• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.505-510
• /
• 2011

The railroad freight transport has great merits that can transport mass and specific items(dangerous goods), but it takes a long time because of low accessibility to the logistics facility and the complex process of loading freight in middle station. This paper analyzed volumes and characters of each railroad freight item, and was carried out the effect of applying E&S system to Gyeongbu line containers to find the method of reducing transport time and effective container transportation. As a result of Cost-Effectiveness analysis, the block train(B/T) is reducing transport time more about 1~2 hours. The road congestion cost is saving about 2.2 billion won. And due to skipping work of organizing train, personnel and equipment expenses savings expected about 9 billion won. It is expected that the E&S system enhances the container transport service and has an effect positive influence on making a efficient method of transport. But It is necessary to estimate pre-feasibility of applying E&S system that the standard of estimating cost and benefit is required further examination.

• Journal of Korean Academy of Nursing
• /
• v.46 no.4
• /
• pp.562-571
• /
• 2016

Purpose: In this study the costs and benefits of a home health care program were examined to evaluate the economic feasibility of the program. Methods: The study participants included 349 patients in the community who had been registered at a home health care center for 5 years. The costs and benefits of the program were analyzed using performance data and health data. The benefits were classified as the effects of pressure ulcer care, skin wound care and catheters management. The program effect was evaluated on the change of progress using transition probability. Benefits were divided into direct benefit such as the savings in medical costs and transportation costs, and indirect benefits which included saving in productivity loss and lost future income. Results: Participants had an average of 1.82 health problems. The input cost was KRW 36.8~153.3 million, the benefit was KRW 95.4~279.7 million. Direct benefits accounted for 53.4%~81.2%, and was higher than indirect benefits. The net benefit was greater than 0 from 2006 to 2009, and then dropped below 0 in 2010. Conclusion: The average net benefit during 5 years was over 0 and the benefit cost ratoi was over 1.00, indicating that the home health care program si economical.

• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.137-149
• /
• 2013

PURPOSES: This study is to suggest the Contribution of Road Capital in Industry and Optimal Level of Road Investment in South Korea METHODS: Based on the literature review, This research is empirically estimated using disaggregate and disaggregated data composed of 10-sectors covering the entire korea economy for the period 1970~2000. The relevant policy questions addressed in this report are : cost reduction and Scale elasticities of road, effect of road capital stock on demand for labor, capital and materials, marginal effect of road, industry TFP growth decomposition, Net Social Rates of Returns, optimal of road capital. RESULTS : The marginal benefits of the road capital at the industry level were calculated using the estimated cost elasticities. Demand for the road capital services varies across industries as do the marginal effects. The marginal benefits are positive for the principal industries. This suggests that for these industries the existing stock of road capital may be under supplied. CONCLUSIONS: This results emerges is that the ratio of the optimum to actual road capital, measured by road, was high at beginning of the period 1970s and declined 1990s. There appears to be evidence of under-investment in road capital. That is continuous and premeditated investment for road which lead to saving time and finance.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.2
• /
• pp.105-109
• /
• 1994

This experiment was conducted to know the labor saving effect and reducing production cost by agricultural mechanization in the cultivation of Bupleurum falcatum. Labor reducing effects of the drilling seeder by hand and the machine attached to two wheel tiller were 97%, but emergency rate was highest in the former. Dry root yield per plant was increased by low amount of seed sowing but that yield per unit area was increased at much seeding amount in the seeder attached to the tiller. The drilling seeder by hand was showed highest standing ratio of seedling and produced yield to 84.1kg of root yield per 10a. Labor saving effect was the best at the multipurposes mechanized harvester and labor saving and famer's income ratio were increased to 69% and 50% respectively. Labor time and cost were reduced to 74% and 69% respectively by mechanization of sowing and harvest cultivation practice on Bupleurum falcatum.

• Korean Journal of Artificial Intelligence
• /
• v.6 no.1
• /
• pp.1-10
• /
• 2018

Compressed Air is an important energy source used in most factories nowadays. The automation trend using air compressor has been gradually increasing with the interest of the 4th industry in recent years. With the air compressor system, it is possible to construct the device at low cost and easily achieve automation and energy saving. In addition, With trend of FA, miniaturation and light weight manufacturing trend expand their use in the electronics, medical, and food sectors. Research method is to design the technology for the remote control of the following information as USN base. Development of flexible sensing module from real time observation module for fusion of IT technology in compressed air systems, design and manufacture of flexible sensing module, and realiability assessment. Design of real-time integrated management system for observation data of compressed air system - Ability to process observation data measured in real time into pre-processing and analysis data. This study expects unconventionally decreasing effect of energy cost that takes up 60~70% of air compressor layout and operation and maintenance management cost through USN(Ubiquitous Sensor Network) technology by using optimum operational condition from real time observation module. In addition, by preventing maintenance cost from malfunction of air compressor beforehand, maintenance cost is anticipated to cut back.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.11
• /
• pp.81-87
• /
• 2018

Among various types of geothermal heat pump systems, Vertical Closed-Loop Geothermal Heat Pump (VGSHP) has received increasing attention due to a variety of advantages such as the potential to be installed in a relatively small space and improved energy efficiency. In this research, the performance of VGSHP system coupled with heat storage tank was evaluated, by analyzing operational behavior of heat storage tank, the variations of heat pump energy performance due to the connection with heat storage tank, part load ratios characteristics of heat pump and the corresponding energy cost, compared to chiller and boiler based conventional system. The results of this study showed that the VGSHP system coupled with heat storage tank showed an energy saving effect of about 18% for cooling and about 73% for heating, and annual heating/cooling energy cost reduction of 43,000,000 KRW ($ 39,000), compared to the conventional air conditioning system. In addition, after considering both energy cost and initial investment cost including equipment, installation and auxiliary device expenses, payback period of approximately 11.8 years was required.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.762-766
• /
• 2017

Energy recovery device (ERD) is used to save energy consumption in seawater reverse osmosis processes. However, small-scale ERDs (<$100m^3/d$) are hardly observed in seawater desalination market. In South Korea, most of seawater desalination plants for drinking water production are small-scaled and have been operated in island areas or on ships. Thus, the effect of ERDs for these small-scale SWRO processes should not be neglected. In this work, the small-scale SWRO processes are designed and analyzed in terms of energy consumption with/without ERD. The realistic efficiencies of high pressure pumps are considered for the energy analyses. The unit cost of electricity depending on the application place (e.g., inland and island areas, on ships) is investigated to calculate the energy cost for unit water production in various SWRO applications classified by plant capacity, application place, and the installation of ERD. As a result, the energy cost can be saved up to $1,640.4KRW/m^3$ when ERD is applied, and the saving effect increases at smaller plants on ships. In conclusion, the development of small-scale ERDs are necessary because small-scale SWRO processes are dominant in Korean seawater desalination market, and the electricity saving effect becomes higher at smaller-scaled system.

• International Journal of Aerospace System Engineering
• /
• v.10 no.2
• /
• pp.1-4
• /
• 2023

Even though the recent development trend of wind turbine systems has been focused on larger MW Classes, the small-scale wind turbine system has been continuously developed because it has some advantages due to easy personnel establishment and use with low cost and energy saving effect. This work is to propose a specific structural design and analysis procedure for development of a low noise 500W class small wind turbine system which will be applicable to relatively low wind speed region like Korea. The proposed structural feature has a skin-spar-foam sandwich composite structure with the E-glass/Epoxy face sheets and the Urethane foam core for lightness, structural stability, low manufacturing cost and easy manufacturing process. Moreover this type of structure has good behaviors for reduction of vibration and noise. Structural analysis including load cases, stress, deformation, buckling and vibration was performed using the Finite Element Method. In order to evaluate the designed blade structure the structural tests were done, and their test results were compared with the estimated results.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.1 s.45
• /
• pp.107-116
• /
• 1994

The United States adopted DRG based prospective payment system (PPS) in order to control the inflation of health care costs. No study used statistical test while many studies reported the cost containing effect of the PPS. To study impacts of the PPS on the Medicare expenditure, this study set the following three hypotheses (1) The PPS decelerated the increase in the hospital expenditure (Part A), (2) the PPS accelerated the increase in the expenditure of outpatients and physicians (Part B), (3) the increase in total expenditure was decelerated inspite of the spill over (substitution) effect because saving in the Part A expenditure were greater than losses in the Part B expenditure. The dependent variables are per capita hospital expenditure, per capita Part B expenditure, and per capita total expenditure for the Medicare beneficiaries. An intervention analysis, which added intervention effect to the time series variation on the Box-Jenkins model, was used. The observations included 120 months from 1978 to 1987. The results are as follows : (1) The annual increase in the per capita Part A expenditure was $5.11 after the implementation of DRG where as that before the PPS had been $11.1. The effect of the reduction ($5.99) was statistically significient (t=-3.9). (2) The spill over (substitution) effect existed because the annual increase in the per capita Part B expenditure was accelerated by $1.73 (t=1.91) after the implementation of the PPS. (3) The increase in the total Medicare expenditure per capita was reduced by $4.26 (t=-2.19) because the spill over effect was less than cost savings in the Part A expenditure.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.4
• /
• pp.400-403
• /
• 2011

This experiment was carried out to determine the effect of mechanization on lavor-saving in sweetpotato cultivation. The field experiment was conducted from 2005 to 2006 in Mokpo Experiment Station of the National Institute of Crop Science. In order to determine the efficiency of mechanical harvesting, different harvesting methods were compared. Mechanical harvesting method was done as follows: cutting of vines by machine, removal of plastic film mulching, and harvesting by two-row and one-row harvesting system. The result showed harvesting labor was decreased by 66.6% in two-row harvesting. The ratio of damaged sweetpotato by mechanical harvesting decreased by 49.4% in two-row and 38.4% in one-row harvesting compared to conventional method. The total labor cost was saved by 48.2% - 70.4% using mechanical method. In addition, the total income also increased by ca. 62.9% - 81.2%. Thus, it was concluded that mechanical harvesting is more efficient and economical method than conventional one.