• Journal of Magnetics
• /
• v.2 no.1
• /
• pp.7-11
• /
• 1997

The dependence of magnetoresistance (MR) ratio on various variables like the thickness of the second Co layer, on the presence of cap layer, on deposition field (Hdep) and on annealing in Co/Cu/Co sandwiches was investigated. Spin-valve sandwiches were deposited on the corning glass by means of the 3-gun dcmagnetron sputtering at a 5 mTorr partial Ar pressure and room temperature. The deposition field was varied from 70 Oe to 720 Oe. The MR curve was measured by the four-terminal method with applied magnetic field up to 1000 Oe perpendicular to the direction of a current in the film plne. The MR ratio of glass/Fe(50${\AA}$)/Co(17${\AA}$)/Cu(24${\AA}$)/Cot(${\AA}$) fabricated by making 50 ${\AA}$ of Fe buffer layer has the maximum value of 8.2% when the thickness of the second Co layer was 17${\AA}$and the deposition field was 350 Oe. In the case of glass/Fe(50${\AA}$)/Co(17${\AA}$)/Cu(24${\AA}$)/Cot(${\AA}$) with Cu cap layer on top, the decrease in the MR ratio seemed to relate with the oxidation of the second Co layer. Samples prepared with deposition field showed greater MR ratios through the formation of more complete spin valve films. After annealing for 2 hours at 300$^{\circ}C$, the MR ratio of the samples prepared with deposition field decreased rapidly while the MR raito of the sample prepared without the field remained.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.4
• /
• pp.273-281
• /
• 2005

The weight of spectacles fined on is resolved into its components along the nose's slide plane and the normal to the nose plane where the nosepad is located. The equation and its numerical solution to determine the component force was derived as a function of splay angle ${\Psi}$, $sin{\Psi}$, $cos{\Psi}$, and $cot{\Psi}$, incorporated with ${\theta}$ and ${\Phi}$, the angles viewed from side and front of the face, respectively. Values of inclination angle ${\theta}$ and ${\Phi}$ could be obtained to fulfill the condition where the frictional force between the nose and pad is either greater than the normal pressure exerted by the spectacles on the nose. With the value of ${\theta}$ fixed the normal pressure increases as ${\Phi}$ increases. With ${\Phi}$ fixed, the effect of ${\theta}$ is the same.

• Atmosphere
• /
• v.25 no.1
• /
• pp.117-127
• /
• 2015

The presences of clouds significantly influence the accuracy of ozone retrievals from satellite measurements. This study focuses on the influence of clouds on Ozone Monitoring instrument (OMI) ozone profile retrieval based on an optimal estimation. There are two operational OMI cloud products; OMCLDO2, based on absorption in $O_2-O_2$ at 477 nm, and OMCLDRR, based on filling in Fraunhofer lines by rotational Raman scattering (RRS) at 350 nm. Firstly, we characterize differences between $O_2-O_2$ and RRS effective cloud pressures using MODIS cloud optical thickness (COT), and then compare ozone profile retrievals with different cloud input data. $O_2-O_2$ cloud pressures are significantly smaller than RRS by ~200 hPa in thin clouds, which corresponds to either low COT or cloud fraction (CF). On the other hand, the effect of Optical centroid pressure (OCP) on ozone retrievals becomes significant at high CF. Tropospheric ozone retrievals could differ by up to ${\pm}10$ DU with the different cloud inputs. The layer column ozone below 300 hPa shows the cloud-induced ozone retrieval error of more than 20%. Finally, OMI total ozone is validated with respect to Brewer ground-based total ozone. A better agreement is observed when $O_2-O_2$ cloud data are used in OMI ozone profile retrieval algorithm. This is distinctly observed at low OCP and high CF.

• Journal of the Korean Society of Food Culture
• /
• v.14 no.2
• /
• pp.67-81
• /
• 1999

The present study was surveyed for the normal meal and particular folk meal in east cot area in Kyungpook province, Pohang, Youngduk, and Uljin areas. The results are as below: Most subjects for surveying were 30-40 years old and permanent residents in those areas. For the normal meal, the boiled rice was the top main dishes among 18 main dishes. The folloing upper five main dishes were boiled bean rice, boiled barley rice, boiled miscellaneous cereals rice, noodles, and Bbimbab (miced rice with cooked various vegetables and meats). Less frequent main dishes were raw fish Bbimbab and the various fish soups etc. The two upper side dishes, out of 17 surveyed ones, were kimchi and soybean paste soup. Twelve dishes(about 70%) out of 17 side dishes, the loach soup, the marinated and fermented raw fishes (fish Sikhae'), the baked mackerel, the pickled fishes, the friedsardine, the green seaweed, and the quid, etc. were made from the sea products. For the particular folk meal, about 30 kinds of the specific folk food items of this area were surveyed: Gudungchi' Sikhae', which was made with seaweed, out of the 11 kinds of fish Sikhae', raw fish(Whae') in water, Sigumjang', a salty agar, a steamed seaweed which was covered with the flour or bean power the various kinds of fish soups, the various kinds of fish stews were the particular folk side dishes in these areas. The dietary habit in these east coast areas were affected by the various sea food products, the fishes and the seaweeds, which were acquired easily through four season in these area.

• Journal of Aquaculture
• /
• v.13 no.3
• /
• pp.231-238
• /
• 2000

Growth, feed efficiency and condition factor of the olive flounder fed supplemented diets containing different levels of Obosan were significantly (P<0.05), especialluy at the optimum level of 0.6% Obosan. The hematological values (RBC count, hemoglobin, hematocrit, MCHC, MCV and MCH) were not significantly different among the flounder fed diets containing different levels of Obosan (P> 0.05). However, serum concentrations of total protein and glucose in the flounder, feds Obosan supplemented diets, were significantly higher, while the levels of total cholesterol, COT and GPT were lower than those of control fish (P<0.05)i the values for COT and GPT were only about half that of the control (P<0.05).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.389-394
• /
• 2017

In a conventional ship structure, stiffeners with an asymmetric section, such as inverted angles, are used widely despite the disadvantage of strength compared to the stiffeners with a symmetric section, such as a built-up T. On the other hand, T-type built-up members are attracting more attention than L-type inverted angles due to the increased size of ships. The purpose of this study was to develop an optimal design program for a built-up T, and apply an evolution strategy as an optimization technique. In the optimization process, the gross thickness concept was adopted for the design variables and objective function, and the constraints are set up based on HCSR (Harmonized Common Structural Rules). Using the developed program in this study, the optimal stiffener design was carried out for 300K VLCC and 158K COT of which the orders were obtained lately. The optimal results revealed the weight reduction effect of 144 tons and 60 tons, respectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.397-404
• /
• 2010

Laboratory tests of wave overtopping rates for a rubble mound breakwaters armoured Tetrapod were carried out, with varying design waves, crest berm widths and crest freeboards. The objective of this study is to investigate overtopping performance and to examine the characteristics of the widely used overtopping prediction models through the results of laboratory tests. Laboratory tests show that structure slope and wave periods have a considerable influence on overtopping rates, but the difference of overtopping rates related to crest berm widths is slight. Owen(1980)'s prediction considerably overestimates compared to the measured valued. Prediction of Van der Meer et al.(1998) underestimates only for steep slope($cot{\alpha}$=1.5). Besley(1999)'s and Pedersen(1996)'s predictions have a relatively good agreement with the measured results for slopes with a broader crest berm width. In general, best agreement between measured and predicted overtopping rates is observed using modified Pedersen(1996)'s formula for all test conditions.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.1
• /
• pp.15-21
• /
• 2013

We previously observed that Bacillus subtilis spores from sspE mutants presented a lower germination capacity in media containing high salt concentrations (0.9M NaCl). This deficiency was attributed to the absence of SASP-E (gamma-type small-acid-soluble protein), rich in osmocompatible amino acids released by degradation. Herein we observed that, in addition, this mutant spore presented a reduced capacity to use L-alanine as germinant (L-ala pathway), required longer times to germinate in calcium dipicolinate ($Ca^{2+}$-DPA), but germinated well in asparagine, glucose, fructose, and potassium chloride (AGFK pathway). Moreover, mild sonic treatment of mutant spores partially recovered their germination capacity in L-ala. Spore qualities were also altered, since sporulating colonies from the sspE mutant showed a pale brownish color, a higher adherence to agar plates, and lower autofluorescence, properties related to their spore coat content. Furthermore, biochemical analysis showed a reduced partition in hexadecane and a higher content of $Ca^{2+}$-DPA when compared with its isogenic wild-type control. Coat protein preparations showed a different electrophoretic pattern, in particular when detected with antibodies against CotG and CotE. The complementation with a wild-type sspE gene in a plasmid allowed for recovering the wild-type coat phenotype. This is the first report of a direct involvement of SASP-E in the spore coat assembly during the differentiation program of sporulation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.6
• /
• pp.27-35
• /
• 2005

While the current world wide network offers an incredibly rich base of information, it causes network management problem because users should have many independent IDs and passwords for accessing different sewers located in many places. In order to solve this problem users have employed single circle of trust(COT) ID management system, but it is still not sufficient for clearing the problem because the coming ubiquitous network computing environment will be integrated and complex networks combined with wired and wireless network devices. The purpose of this paper is to describe the employment and evaluation of federated ID interoperability method for solving the problem. The use of the proposed model can be a solution for solving network management problem in the age of mobile computing environment as well as wired network computing environment.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.1 s.68
• /
• pp.16-19
• /
• 2006

With the fast growth of the shipbuilding industry, the number of lifting lugs used every year has reached onehundred. This paper is aimed at examining the cause of cracking in the hopper top plate, due to block lifting. First of all, we have investigated the fracture surface in the occurrence position of the crack of the hopper top plate, using the scanning electron microscope. In this study, we have evaluated the structural strength for COT super block under present lifting conditions. For this purpose, the equivalent stresses have been calculated by linear elastic analysis, using the finite element program ABAQUS.