• 대한전자공학회논문지
• /
• 제24권5호
• /
• pp.747-752
• /
• 1987

Analysis and design procedures for both symmetrical and non-symmetrical open-circuited interdigital multiple coupled microstrip line structures for applications as wide-band DC blocks/filters have been presented. The design equations, as is the case of other microstrip structures, are based on a simplified TEM model. The experimental results are in good agreement with the theoretically predicted ones.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권1호
• /
• pp.17-19
• /
• 2006

This paper presents the design of an electromagnetic system such as jumping ring system, and also considers the characteristics of dynamics for system with initial parameter. For the propose of system analysis, the MATLAB tool is to solve coupled differential equations with inductances and mutual inductance. To apply a real electromagnetic system, this paper implements the jumping ring system using design parameters, and analyzes the jumping ring system with proposal step.

• 전자공학회논문지D
• /
• 제34D권10호
• /
• pp.24-31
• /
• 1997

A new design method of stable RF power amplifier using 3dB coupled line is proposed in this thiesis. The proposed method of broadband matching consist of resistive matching circuits at low frequency and lossless matching circuits at microwave band. This design method increase the stability of an amplifier and is suitable for interstage matching. When high power amplifier is designed using this method for PCS base transceiver station, the measured resutls show thst the gain of 18.5dB, and 9W (39.5dBm) output power. We use motorola's MRF6401 for medium power and MRF 6402 for large power and cascaded them.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1002-1006
• /
• 2015

In this paper, design and analysis of permanent magnet synchronous generator for ocean thermal energy conversion (OTEC) considering magnetically coupled turbine-rotor system is discussed. In particular, the rotor dynamics considering bearing span and journal shaft diameter is highlighted. The two topologies of permanent magnet synchronous generator with magnetic coupling are employed for comparison of computed rotor dynamics and generating characteristics. The analysis results show that the critical speed of the turbine-rotor system is higher when the rotor is coupled by magnetically coupling. Finally, the experimental results confirmed the validity of the proposed design and analysis scheme and successful development.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권11호
• /
• pp.577-582
• /
• 2004

In this paper, lumped equivalent circuits for a conventional parallel directional coupler are proposed. This equivalent circuits only have self inductance and self capacitance, so we can design exact lumped equivalent circuit. The equivalent circuit and design formula for the presented lumped element coupler is derived based on the even- and odd-mode properties of parallel-coupled line. By using the derived design formula, we have designed the 3dB and 4.7dB MMIC couplers at the center frequency of 3.4GHz and 5.6GHz respectively. Measurements for the designed MMIC directional couplers show at 4dB and 5.2dB-coupling value at the center frequency of 3.4GHz and 5.6GHz. Excellent agreements between simulation results and measurement results on the designed directional couplers show the validity of this paper

• Journal of electromagnetic engineering and science
• /
• 제15권1호
• /
• pp.31-36
• /
• 2015

The design of a new compact band-pass filter is proposed, which is based on the microstrip composite right- and left-handed transmission- line (CRLH-TL) structure. Particularly, the interdigital coupled (IDC) lines of the CRLH geometry are proposed to be parted by inserting open stubs to meet the specifications on the passband. In addition, there is another pair of stubs to complete the design in a limited space. These are considered in the TL-based analysis and the design parameters are calculated by genetic algorithm optimization. The measurement is shown to be acceptable and agreeable with the circuit and electromagnetic field simulations. In addition, the zerothorder resonance (ZOR) phenomenon is verified.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.470-478
• /
• 2019

Because the global positioning system (GPS) is not available in underwater environments, an inertial navigation system (INS)/doppler velocity log (DVL) integrated navigation system is generally implemented. In general, an INS/DVL integrated system adopts a loosely coupled method. However, in this loosely coupled method, although the measurement equation for the filter design is simple, the velocity of the body frame cannot be accurately measured if even one of the DVL transducer signals is not received. In contrast, even if only one or two velocities are measured by the DVL transducers, the tightly coupled method can utilize them as measurements and suppress the error increase of the INS. In this paper, a filter was designed to regenerate the measurements of failed transducers by taking advantage of the tightly coupled method. The regenerated measurements were the normal DVL transducer measurements and the estimated velocity in RPM. In order to effectively estimate the velocity in RPM, a filter was designed considering the effects of the tide. The proposed filter does not switch all of the measurements to RPM if the DVL transducer fails, but only switches information from the failed transducer. In this case, the filter has the advantage of being able to be used as a measurement while continuously estimating the RPM error state. A Monte Carlo simulation was used to determine the performance of the proposed filters, and the scope of the analysis was shown by the standard deviation ($1{\sigma}$, 68%). Finally, the performance of the proposed filter was verified by comparison with the conventional tightly coupled method.

• International Journal of Fluid Machinery and Systems
• /
• 제2권3호
• /
• pp.197-205
• /
• 2009

Since large-scale commercial wind turbine generator systems such as MW-class wind turbines are becoming widely operated, the vibration and distortion of the blade are becoming larger and larger. Therefore the soft structure design instead of the solid-design is one of the important concepts to reduce the structural load and the cost of the wind turbine rotors. The objectives of the study are development of the fluid-structure coupled analysis code and evaluation of soft rotor-blade design to reduce the unsteady structural blade load. In this paper, fluid-structure coupled analysis for the HAWT rotor blade is performed by free wake panel method coupled with hinge-spring blade model for the flapwise blade motion. In the model, the continuous deflection of the rotor blade is represented by flapping angle of the hinge with one degree of freedom. The calculation results are evaluated by comparison with the database of the NREL unsteady aerodynamic experiment. In the analysis the unsteady flapwise moments in yawed inflow conditions are compared for the blades with different flapwise eigen frequencies.

• 한국전자파학회논문지
• /
• 제9권2호
• /
• pp.253-264
• /
• 1998

이중충 마이크로스트립 선로를 이용하여 기존의 edge-coupled 커플러가 가질 수 없는 임의의 큰 결합도와 광 대역 특성을 갖는 broadside-coupled 하이브리드 커플러의 설계방볍을 제안하였다. 설계에 필요한 물리적 치수 들은 커플러의 특성 파라메터들을 variational method의 한 방볍인 최소자승볍 (least squares residual method)과 eigenvalue 문제 해석법을 이용한 수치해석 방볍을 통하여 구하였으며, 커플러의 구조와 차원에 따 른 이론적인 계산값을 보이고 결합비 -3[dB], 중심주파수 1 GHz로 제작한 실측치와의 비교를 통해 제시된 설 계방법의 타당성을 입증하였다.

• 한국전자파학회논문지
• /
• 제9권3호
• /
• pp.399-409
• /
• 1998

본 논문에서는 CATV 시스템용 약결합형 신호분기기에 대한 광대역 설계이론을 설명하고, 전송선로의 임피던스 정합법을 제안하였다. 위의 이론과 방법에 의해 제작된 약결합형 신호분기기는 종래의 약결합형 신호분기기에 비해 주파수특성이 매우 향상되었다. 따라서, 약결합형 신호분기기의 대역폭은 5-2000 MHz로 확대되었다. 또한, 실제 회로에서 변성기를 구성하는 코일의 권선수는 정수가 아니라 0.9, 1. 1.9, 2, 2.9 등임을 밝혔다. 나아 가서, 실제로 제작된 약결합형 신호분기기의 주파수 특성이 이론치와 잘 일치함을 보임으로써, 제안한 설계이론 및 전송선로의 임피던스 정합법의 타당성이 입증되었다.