• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8A
• /
• pp.814-819
• /
• 2006

This paper presents the impacts of Ultra Wide-Band(UWB) system applied in Indoor and Handhold communications using frequency band from 3.1 GHz to 10.6 GHz on Wireless Broad-band(WiBro) system based on Orthogonal Frequency Division Multiplexing(OFDM) using frequency of 2.3 GHz. The Minimum Coupling Loss(MCL) method for the case of single interference and Monte Carlo(MC) simulation for multiple interference considering practical scenario were used to evaluate the interference effects of UWB system on WiBro system. As a result, the minimum separation distance between single interferer and the victim receiver required 34.4 m and above to guarantee the co-existence. Also, the UWB transmitting PSD of around - 81 dBm / MHz below should be required to meet the minimum throughput loss of WiBro mobile station in case of multiple UWB interference.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.125-129
• /
• 2000

In this paper, We designed and fabricated C-band bandpass filter using dielectric resonators. From waveguide cutoff frequency which applied the region between adjacent dielectric resonators, the height of cavity is determined. The cavity's diameter is determined to the twice of dielectric resonator's diameter considering the conductor loss. The resonant frequency of the DR-cavity is calculated with travelling wave mode analysis. Conventionally, circular cylindrical dielectric resonator is analysed by Cohn's model which use the evanescent mode in the region between dielectric resonator wall and circular cavity wall, which is an approximated method. The external quality factor, Q$_{ex}$ has found with simulation result using Ansoft's Maxwell simulation tool. The designed filter using dielectric resonators with dielectric constant of 45 has the passband center at 5.065GHz. The bandpass filter using dielectric resonators have about 1dB insertion loss. 20MHz bandwidth and more than 30dB attenuation at f$_{0}$$\pm$15MHz.z.z.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.5
• /
• pp.36-41
• /
• 2007

We report the 94 GHz CPW branch-line bandpass filter for planar integrated millimeter-wave circuits. The branch-line coupler operates as a transversal filtering section by connecting the coupling ports to the open load stubs and taking the isolation port as the output node. For design of the 94 GHz branch-line bandpass filter, we built the CPW library and optimized the characteristic impedances and the lengths of the branch-line coupler and the open load stubs. The fabricated 94 GHz bandpass filter exhibits an insertion loss of 2.5 dB with an 11.7 % 3 dB relative bandwidth and the return loss is -18.5 dB at a center frequency of 94 GHz.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.559-565
• /
• 2014

A 3 dB coupler has been designed and implemented using the most commonly used double-sided FR4 boards. The coupling and the bandwidth of the coupler are enhanced with the enlarged overlapped area of the coupler. Major design parameters are plotted as a design guide and the parameters are verified by simulation and measurement. The size of the manufactured coupler is $30{\times}14mm^2$. Its measured insertion loss and phase difference are 0.6 dB and $90.5^{\circ}$ at center frequency of 2.5 GHz, respectively. The operating frequency range is 1.72 GHz to 3.08 GHz for $3.6{\pm}0.5dB$ insertion loss. The coupler has the performance similar to that of conventional Lange coupler, and implementation of the coupler is easy and cheap with wide metal width and spacing and no additional wire bonding process.

• The Korean Journal of Physiology and Pharmacology
• /
• v.5 no.5
• /
• pp.367-371
• /
• 2001

The chromosome 7-linked long QT syndrome (LQT2) is caused by mutations in the human ether-a- go-go-related gene (HERG) that encodes the rapidly activating delayed rectifier $K^+$ current, $I_{Kr},$ in cardiac myocytes. Different types of mutations have been identified in various locations of HERG channel. One of the mechanisms for the loss of normal channel function is due to membrane trafficking of channel protein. The decreased channel function in some deletion mutants appears to be due to loss of coupling with wild type HERG to form the functional channel as the tetramer. Most of missense mutants with few exceptions could interact with wild type HERG to form functional tetramer and caused dominant negative suppression with co-injection with wild type HERG showing variable effects on current amplitude, voltage dependence, and kinetics of activation and inactivation. Two missense mutants at pore regions of HERG found in Japanese LQT2 (A614V and V630L) showed accentuated inward rectification due to a negative shift in steady-state inactivation and fast inactivation. One mutation in S4 region (R534C) produced a negative shift in current activation, indicating the S4 serving as the voltage sensor and accelerated deactivation. The C-terminus mutation, S818L, could not express the current by mutant alone and did not show dominant negative suppression with co-injection of equal amount of wild type cRNA. Co-injection of excess amount of mutant with wild type produced dominant negative suppression with a shift in voltage dependent activation. Therefore, multiple mechanisms are involved in different mutations and functional abnormality in LQT2. Further characterization with the interactions between various mutants in HERG and the regulatory subunits of the channels (MiRP1 and minK) is to be clarified.

• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.287-294
• /
• 2012

In the high vacuum condition of the space, outgassing from any assembly of satellite can contaminate satellites, especially second surface mirror and optical lens, it cause satellite to fail in own missions. Therefore, all unit shall be check for compatibility with vacuum using CVCM (Collected Volatile Condensable Material) and TML (Total Mass Loss) in advance. CVCM and TML of the PZT-5 piezoelectric ceramic vibrator has less than 0.1% and 1.0% respectively. Also, it has less than 500 $ng/cm^2/hr$ of Thermoelectric Quartz Crystal Microbalance for vacuum bake-out test using high temperature(more than $80^{\circ}C$) and high vacuum (less than $5.0{\times}10^{-3}$ Pa). Thus, piezoelectric ceramic vibrator may be employed in the vacuum environments. Finally, it can be confirmed that the characteristics change of the piezoelectric ceramic vibrator is less than 1% under vacuum environments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.805-814
• /
• 1999

In this paper, elliptic function bandpass filters using ceramic coaxial resonators are designed. Since elliptic function filters have better performance of frequency selectivity than those based on Butterworth or Chebyshev, therefore it is possible to make better use of limited frequency resources. Elliptic function bandpass filters using ceramic coaxial resonators are designed for reducing it's size, weight, cost and for easy manufacturing and tuning. From measurements, an accurate resonator model is obtained and the coupling coefficient values are extracted. Based on these results, elliptic function bandpass filters are designed. The experimental results have shown that the 8th order elliptic function filter of 959 MHz center frequency with 28 MHz bandwidth using coaxial ceramic resonators have about more tan 17 dB return loss, 5 dB insertion loss, more than 20 dB attenuation at $f_c\pm$5 MHz.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.15-22
• /
• 2018

In this paper, a microstrip-fed triple-band monopole antenna for WLAN/WiMAX applications was proposed. The proposed antenna is consist of two arc-shaped and one strip line structure, then get the three current path and then designed in order to get triple resonant characteristics. We carried out simulation about parameters. Taking account of coupling effect, Adjusted the length of the two arc-shaped and one strip line, we get the optimized parameters. The proposed antenna is fabricated on an FR-4 substrate, the dielectric constant is 4.4, and total size is $23.5mm(W1){\times}32.0mm(L1){\times}1.0mm(t)$, and its proposed antenna size is $21.0mm(W6){\times}31.0mm(L7)$. From the measured results, return loss of the proposed antenna satisfied return loss 927 MHz (1.844~2.771 GHz), 926 MHz (3.33~4.256 GHz), and 1,415 MHz (5.13~6.545 GHz). And measured results of gain and radiation patterns displayed for operating bands.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.73-79
• /
• 2008

We propose a novel metal-waveguide structure for sustaining long-range surface-plasmon-polaritons (LRSPP). The LRSPP waveguides are composed basically of two asymmetric metal layers: a very thin, finite-width metal strip on top of a metal slab with a dielectric gap in between them. Mode cut-off of LRSPPs excited on the double-metal waveguides is characterized by consistently investigating their dispersion relations and mode profiles. We also confirm experimentally the existence of low-loss, well-confined LRSPP modes by measuring far-field outputs emerging from an edge of the asymmetric double-metal waveguides. In the experiment, we have fabricated several types of SPP waveguide devices including straight lines, S-bend, and Y-branch consisting of gold strips (20 nm-thick, $5{\mu}m$-wide). Overall propagation loss of the proposed double-metal waveguides is quite comparable to that of single metal-strip waveguides, in addition the mode sizes can be tuned by increasing the core-insulator gap between the metal layers to get a higher coupling efficiency with a single-mode fiber in telecom wavelength. The proposed LRSPP waveguides may open up realization of SPP-waveguide sensors or nonlinear SPP-devices by replacing the core-insulator with a bio-fluid or a nonlinear medium.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.63-69
• /
• 2000

The high-$T_c$ Superconducting (HTS) antenna which consists of "H" type resonator has the benefits for the miniaturization of antenna in comparison with the microstrip antenna of the similar dimension. To fabricate the "H" type antenna, HTS $YBa_2Cu_3O_{7-x}$ (YBCO) thin films were deposited on MgO substrates using rf-magnetron sputtering. Standard etching processes were performed for the patterning of the "H" type antenna. For comparison between normal conducting antennas and superconducting antennas, the gold antennas with the same dimension were also fabricated. An aperture coupling was used for impedance matching between $50{\Omega}$ feed line and HTS radiating patch. The diverse experimental results were reported in terms of the resonant frequency, the return loss and the characteristics impedance. The "H" type superconducting antenna showed the performance of 1.36 in SWR, 24% in efficiency, and 14.6 dB in the return loss superior of the normal conducting counterpart.