• Journal of Magnetics
• /
• 제16권1호
• /
• pp.10-14
• /
• 2011

This study reports on Co/$Co_2$MnSn two-phase magnets. The Co/$Co_2$MnSn two-phase magnet has Co precipitates in a $Co_2MnSn$ Heusler alloy matrix, in which the two phases are exchange-coupled at the phase boundary. The as-casted Co/$Co_2$MnSn system, which has Co-Mn solid solution precipitates in a $Co_2$MnSn Heusler alloy matrix, showed that the Co solid solution precipitates are crystallographically coherent and there is exchange coupling at the phase boundary. To form pure Co precipitates by removal of Mn solute atoms in Co-Mn solid solution, annealing was carried out 48 hours at $870^{\circ}C$. After annealing, the low $T_c$ and low magnetization phase of the Co-Mn solid solution became a high $T_c$ and high magnetization phase of hexagonal Co.

• 대한전자공학회논문지SD
• /
• 제38권9호
• /
• pp.624-633
• /
• 2001

회절격자 반주기 길이의 랜덤 변이가 QWS-DFB 레이저의 특성을 나타내는 척도인 xL 값에 미치는 영향을 알아보았다. QWS-DFB 레이저의 양 거울면은 무반사면으로 하였고, 회절격자 랜덤 변이는 평균이 0이고 분산이 1인 상관되어 있는 두 Gaussian 랜덤 변수로 나타내었다. 회절격자 반주기의 랜덤 변이가 있으면 동일 위상성분의 되먹임이 적어져 유효 xL 값이 감소하고 모드 간격이 줄어든다. 그런데, 회절격자 주기의 랜덤 변이가 있을 때 곁모드 간격에서 구한 결합계수 xL/sub SM/값과 주모드 거울면 손실에서 구한 xL/sub SM/는 일치하지 않으며, 랜덤 변이가 없을 때의 xL값보다 작다. 이 결과는 곁모드 간격 또는 spontaneous emission spectrum을 사용하여 측정한 xL/sub SM/ 값을 실제로 되먹임되는 정도를 나타내는 xL/sub eff/로 해석하여서는 안된다는 사실을 보여준다.

• 한국전자파학회논문지
• /
• 제15권11호
• /
• pp.1082-1089
• /
• 2004

본 논문에서는 개방 루프 공진기로 구현된 타원응답 필터의 소형화 및 결합행렬의 유사변환을 통한 설계의 유연성에 관해 연구하였다. 더불어 제안한 방법에 의하여 보다 큰 비대역폭을 갖는 필터를 제시하였다. 제안한 방법의 유효성을 확인하기 위해 개방 루프 공진기를 이용하여 중심 주파수(f$_{c}$) 2.0 GHz에서 0.04의 비대역폭(FBW)을 가지는 4차 타원응답 대역통과 필터를 설계하였다. 개방 루프 공진기의 혼합결합이 일어나는 부분의 선폭을 좁게 함으로써 구현된 두 개의 필터는 일정한 선폭을 가지는 공진기로 구현된 필터에 비해 각각 13%와 25%의 크기 감소 효과를 나타내었다. 또한, 요구되는 결합량을 만족시키기 위한 공진기 사이의 간격이 실현 불가능할 경우 결합행렬의 유사변환을 통하여 기존 구조와 동일한 특성을 나타내는 두 가지 다른 구조를 제시함으로써 필터 설계의 유연성을 보여주었으며 이로 인해 보다 큰 비대역폭(FBW=0.08)을 갖는 필터 설계가 가능함을 나타내었다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.52-60
• /
• 2002

Axiomatic Design is the one of many useful methods for making a good design. In this method, the independency of Functional Requirements (FRs) is an important property to determine whether the design is good or not. Until now so many designers have decided the independency between FRs by their own decisions. The way depending on inspiration is simple and fast, but it can not be considered as a precise conclusion. Also there are not exact rule that evaluate the quantitative independence between FRs. This paper will show the way to evaluate the quantitative independence of FRs from the comparison between FRs of lower levels, and develop more efficient and objective tool in Axiomatic Design.

• Journal of Photoscience
• /
• 제10권1호
• /
• pp.165-173
• /
• 2003

m-Phenylene-linked biscarbenes, bisnitrenes and carbenonitrenes can be formed photochemically from appropriate nitrogenous precursors. Generation of such reactive intermediates under matrix-isolation conditions allows for their characterization by spectroscopic techniques such as ESR, UV /vis and IR. The latter method is also useful in characterizing secondary products derived from these reactive intermediates. Computational chemistry methods complement experimental IR data, aiding, thus, in identification of such compounds. In addition electronic structure calculations help in developing qualitative and semi-quantitative models, which can be useful in predicting ground-state multiplicities. The parent systems of m-phenylene-linked carbenes and nitrenes have high-spin ground states, but a switching to lower multiplicity can be achieved by chemical substitution. The ground state and various low-lying excited states of m-phenylenecarbenonitrenes can be reasonably approximated by simple valence-bond depictions. Finally, m-phenylenecarbenonitrenes are photoreactive in the inert matrix isomerizing to cyclopropene derivatives.

• 제어로봇시스템학회논문지
• /
• 제17권9호
• /
• pp.857-862
• /
• 2011

This paper studies the output consensus problem for a class of heterogeneous linear multi-agent systems under a fixed directed communication network. The dynamics, as well as its dimension, of each agent can widely differ from the others, but all the agents are assumed to have the same transfer matrix. In addition, only the system outputs are constrained to be delivered through the network. Under these conditions, we show that the output consensus is reached by a group of identical controllers, which is designed to achieve the state consensus for the homogeneous multi-agent system obtained from the minimal realization of the transfer matrix. Finally, an example is given to demonstrate the proposed result.

• Structural Engineering and Mechanics
• /
• 제57권3호
• /
• pp.389-402
• /
• 2016

Based on the traditional mechanical model of thin-walled straight beam, the paper makes analysis and research on the pre-twisted thin-walled beam finite element numerical model. Firstly, based on the geometric deformation differential relationship, the Saint-Venant warping strain of pre-twisted thin-walled beam is deduced. According to the traditional thin-walled straight beam finite element mechanical model, the finite element stiffness matrix considering the Saint-Venant warping deformations is established. At the same time, the paper establishes the element stiffness matrix of the pre-twisted thin-walled beam based on the classic Vlasov Theory. Finally, by calculating the pre-twisted beam with elliptical section and I cross section and contrasting three-dimensional solid finite element using ANSYS, the comparison analysis results show that pre-twisted thin-walled beam element stiffness matrix has good accuracy.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.808-813
• /
• 1999

A fuzzy learning method to control an unstable and multivariable system is presented in this paper, Because the multivariable system has generally a coupling effect between the inputs and outputs, it is difficult to find its modeling equation or parameters. If the system is unstable, initial condition rules are needed to make it stable because learning is nearly impossible. Therefore, this learning method uses the initial rules and introduces a cost function composed of the actual error and error-rate of each output without the modeling equation. To minimize the cost function, we experimentally got the Jacobian matrix in the operating point of the system. From the Jacobian matrix, we can find the direction of the convergence in the learning, and the optimal control rules are finally acquired when the fuzzy rules are updated by changing the portion of the errors and error rates.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.226-232
• /
• 2003

Difficulties in the finite element modeling of human spine are evaded by using a stiffness matrix element whose properties can be characterized from experimentally measured stiffness of functional spinal units. Relative easiness is in that inter-vertebral discs, ligaments, and soft tissues connecting vertebrae do not need to be modeled as they are. The remarkable coupling effect between distinct degrees of freedom induced by the geometric complexity can be accommodated without much effort. An idealized block model with simple geometry for vertebra is employed to assess the feasibility of this method. Analyses are performed in both levels of motion segment and spinal column, and the result is compared with that from detail model. As far as the global behavior of spine is concerned, the simplification is found not to aggravate inaccuracy only if sufficient experimental data is provided and interpreted properly.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.124-131
• /
• 1999

DVD(Digital Versatile Disk) is the data storage media devised to make high storage density and high speed data input/output possible. For example, a whole length movie can be stored in a disk as large as a CD(Compact Disk). Therefore higher rotational speed and better accuracy in optical pick-up are required compared with the existing optical storage device. Without these operational functional requirements being satisfied DVD will lose its place as the high capacity storage device. This paper evaluated whether the currently developed DVD satisfies the requirements and provides improved methods with the Axiomatic Approach which is superb in evaluating and designing newly concepted designs.