• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.49-58
• /
• 2006

The purpose of this study was to examine the effect of covering yarn's twist on mechanical properties of knitted fabrics of composite yarns with single covering process. Four yarns that were used in this study: two different composite yarns made from the four kinds of cotton and functional polyester-(Poly-A) with the ratio of 52:48, and the rest two yarns are the original cotton 100% yarn and the poly-A 100% yarn. The two kinds of composite yarns, CP1 and CP2, were processed on the single covering process. CP1 was applied on the single covering process with S-800 tpm, where Poly-A was used as covering yarn and cotton was used as core yarn. CP2 was applied on the same process as CP1 except that Poly-A had been applied on the two-for-one twisting process with S-400 tpm on the previous step. Sixteen mechanical properties of all the four knifed fabrics knitted under the same knitting conditions were measured by KES-FB system with the outer knit condition. And 3D CAD dressmaking simulations, which were driven by some of the mechanical properties, were presented. The results were as follows: CP2 had high RT values with twisting of covering yarn. CP2 also had high B, 2HB values because of higher linear density. SMD was affected rather by twisting of covering yarn than by fine hair of the cotton surface. Twisting of covering yarn made it decreasing T value and increasing W value. Dressmaking 3D CAD simulations showed that there are buckling effects on CP2 because of high bending rigidity and shear rigidity.

• 한국의류학회지
• /
• 제30권2호
• /
• pp.275-285
• /
• 2006

The purpose of this study was to examine the change of dyeing ability by K/S values, when dyed in different twisting processes and by one bath system and two bath system, to find possible ways of minimizing the color difference between cotton and polyester in composite yarn. The two types of composite yarn, which had one setting process(CP1) and two setting processes(CP2) were dyed with reactive/disperse dyes in both one bath dyeing system and two bath system. The dyeing ability according to the two different twisting processes was measured, and the values of the CP1 were higher compare to the values of CP2 in both one and two bath dyeing systems. This is because CP1 applied only one setting could shrink dyeing process at 130$^{circ}C$. This shrinkage increased the number of twists in the unit length and increased the yarn density, and this is the reason that the K/S values were measured higher than those of CP2. In wet shrinkage test, in opposition to CP2 only had 0.76$\%$ of the shrinkage rate, CP1 had 3.00$\%$ of the shrinkage rate. Also, the dyeing ability according to the two different dyeing methods was measured, and the values of CP1 and CP2 were both higher when dyed in two bath system. On the other hand, the color differences between cotton and polyester in composite yarns, were smaller for CP2 than that for CP1 and were also smaller in two bath dyeing system than in one bath dyeing system. Therefore, the ways of minimizing color difference between cotton and polyester in composite yarn are to apply enough setting in order to minimize shrinkage in dyeing process and to choose two bath dyeing system.

• 한국염색가공학회지
• /
• 제34권2호
• /
• pp.109-116
• /
• 2022

Tire codes are made of materials such as hemp, cotton, rayon, nylon, steel, polyester, glass, and aramid are fiber reinforcement materials that go inside rubber to increase durability, driveability, and stability of vehicle tires. The reinforcement of the tire cord may construct a composite material using tires such as automobiles, trucks, aircraft, bicycles, and fibrous materials such as electric belts and hoses as reinforcement materials. Therefore, it is essential to ensure that the adhesive force between the rubber and the reinforced fiber exhibits the desired physical properties in the rubber composite material made of a rubber matrix with reinforced fibers. This study is a study on the heat treatment conditions for improving the adhesion strength of the tire cord and the reinforced fiber for tires. The core technology of the drying process is a uniform drying technology, which has a great influence on the quality of the reinforcement. Therefore, the uniform airflow distribution is determined by the geometry and operating conditions of the dryer. Therefore, this study carried out a numerical analysis of the shape of a drying nozzle for improving the performance of hot air drying in a dryer used for drying the coated reinforced fibers. In addition, the flow characteristics were examined through numerical analysis of the study on the change in the shape of the chamber affecting drying.