• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1933-1943
• /
• 2001

A micromechanical model is presented for superplasticity in which heterogeneous microstructures are coupled with deformation behavior. The effects of initial distributions of grain size, and their evolutions on the mechanical properties can be predicted by the model. Alternative stress rate models such as Jaumann rate and rotation incremental rate have been employed to analyze uniaxial loading and simple shear problems and the appropriate modeling was studied on the basis of hypoelasticity and elasto-viscoplasticity. The model has been implemented into finite element software so that full process simulation can be carried out. Tests have been conducted on Ti-6Al-4V alloy and the microstructural features such as grain size, distributions of grain size, and volume fraction of each phase were examined for the materials that were tested at different strain rates. The experimentally observed stress-strain behavior on a range of initial grain size distributions has been shown to be correctly predicted. In addition, the effect of volume fraction of the phases and concurrent grain growth were analyzed. The dependence of failure strain on strain rate has been explained in terms of the change in mechanism of grain growth that occurs with changing strain rate.

• Journal of Microbiology and Biotechnology
• /
• 제33권7호
• /
• pp.895-908
• /
• 2023

Disposal of waste containing heavy metals into the environment is a major threat to human health and can result in toxic or chronic poisoning in aquatic life. In the current study, metal-resistant Raoultella ornithinolytica was isolated from metal-contaminated samples collected from the Tanjaro River, located southwest of Sulaymaniyah, Iraq. R. ornithinolytica was identified by partial amplification of 16S rRNA. The uptake potency of heavy metals was assessed using inductively coupled plasma-optical emission spectroscopy (ICP-OES) and indicated that R. ornithinolytica removed 67, 89, 63.4, 55.6, 56.5, 65, and 61.9% of Cd, Pb, Cr, Ni, Zn, Co, and Fe, respectively. These removal rates were influenced by temperature, pH, and contact time; at 35℃ and pH 5 with a change in the incubation time, the reduction rate improved from 89 to 95% for Pb, from 36.4 to 45% for Cu, and from 55.6 to 64% for Ni. Gene analysis indicated that R. ornithinolytica contained pbrT, chrB, nccA, iroN, and czcA genes, but the pcoD gene was absent. Energy-dispersive X-ray spectroscopy (EDS) images showed evidence of metal ion binding on the cell wall surface with different rates of binding. Transmission electron microscopy (TEM) detected different mechanisms for metal particle localization; cell surface adsorption was the main mechanism for Pb, Zn, and Co uptake, while Cd, Ni, and Fe were accumulated inside the cell. The current study describes, for the first time, the isolation of R. ornithinolytica from metal-contaminated water, which can be used as an eco-friendly biological expedient for the remediation and detoxification of metals from contaminated environments.

• 한국지리정보학회지
• /
• 제14권3호
• /
• pp.36-51
• /
• 2011

본 연구의 목적은 지리정보를 활용하여 기후변화에 따른 지하수 함양량 산정 모델 개발 및 검증을 수행하는 것이다. 이를 위하여 기후변화에 따른 지하수 함양량 변화를 산정하는 방법론을 제시하였고, 지리정보시스템을 활용하여 연구지역의 시기별 미래 지하수 함양량을 추정하였다. 연구지역은 낙동강 본류를 포함하는 낙동강 유역을 선정하였다. 최종 연구결과는 미래 기후변화에 따른 시기별 강우량, 함양률, 함양량을 추정하였다. 함양량 및 함양률은 기후변화에 따른 강우량의 변화와 함께 변화하는 추세를 나타내고 있는 것으로 파악되었다. 본 연구에서는 지리정보를 활용하여 기존에 기후변화와 지하수 함양량의 불명확한 관계를 정량적으로 분석하였으며, 미래 기후변화 예측 결과를 반영한 연구지역 내 지하수 함양률 변화를 시-공간적으로 산정하였다. 또한 유역내 기저유출량과 비교 분석을 통하여 검증하였다. 앞으로 연계모델의 고도화 방안 및 현장조사가 추가 된다면 보다 정량적으로 기후변화와 지하수 함양량의 상관관계를 파악 할 수 있으며, 향후 본 연구는 수자원으로 이용이 증가되는 지하수의 전반적인 관리 및 효율적인 운영 체제 구축을 위한 한 축을 차지 할 수 있다는 점에서 중요성이 있다고 하겠다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.179-200
• /
• 1996

The intrinsic instabilities of fluid flow occurred in the melt of the Czochralski crystal growth system Czochralski method, asymmetric flow patterns and temperature profiles in the melt have been studied by many researchers. The idea that the non-symmetric structure of the growing equipment is responsible for the asymmetric profiles is usually accepted at the first time. However further researches revealed that some intrinsic instabilities not related to the non-symmetric equipment structure in the melt could also appear. Ristorcelli had pointed out that there are many possible causes of instabilities in the melt. The instabilities appears because of the coupling effects of fluid flow and temperature profiles in the melt. Among the instabilities, the B nard type instabilities with no or low crucible rotation rates are analyzed by the visualizing experiments using X-ray radiography and the 3-D numerical simulation in this study. The velocity profiles in the Silicon melt at different crucible rotation rates were measured using X-ray radiography method using tungsten tracers in the melt. The results showed that there exits two types of fluid flow mode. One is axisymmetric flow, the other is asymmetric flow. In the axisymmetric flow, the trajectory of the tracers show torus pattern. However, more exact measurement of the axisymmetrc case shows that this flow field has small non-axisymmetric components of the velocity. When fluid flow is asymmetric, the tracers show random motion from the fixed view point. On the other hand, when the observer rotates to the same velocity of the crucible, the trajectory of the tracer show a rotating motion, the center of the motion is not same the center of the melt. The temperature of a point in the melt were measured using thermocouples with different rotating rates. Measured temperatures oscillated. Such kind of oscillations are also measured by the other researchers. The behavior of temperature oscillations were quite different between at low rotations and at high rotations. Above experimental results means that the fluid flow and temperature profiles in the melt is not symmetric, and then the mode of the asymmetric is changed when rotation rates are changed. To compare with these experimental results, the fluid flow and temperature profiles at no rotation and 8 rpm of crucible rotation rates on the same size of crucible is calculated using a 3-dimensional numerical simulation. A finite different method is adopted for this simulation. 50×30×30 grids are used. The numerical simulation also showed that the velocity and flow profiles are changed when rotation rates change. Futhermore, the flow patterns and temperature profiles of both cases are not axisymmetric even though axisymmetric boundary conditions are used. Several cells appear at no rotation. The cells are formed by the unstable vertical temperature profiles (upper region is colder than lower part) beneath the free surface of the melt. When the temperature profile is combined with density difference (Rayleigh-B nard instability) or surface tension difference (Marangoni-B nard instability) on temperature, cell structures are naturally formed. Both sources of instabilities are coupled to the cell structures in the melt of the Czochralski process. With high rotation rates, the shape of the fluid field is changed to another type of asymmetric profile. Because of the velocity profile, isothermal lines on the plane vertical to the centerline change to elliptic. When the velocity profiles are plotted at the rotating view point, two vortices appear at the both sides of centerline. These vortices seem to be the main reason of the tracer behavior shown in the asymmetric velocity experiment. This profile is quite similar to the profiles created by the baroclinic instability on the rotating annulus. The temperature profiles obtained from the numerical calculations and Fourier transforms of it are quite similar to the results of the experiment. bove esults intend that at least two types of intrinsic instabilities can occur in the melt of Czochralski growing systems. Because the instabilities cause temperature fluctuations in the melt and near the crystal-melt interface, some defects may be generated by them. When the crucible size becomes large, the intensity of the instabilities should increase. Therefore, to produce large single crystals with good quality, the behavior of the intrinsic instabilities in the melt as well as the effects of the instabilities on the defects in the ingot should be studied. As one of the cause of the defects in the large diameter Silicon single crystal grown by the

• Environmental Engineering Research
• /
• 제18권3호
• /
• pp.169-176
• /
• 2013

The present study was designed to examine the concentrations, emission rates, and source characteristics of a variety of volatile organic compounds (VOCs) in 30 newly-constructed apartment buildings by measuring indoor and outdoor VOC concentrations over a 2-year period. For comparison, seven villa-type houses were also surveyed for indoor and outdoor VOC concentrations over a 3-month period. Indoor and outdoor air samples were collected on Tenax-TA adsorbent and analyzed using a gas chromatograph (GC)/mass spectrometer system or a GC/flame ionization detector system coupled to a thermal desorption system. The long-term change in indoor VOC concentrations depended on the type of VOCs. Generally, aromatic (except for naphthalene), aliphatic, and terpene compounds exhibited a gradual deceasing trend over the 2-year follow-up period. However, the indoor concentrations of the six halogenated VOCs did not significantly vary with time changes. Similar to these halogenated VOCs, the indoor naphthalene concentrations did not vary significantly with time changes over the 2-year period. Unlike the halogenated VOCs, the indoor naphthalene concentrations were much higher than the outdoor concentrations. The indoor concentrations of aliphatic and aromatic compounds were higher for the villa-type houses when compared to those of apartment buildings. In addition, four source groups (floor coverings and interior painting, household products, wood paneling and furniture, moth repellents) and three source groups (floor coverings and interior painting, household products, and moth repellents) were considered as potential VOC sources inside apartment buildings for the first- and second-year post-occupancy stages, respectively.

• 한국해양학회지:바다
• /
• 제14권2호
• /
• pp.80-89
• /
• 2009

동해의 독도 사면 지역에서 퇴적물 선상 배양과 $^{15}N$ isotope pairing technique를 이용하여 측정한 퇴적물 산소요구량과 탈질소화율은 각각 $1.04{\sim}9.08\;mmol\;m^{-2}\;d^{-1}$와 $7.06{\sim}37.67\;{\mu}mol\;m^{-2}\;d^{-1}$로 유사한 수심의 다른 심해 지역에 비해 모두 높게 측정되었다. 퇴적물 산소요구량과 탈질소화율은 퇴적물 내 유기 탄소 함량이 높은 정점에서 높았으며, 표층 퇴적물 내 유기물 함량은 질산화에 의해 생성된 질산염을 이용하는 탈질소화(coupled nitrification-denitrification)와 높은 상관관계를 보였다. 이는 본 조사 지역의 퇴적물 산소요구량뿐만 아니라 탈질소화율 역시 표층 퇴적물 내 유기물에 가장 큰 영향을 받는 것을 시사한다. 독도 사면 지역의 표층 퇴적물 내 유기 탄소 함량은 $1.8{\sim}2.4%$로 다른 심해 지역보다 높게 측정되었으며, 이는 높은 일차생산량에 의해 내보내기 생산이 높기 때문으로 추정된다. 독도 사면 지역에서 표층 퇴적물 내 유기물 농도는 일차생산에 의한 내보내기 생산에 의해 조절되며, 내보내기 생산이 퇴적물에서 일어나는 퇴적물 산소요구량과 탈질소화율 같은 유기물 분해율의 가장 큰 조절 요인인 것으로 추정된다.

• 환경정책연구
• /
• 제9권2호
• /
• pp.157-184
• /
• 2010

본 논문에서는 실질적인 기후변화에 따른 지하수 함양량 산정 모델 개발 및 관리방안을 마련하기 위하여 기후변화에 따른 지하수 함양량 변화를 산정하는 방법론을 제시하였고, 지리정보시스템을 활용하여 연구지역의 미래 시기별 지하수 함양량을 추정하였다. 이를 바탕으로 향후 기후변화에 따른 지하수 수자원 통합관리방안에 대한 정책적 사항을 제안하였다. 연구지역은 낙동강 본류를 포함하는 경상북도 칠곡군, 구미시 일부 및 대구시 북구 일부이며, 최종 연구결과는 미래 기후변화에 따른 시기별 강우량, 함양률, 함양량을 추정하였다. 함양량 및 함양률은 기후변화에 따른 강우량의 변화와 함께 변화하는 추세를 나타내고 있는 것으로 파악되었다. 본 논문에서는 기존의 기후변화와 지하수 함양량의 불명확한 관계를 정량적으로 분석하였으며, 미래 기후변화 예측 결과를 반영한 연구지역 내 지하수 함양률 변화를 시-공간적으로 산정하고, 기존 산정 결과와의 비교를 통해, 향후 기후변화를 고려한 국내 지하수 수자원의 관리방안 수립을 위한 방향을 제시하고자 하였다. 앞으로 연계모델의 고도화 방안 및 현장조사가 추가된다면 보다 정량적으로 기후변화와 지하수 함양량의 상관관계를 파악할 수 있으며, 향후 수자원으로 이용이 증가될 지하수의 전반적인 관리 및 효율적인 운영체제 구축을 위한 한 축을 차지할 수 있다는 점에서 중요성이 있다고 하겠다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.93-93
• /
• 2016

Large scale integrated circuits (LSIs) has been improved by the shrinkage of the circuit dimensions. The smaller chip sizes and increase in circuit density require the miniaturization of the line-width and space between metal interconnections. Therefore, an extreme precise control of the critical dimension and pattern profile is necessary to fabricate next generation nano-electronics devices. The pattern profile control of plasma etching with an accuracy of sub-nanometer must be achieved. To realize the etching process which achieves the problem, understanding of the etching mechanism and precise control of the process based on the real-time monitoring of internal plasma parameters such as etching species density, surface temperature of substrate, etc. are very important. For instance, it is known that the etched profiles of organic low dielectric (low-k) films are sensitive to the substrate temperature and density ratio of H and N atoms in the H2/N2 plasma [1]. In this study, we introduced a feedback control of actual substrate temperature and radical density ratio monitored in real time. And then the dependence of etch rates and profiles of organic films have been evaluated based on the substrate temperatures. In this study, organic low-k films were etched by a dual frequency capacitively coupled plasma employing the mixture of H2/N2 gases. A 100-MHz power was supplied to an upper electrode for plasma generation. The Si substrate was electrostatically chucked to a lower electrode biased by supplying a 2-MHz power. To investigate the effects of H and N radical on the etching profile of organic low-k films, absolute H and N atom densities were measured by vacuum ultraviolet absorption spectroscopy [2]. Moreover, using the optical fiber-type low-coherence interferometer [3], substrate temperature has been measured in real time during etching process. From the measurement results, the temperature raised rapidly just after plasma ignition and was gradually saturated. The temporal change of substrate temperature is a crucial issue to control of surface reactions of reactive species. Therefore, by the intervals of on-off of the plasma discharge, the substrate temperature was maintained within ${\pm}1.5^{\circ}C$ from the set value. As a result, the temperatures were kept within $3^{\circ}C$ during the etching process. Then, we etched organic films with line-and-space pattern using this system. The cross-sections of the organic films etched for 50 s with the substrate temperatures at $20^{\circ}C$ and $100^{\circ}C$ were observed by SEM. From the results, they were different in the sidewall profile. It suggests that the reactions on the sidewalls changed according to the substrate temperature. The precise substrate temperature control method with real-time temperature monitoring and intermittent plasma generation was suggested to contribute on realization of fine pattern etching.

• 공업화학
• /
• 제18권1호
• /
• pp.24-28
• /
• 2007

$Cl_2/Ar$ 가스의 고밀도 플라즈마를 이용하여 ZnO 박막에 대한 식각이 연구되었다. $Cl_2$ 가스의 농도, coil rf power, dc-bias 전압, 그리고 공정 압력을 변화시켜서 ZnO 박막의 식각특성을 체계적으로 조사하였다. $Cl_2$ 가스의 농도가 증가할수록 ZnO 박막의 식각 속도는 증가하였고, 식각된 패턴 주변의 재증착은 감소되었지만 식각된 패턴의 측면 경사는 낮아졌다. Coil rf power와 dc-bias 전압이 증가할수록 ZnO 박막의 식각 속도가 증가하였고, 식각 프로파일이 개선되었다. 공정 압력이 증가 할수록 ZnO 박막의 식각 속도가 미세하게 증가하였으나 식각 프로파일의 변화는 관찰되지 않았다. 이러한 결과들을 토대로 하여 ZnO 박막의 최적의 식각 조건이 설정되었다. 재증착이나 잔류물이 없이 대략 $75^{\circ}{\sim}80^{\circ}$의 높은 이방성 식각을 갖는 ZnO 박막의 식각이 20% $Cl_2$ 가스의 농도, 1000 W의 coil rf power, 400 V의 dc-bias 전압, 그리고 5 mTorr의 공정 압력에서 성공적으로 이루어졌다.

• 한국석유지질학회지
• /
• 제5권1_2호
• /
• pp.36-47
• /
• 1997

본 연구에서는 기존 Exxon group의 순차층서 모델이 갖고 있는 적용의 한계성을 극복하기 위하여 다중변수 순차층서 모델을 제시하였다. 이 모델에서는 2~3차수의 주기성을 갖고 변화되는 범세계적 해수면 변동, 지구조운동, 퇴적물 공급 등의 영향요소를 모두 변수로 간주하며, 이들 요소에 의해 순차층의 내부구성과 경계면 타입이 결정된다. 순차층을 구성하는 기본 단위로 해석적 층서단위인 퇴적계 연합체(systems tract)대신, 내부 지층의 집적형태에 의해 구분되는 기술적 층서단위인 부순차층세트(parasequence set)를 채택하였으며, 부순차층세트의 타입은 상대적 해수면 변동과 퇴적물 공급속도의 변화를 반영한다. 따라서 본 순차층서 모델은, 네 가지 타입의 상대적 해수면 변동과 세 등급의 퇴적물 공급 변화 사이의 조합으로써 예상되는 단일 또는 $2{\~}4$개의 부순차층세트로 구성된 7가지 타입의 순차층을 보여준다. 다중변수 순차층서 모델을 울릉분지 남서부 대륙주변부에 적용한 결과, 순차층의 타입은 울릉분지의 형성과 닫힘에 따른 3단계의 분지주변부 지구조 운동의 변화를 잘 반영한다. 즉, 순차층을 구성하는 부순차층세트 조합의 변화와 울릉분지 지구조 운동의 타입과 속도가 시기적으로 일치 한다. 해저면의 급격한 침강을 동반한 울릉분지의 후열도 열개 동안에는 분지의 급격 한 침강으로 인해 상대적 인 해수면은 지속적으로 상승되었고, 많은 양의 퇴적물이 공급되어 1개의 부순차층세트로 구성된 순차층이 형성되었다. 이후, 압축성 변형을 동반한 울릉분지의 닫힘 동안에는, 분지 침강이 느려지고 국지적으로 융기가 일어나 하강 또는 상승우세의 상대적 해수면 변동이 야기되었고, 또한 지구조적 요인에 의해 통제되는 퇴적물 집적속도의 지역적인 차이로 인하여 변형대와 비변형대에서 상이한 순차층이 형성되었다. 분지 닫힘단계 이후에는 다시 해저면이 전반적으로 침강되면서, 상승이 우세한 상대적 해수면 변동과 보통 또는 빠른 퇴적물 집적속도가 결합하여 2-3개의 부순차층세트로 구성된 순차층을 형성하였다.