• Structural Engineering and Mechanics
• /
• 제60권3호
• /
• pp.529-545
• /
• 2016

In this article, the generalized coupled non-Fickian diffusion-thermoelasticity analysis is carried out using an analytical method. The transient behaviors of field variables, including mass concentration, temperature and displacement are studied in a strip, which is subjected to shock loading. The governing equations are derived using generalized coupled non-Fickian diffusion-thermoelasticity theory, which is based on Lord-Shulman theory of coupled thermoelasticity. The governing equations are transferred to the frequency domain using Laplace transform technique and then the field variables are obtained in analytical forms using the presented method. The field variables are eventually determined in time domain by employing the Talbot technique. The dynamic behaviors of mass concentration, temperature and displacement are studied in details. It is concluded that the presented analytical method has a high capability for simulating the wave propagation with finite speed in mass concentration field as well as for tracking thermoelastic waves. Furthermore, the obtained results are more realistic than that of others.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1706-1711
• /
• 2016

Electromagnetic wave simulation was performed to predict characteristics of manufactured cutoff probe at low temperature magnetized plasma medium. Microwave cutoff probe is designed for research the properties of magnetized inductively coupled plasma. It was shown that the cutoff probe method can safely be used for weakly magnetized high density plasma sources. Cutoff probe system with two port network analyzer has been prepared and applied to measure electron density distributions in large area, 13.56MHz driven weakly magnetized inductively coupled plasma source. The results shown that, the plasma frequency confirmed cut-off characteristics in low temperature plasma. Especially, cut-off characteristics was found at upper hybrid resonance frequency in the environment of the magnetic field. In case of a induced weak magnetic field in inductively coupled plasma, plasma density estimated from the cutoff frequency in the same way at unmagnetized plasma due to nearly same plasma frequency and upper hybrid resonance frequency. The plasma density is increased and uniformity is improved by applying a induced weak magnetic field in inductively coupled plasma.

• 한국진공학회지
• /
• 제17권5호
• /
• pp.400-407
• /
• 2008

본 연구에서는 축전 결합형 플라즈마원에 대한 전자기장의 2차원 공간 의존성을 계산하였다. 1차원 유체 방정식을 기반으로 축전 전기장과 전도 전류 밀도의 axial 방향 공간 의존성을 계산한 후, radial 방향으로는 맥스웰 방정식의 해를 ${\omega}r/c$에 대한 power series로 전개하여 전자기장의 2차원 공간 의존성을 계산하였다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.259-262
• /
• 2002

The problems of electromagnetic coupling and radiation in an aperture-coupled microstrip antenna structure are discussed while focusing on the difference between two representative field configuration: parasitic-type and cavity-type. Based on the discussion, a critical look is taken at the validity of a previous description of the coupling mechanism of m aperture-coupled microstrip antenna.

• 센서학회지
• /
• 제8권3호
• /
• pp.211-218
• /
• 1999

This paper describes the application of a coupled finite element-boundary element method (FE-BEM) to obtain the steady-state response of a piezoelectric transducer. The particular structure considered is a PZT4 disc-typed projector. The projector is three-dimensionally simulated to transduce applied electric charge on axial surfaces of the piezoelectric disc to acoustic pressure in air or in water. The directivity pattern of the acoustic field formed from the projected sound pressure is also simulated. And the displacement of the disc caused by the externally applied electric charge is shown in temporal motion. The coupled FE-BE method is described in detail.

• Journal of Magnetics
• /
• 제15권3호
• /
• pp.138-142
• /
• 2010

This paper reports the development of an analysis method in a synchronous reluctance motor (SynRM) using the finite element method (FEM) coupled with the electromagnetic field of the Preisach model, which represents an additional thermal source due to hysteresis loss and a thermal field. This study focused on thermal analysis relative to hysteresis and copper losses in a SynRM.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1235-1236
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.555-556
• /
• 2007

• 한국전기전자재료학회논문지
• /
• 제15권8호
• /
• pp.713-719
• /
• 2002

In this study, the vertically well-aligned CNTs were synthesized by DC bias-assisted inductively coupled plasma hot-filament chemical vapor deposition (ICPHFCVD) using radio-frequence plasma of high density and that CNTs were vertically grown on Ni(300 )/Cr(200 )-deposited glass substrates at 58$0^{\circ}C$. This system(ICPHFCVD) added to tungsten filament in order to get thermal decompound and DC bias in order to vertically grow to general Inductively Coupled Plasma CVD. The grown CNTs by ICPHFCVD were developed to higher graphitization and fewer field emission properties than those by general ICPCVD. In this system, DC bias was effect of vortical alignment to growing CNTs. The measured turn-on fields of field emission property by general ICPCVD and DC bias-assisted ICPHFCVD were 5 V/${\mu}{\textrm}{m}$ and 3 V/${\mu}{\textrm}{m}$, respectively.

• 조명전기설비학회논문지
• /
• 제24권6호
• /
• pp.35-42
• /
• 2010

본 논문에서는 등각사상 방법(conformal mapping method)을 사용하여 도체로 보강된 결합 도파 선로(conductor-backed coupled coplanar waveguide)의 정전기장 분포와 전위 분포를 계산하는 해석적인 수식을 유도하였다. 그리고 유도한 수식을 사용하여 결합 도파 선로 구조 전체에 분포하는 정전기장과 전위분포를 계산하고 이를 분석하였다. 논문에서 사용한 방법은 반복계산 과정을 필요로 하지 않으므로 이를 사용하면 전파해석방법(full-wave analysis method)보다 전기장분포를 빠르고 간편하게 계산할 수 있다. 이 방법은 결합기, 필터, 마이크로스트립 안테나와 같은 결합선로를 사용한 마이크로파집적회로의 분석에 폭넓게 응용될 수 있다.