• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권4호
• /
• pp.252-259
• /
• 2012

Purpose: This study evaluated the postoperative stability of counter clockwise rotation of the mandibular plane in anterior openbite patients, who have had one jaw surgery performed. Methods: This study includes patients with skeletal class III malocclusion accompanied by anterior openbite among the patients who have had BSSRO performed, resulting in counter clockwise rotation of the mandibule. We excluded the patients with genioplasty and segmental surgery, and included 23 patients who underwent BSSRO. Results: We found no statistical significance between the amount of counter clockwise rotation in the mandible in the Pearson correlation test. Also, there was no significant difference between Group 1 (< $3^{\circ}$) and Group 2 (> $3^{\circ}$). Conclusion: This study evaluated the amount of horizontal relapse, and the degree of relapse. Stable results were obtained. Although there was no statistical significance between the degree of openbite and the amount of horizontal relapse, the group with a greater amount of openbite had a greater amount of relapse.

• 대한인간공학회지
• /
• 제22권4호
• /
• pp.47-57
• /
• 2003

This study investigated the recruitment patterns of ten trunk muscles in isometric exertion tasks, focused on the functional roles (agonist or antagonist). Twelve male students performed maximum voluntary isometric exertion tasks towards six directions: flexion/extension, left/right lateral bending, and clockwise/counter-clockwise twisting. EMG signals from ten trunk muscles and exertion forces were collected. Normalized EMG (NEMG) values were calculated at 10, 20, 30, 40, 50, 60, 70, 80, and 90 %MVC. The subjects showed a limited capacity in producing twisting moments, approximately 50% of the extension moment, and 70% of lateral bending moments. EMG activity was dependent on the direction and magnitude of the exertion, and also on the functional role. The mean NEMG of agonist was 0.260 and 0.067 for antagonist. Agonists showed the highest mean NEMG in flexion (0.367), while antagonists showed the highest mean NEMG in twisting clockwise/counter-clockwise (0.090/0.106).

• 대한인간공학회지
• /
• 제35권5호
• /
• pp.413-423
• /
• 2016

Objective:The aims of this study are to understand the effects of task (pushing, pulling, and clockwise and counter clockwise twisting) direction on the maximal output and their grip forces and to explore the relationship between the maximal output and the grip forces. Background: Knowing the normative maximal grip force is not enough to design a good hand tool. The industrial designers should understand the required grip forces in various motions toward a specific direction to make an effective and efficient hand tool. Method: Eighteen healthy volunteers participated in the series of isometric maximal output force tests. A custom-made force measuring equipment collected the output and the grip forces for three seconds. Force measurements along the vertical, coronal and sagittal axes were randomly repeated three times. Results: The pulling was strongest and the pushing was weakest in all directions. The effect of motion on the output forces varied in different directions. The corresponding grip force increased in the order of pushing, pulling, clockwise twisting, and counter clockwise twisting in all directions. The maximal output and their grip forces were highly correlated but the relationship was affected by motion and direction. The regression coefficient was greatest in pulling and smallest in clockwise twisting. Conclusion: The effect of motion on the output forces varied in different directions. The maximal output and their grip forces were correlated but the relationship was affected by motion and direction. Application: Findings of this study can be valuable information for industrial designers to develop more productive hand tools and work stations to help preventing the musculoskeletal disorders at work.

• Bulletin of the Korean Chemical Society
• /
• 제23권12호
• /
• pp.1737-1743
• /
• 2002

We have studied the dynamics of energy-rich hydrogen molecules produced on a graphite surface through H(g) + H(ad)/C(gr) → $H_2$ + C(gr) at thermal conditions mimicking the interstellar medium using a classical trajectory procedure. The recombination reaction of gaseous H atom at 100 K and the adsorbed H atom on the interstellar graphite grains at 10 K efficiently takes place on a subpicosecond time scale with most of the reaction exothermicity depositing in the product vibration, which leads to a strong vibrational population inversion. The molecules produced in nearly end-on geometry where H(g) is positioned below H(ad) rotate clockwise and are more highly rotationally excited. but in low-lying vibrational levels. The rotational axis of most of the molecule rotating clockwise is tilted from the surface normal by more than 30°, the intensity peaking at 35°. The molecules produced when H(ad) is close to the surface rotate counter-clockwise and are weakly rotationally excited, but highly vibrationally excited. These molecules tend to align their rotational axes parallel to the surface. The number of molecules rotating clockwise is eight times larger than that rotating counter-clockwise.

• 한국자기학회지
• /
• 제10권4호
• /
• pp.178-182
• /
• 2000

본연구에서는 서로 직교하는 yoke 장치와 4-채널 과도기록장치를 사용하여 회전하는 자기장을 발생시키고, 회전자화에 의한 자기적 손실을 측정할 수 있는 측정시스템을 구성하였다. 개발된 측정장치를 사용하여 무방향규소강의 회전자화에 의한 자기적특성을 측정하였으며, 회전자화에 의한 손실의 측정에서 자기유도성분의 측정방향과 자화력성분의 측정방향이 일치하지 않아, 시계방향 및 반시계방향으로 측정한 값이 차이를 나타내었다. 그러나 시계방향 및 반시계방향으로 측정한 회전자화에 의한 손실값의 평균은 일정함을 알 수 있었으며, 이를 이용할 경우 회전자화의 폭정오차를 줄일 수 있었다.

• 대한치과교정학회지
• /
• 제26권5호
• /
• pp.601-611
• /
• 1996

교정치료에 있어서 악안면 성장의 양상은 진단과 치료계획 수립에 있어서 매우 유용한 자료이며 교합의 달성 및 안모의 형태, 발육에 많은 영향을 미친다. 따라서 성장유형의 분류에 대한 많은 연구가 있었으며 성장예측을 위한 많은 시도가 있었다. 이에 본 연구에서는 성인 120명을 대상으로 치료전 측모두부계측 방사선사진을 이용하여 전안면고경에 대한 후안면고경의 비를 측정하여 $56\%-62\%$는 시계방향 성장군(36명), $65\%-80\%$는 반시계방향 성장군(43명)으로, 그리고 $62\%-65\%$는 정상군(41명)으로 분류하고 이에 따른 하악이부의 형태와 돌출정도 평가를 시행한 결과 다음과 같은 결과를 얻었다. 1. 남녀 하악이부 형태비교에 있어서는 남자가 여자보다 이부의 높이와 돌출정도가 크게 나타났다. 2. 시계방향 성장군이 반시계방향 성장군에 비해 하악이부의 Height, H/D ratio, Actual length는 크게 나타났고, Depth, Angle, effective length, E/A ratio는 작은 값을 나타냈다. 3. 악안면 성장양상에 있어 이부의 돌출정도가 작을수록 시계방향성장 경향을 나타내며, 돌출정도가 클수록 반시계방향성장 경향을 나타냈다.

• 한국가시화정보학회지
• /
• 제11권1호
• /
• pp.28-33
• /
• 2013

This paper describes aerodynamic characteristics of an Archimedes spiral wind turbine with various angles of attack. The range of angles was controlled from $-30^{\circ}$ (clockwise) to $+30^{\circ}$ (clockwise). The rotating speed of wind turbine at the same angle of attack in both directions was different. The reason why the-maximum rotational speed was observed at $15^{\circ}$ in clockwise direction can be explained based on angular momentum conservation. Quantitative flow visualization around Archimedes wind turbine blade was carried out between $-15^{\circ}$ (clockwise) and $+15^{\circ}$ (counter clockwise) using high resolution PIV method. The relationship between drag force and rotating speeds was discussed. From these results, optimum design on yawing system of Archimedes spiral wind turbine may provide high efficiency on small wind power system.

• 패션비즈니스
• /
• 제16권1호
• /
• pp.69-82
• /
• 2012

This thesis aimed to reduce the differences of hair color when hair coloring, so it researched the differences & changes in hair color before shampoo v.s. after shampoo and dry on different heat processes when acid hair color dyeing. Five hair color dyes (Y, R, B, G, Br) manufactured by two different corporations were used. The acid hair color dyes were tinted on black and bleached hair pieces subjected to 3 different heat process; 1. Normal Temperature($25^{\circ}C$, 30min.) / 2. Heating($40^{\circ}C$, 15min.)+Normal Temperature($25^{\circ}C$, 15min.) / 3. Heating($40^{\circ}C$, 30min.). Color numbers were divided by NCS value, chroma, and hue. Statistical averages were derived and t-test was conducted using SPSS V12. Hair color differences and changes were drawn on an NCS chart using Photo Shop PS. The conclu is; If acid hair colorings are separated by a heating process, hair value & chroma change before shampoo vs. after shampoo & dry regardless of the color of hair and the heat process. Hue is not changed or shifted counter clockwise NCS color circle, but some exceptions, and it's the same when the total heat process results are combined. Black hair's value shifted downward and chroma left, and hue stayed either neutral or one color or it shifted counter clockwise on NCS color circle. Bleached hair's value shifted upward and chroma right, and hue stayed one color or shifted counter clockwise, but some exceptions. And it can be shown on NCS chart.

• 산업공학
• /
• 제17권1호
• /
• pp.104-112
• /
• 2004

The purposes of the study were twofold: to investigate the stereotype of position and direction that the users expect when operating the handles of a water faucet in different directions, and to collect information about user’s preferred directions. Six hundred subjects, aged from teens to over sixties, participated in the experiment with the procedure of showing them actual water faucets of a lever-type handle and two round-shaped handles mounted on the sink(horizontal plane) and wall(vertical plane). The water faucets presented to the subjects were most widely used devices in our living environment. The results showed that when the handle of the lever-type water faucet was in the 'up' position, 63% of the subjects expected the device was 'open'. When the cold hot separated water faucets were mounted on the horizontal or vertical plane, over 50% of those who answered the 'open' direction of round type handles responded as 'counter clockwise' for a 'hot' water faucet and 'clockwise' for a 'cold' water faucet. In conclusion, this study suggests that water faucet devices be designed and installed in the way that the users expect them to operate.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권7호
• /
• pp.729-736
• /
• 2013

The turbulent properties in a mixed statistically stationary flow were investigated experimentally by a pseudo stereoscopic PIV. In order to validate the experimental results, the profiles of the turbulent kinetic energy were evaluated with the flow features. A mechanical agitator having 6 blades was installed at the bottom of the mixing tank (D=60cm, H=60cm). The agitator was rotated with 80rpm clockwise and counter-clockwise. For the measurements, three cameras were used and all were synchronized. The images captured by one of the three cameras was used for the measurement of rotational speed, and the images captured by the other two cameras were used to measure three dimensional components of velocity vectors. All vectors captured at the same rotational angle were phase averaged to construct three-dimensional vector fields to reconstruct the spatial distribution of the flow properties. It was seen that the jet scrolling along the tank was the main source of mixing.