environmental adaptability. The average germination percentage and rate of Platycodon grandiflorum on the porous planting block were 88.8% and 85% accordingly and their rate is very uniform. The germination rates of Dianthus superbus var. longicalycinus and Taraxacum officinale were more than 50%. These grass species, Chelidonium majus var. asiaticum, Lysimachia mauritiana and Scabiosa mansenensis were the suggested biennial grasses in the planting area where exchanging of the seedling or nursery plants was not necessary because their germination rates were 59.3, 45.6 and 40.3% accordingly. Viola kapsanensis, Chrysanthemum sp., Taraxacum sp. and Iris ensata var. spontanea are the grass species that could be used by seeding for greening. However, the germination rate of Solidago virga-aurea var. asiatica, Aster scaber and Lythrum anceps were lower than 10%. The coverage ratio of Ixeris stolonifera is more than 80% after 60 days seeding and the root length of most of species are more than 10 cm except Iris ensata var. spontanea and Platycodon grandiflorum because their root developed thicker than other species.

• Resources Recycling
• /
• v.8 no.1
• /
• pp.23-28
• /
• 1999

Firing characteristics, transverse rupture strength, and heat capacity were studied of the heat-reservoir refractory materials made of red-firing clay, mill scale, and water glass. The firing shrinkage increased with increase of the clay proportion in samples. The volume of fired bodies showed shrinkage by drying up to $300^{\circ}C$, steady expansion in the 300-$700^{\circ}C$ range due to phase transition of iron oxides. and drastic expansion above $1200^{\circ}C$. Flexural strength decreased from 5.6 Mpa to 2.35 Mpa with the decrease of the ratio of clay to mill scale from 1:1 to 1:3 Heat capacities changed from 1.1 Joul/g$^{\circ}$C to 1.35 Joul/g$^{\circ}$C with the ratio of millscale to clay ratio from 1:1 to 1:3. Mill scale in the specimen appears to exist as liquid phase during firing. Firing the specimens in air leads to the eruption of the molten mill scale to the sample surfaces. Contrarily, firing samples in a refractory sagger with a cover suppressed the eruption of the molten mill scale to the surfaces. The addition of mill scale gave rise to porous sintered bodies which would delay cooling rates of heat-reservoir brick.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.236-245
• /
• 2021

It is very important for structure designer to understand the service life variation since a wide range of service life is evaluated with changing exposure conditions and design parameters. Recently, for zero-carbon, waste plastic has been used for fuel for clinker production and this yields increase in chloride content in cement. This study is for evaluation of changing service life in the concrete with increasing initial chloride content due to usage of plastic-SRF(Solid Refuse Fuel) considering various exposure conditions and design parameters. For this, 4 levels of initial chloride content were assumed, and the service life was assessed using LIFE 365 program considering various environmental conditions including 3 levels of surface chloride content. As for analysis parameters, critical/initial chloride content, blast furnace slag powder replacement ratio, W/B(Water to Binder) ratio, cover depth, and unit mass for binder are adopted. Service life decreases with increasing initial chloride content and a significant reduction of service life is not evaluated permitting up to 1,000ppm of initial chloride content. With increasing slag replacement ratio, a longer service life can be secured since blast furnace slag powder has the effect of reducing the diffusion of external chloride ions and fixing the free chloride. It is thought that increasing initial chloride content up to European standard is helpful for enhancing sustainability and reducing carbon emission. Though the reduction in service life due to an increase in the initial chloride content is not significant in slag-concrete with low surface chloride content, careful consideration for mixing design should be paid for the exposure environment with high surface chloride content.

• Korean Journal of Radiology
• /
• v.21 no.12
• /
• pp.1334-1344
• /
• 2020

Objective: Compressed sensing (CS) has gained wide interest since it accelerates MRI acquisition. We aimed to compare the 3D post-contrast T1-weighted volumetric isotropic turbo spin echo acquisition (VISTA) with CS (VISTA-CS) and without CS (VISTA-nonCS) in intracranial vessel wall MRIs (VW-MRI). Materials and Methods: From April 2017 to July 2018, 72 patients who underwent VW-MRI, including both VISTA-CS and VISTA-nonCS, were retrospectively enrolled. Wall and lumen volumes, signal-to-noise ratio (SNR), and contrast-to-noise ratio (CNR) were measured from normal and lesion sites. Two neuroradiologists independently evaluated overall image quality and degree of normal and lesion wall delineation with a four-point scale (scores ≥ 3 defined as acceptable). Results: Scan coverage was increased in VISTA-CS to cover both anterior and posterior circulations with a slightly shorter scan time compared to VISTA-nonCS (approximately 7 minutes vs. 8 minutes). Wall and lumen volumes were not significantly different with VISTA-CS or VISTA-nonCS (interclass correlation coefficient = 0.964-0.997). SNR was or trended towards significantly higher values in VISTA-CS than in VISTA-nonCS. At normal sites, CNR was not significantly different between two sequences (p = 0.907), whereas VISTA-CS provided lower CNR in lesion sites compared with VISTA-nonCS (p = 0.003). Subjective wall delineation was superior with VISTA-nonCS than with VISTA-CS (p = 0.019), although overall image quality did not differ (p = 0.297). The proportions of images with acceptable quality were not significantly different between VISTA-CS (83.3-97.8%) and VISTA-nonCS (75-100%). Conclusion: CS may be useful for intracranial VW-MRI as it allows for larger scan coverage with slightly shorter scan time without compromising image quality.