• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.6
• /
• pp.475-484
• /
• 1990

This paper proposes a method for the implementation of a power line communication equipment using power line synchronization in a direct-sequence spread spectrum communication system. In order to implement a network using a power line as a transmission channel we have investigated the utilization of direct-sequence speread spctrum which gives such advantages as robustness against narrow-band interference and noise, and realization of multiple access. In a power line, however, complexity of synchronization makes it difficult to realize a multiple access and cost down and system simplification. The proposed technique of power line synchronization makes it possible to get cost down and system size small, and the realization of multiple communication can be achieved by the addition of address setting circuit.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.3
• /
• pp.1-18
• /
• 1997

From the beginning of 1990s , also in the shipping industry, especially liner shipping industry competition has been more intensive and difference of the service quality among shipping companies has been learned . On the other hand, a shipping company has some limitations to do its international mission for itself just by broadening service area. For this reason, the necessity for the global strategi alliance among the shipping companies, which is orginally aimed at sharing of facilities and organixation, has been developed. Through strategic alliance, liner shipping companies do not need to input the additional capitals to increase the material assets such as vessel capacity and spread the risk by the enlargement of the market. Also, they can secure the competitive edge through efficient utilizaton of assets. The purpose of strategic alliance of Hanjin Shipping Ltd., can be summarized as follows ; broadening of service area, cost reduction through vessel sharing, realization of rationalized shipping service by terminal and equipment or facilities sharing. Liner strategic alliances are agreement among liner companies to pol their equipment , andterminals for joint operations and services in which each alliance partner continues to serve its market using jointly operated or used inland feeders,inland terminals, port terminals, and mainline fleets of ship as well as joint pools of containers and equipment. Strategic alliances are generally more formal agreements than consortia and impose longer term and far reaching obligation on their members. It also acts as one in developing and advancing the strategic aims of the alliance members. The most important objective for liner strategic alliances is cost reduction and improvement in capital asset utilization. Main aims of strategic alliance drawn in this paper, can be enumerated follows : 1. improvements in service frequency and quality : 2. improvements in vessel and equipment utilization and thereby reductions in fixed and variable cost ; 3. improvements in market shares and high value cargo booking ; 4. reductions in intermodal storage and port terminal throughput costs ; 5. improvements in negotiating powers with ports and feeder transport providers ; 6. reduction in financial and other fixed costs such as insurance; 7. coordination and integration of MIS and EDI systems and service for greater efficiency and market penetration ; and, 8. improvements in logistic chain management and economic of scale by equipment depot, terminal, and vessel sharing.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.99-104
• /
• 2013

비용편익분석은 어떤 사업으로 인하여 자연배분의 변화가 생길 때 그에 따른 경제적 편익을 측정하게 되며 사업을 시행하여 생기는 편익과 비용을 비교하여 경제성을 평가하고 대안 중에서 우선순위를 결정할 때 유용하다. 따라서, 본 논문은 자본에 관한 투자기준을 마련하기 위해서 분석용 모델인 "비용편익분석"을 활용 하여 제조기업의 어떤 사업계획에 의하여 생겨나는 자본요소가 어떻게 투자되어야 생산비용을 최소화 할 수 있는지를 자본투자에서 가장 핵심적인 생산설비투자와 기술개발투자에 대한 비용편익분석을 통하여 그 방법론을 제시함으로써, 자본투자에 있어서 "비용효과분석"의 활용성을 확인하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.86-96
• /
• 2006

In recent year, EPON(Ethernet PON) system is expected to be more attractive solutions for high speed, broadband access networks in next generation access networks due to the conversionce of low-cost ethernet equipment and low-cost fiber infrastructure. Upstream channel control algorithm is essential to hare upstream bandwidth in EPON. In this paper, we suggest HUHG(High Utilization and Hybrid Granting) algorithm for supporting high bandwidth utilization and QoS for different service class. This algorithm improves bandwidth utilization as removing or diminishing idle time of upstream channel using characteristics of fixed EF(Expedited Forwarding) sub-cycle. The proposed algorithm also minimizes the packet delay and delay variation of EF class. We conduct detailed simulation experiments using OPNET to study the performance and validate the effectiveness of the proposed algorithm.

• Journal of Powder Materials
• /
• v.5 no.4
• /
• pp.293-298
• /
• 1998

In all larger hardmetal workshops furnaces for dewaxing, vacuum sintering or vacuum and overpressure sintering are today's standard. The furnace technology is well established. Equipment specifications such as operating overpressure, determine sintering cost, product quality, safety and reliability of the furnace and ultimately influence the competitiveness of the hard metal procucer in the global market. Essential furnace requirements are an efficient utilization of the furnace, an environmental friendly dewaxing system, high temperature uniformity, metallurgical treatment with process gases, as well as reduced cooling time by means of rapid cooling. Examples of reduced sintering costs are described achieved using a new design of vacuum sintering furnace with an improved rapid cooling device, cooling times are reduced by up to 45%. Additionally, a cost comparison of two different designs of vacuum overpressure sintering furnaces are included.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.4
• /
• pp.100-109
• /
• 2012

Large road construction projects are typically partitioned into sections that are then contracted individually to contractors. Each section requires using similar heavy equipment including excavators, dump trucks and pavers, which constitute the highest cost. Normally the equipment is not shared between them, as each contractor wishes to have their equipment readily available. However, such practices result in very low utilization of these equipment. The goal of this research is to develop a programmatic resource sharing system in which contractors can share equipment depending on the changing needs of a multi-sectioned road project. This paper introduces the results of a survey performed to investigate how contractors currently manage the supply and demand of equipment and the equipment that are practical for sharing across a project. More importantly, the paper describes a set of metrics (DPR, nDPR, SDI) needed to quantify the amount of supply/demand variance occurring in each section. The metrics were used on an actual road construction project, and the results show that each section suffers from an imbalance between its monthly planned and actual utilization of equipment. The results also indicate that the sharing of the equipment can lead to potentially large savings as equipment requirements can be met within a project as to short leasing from outside vendors.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.5
• /
• pp.1708-1734
• /
• 2022

In the development of logistics system, the breakthrough of important technologies such as technology platform for logistics information management and control is the key content of the study. Based on Javascript and JQuery, the logistics system realizes real-time monitoring, collection of historical status data, statistical analysis and display, intelligent recommendation and other functions. In order to strengthen the cooperation of warehouse storage, enhance the utilization rate of resources, and achieve the purpose of real-time and visual supervision of transportation equipment and cargo tracking, this paper studies the VNF dynamic deployment and SFC routing problem in the network load change scenario based on the logistics system. The BIP model is used to model the VNF dynamic deployment and routing problem. The optimization objective is to minimize the total cost overhead generated by each SFCR. Furthermore, the application of the SFC mapping algorithm in the routing topology solving problem is proposed. Based on the concept of relative cost and the idea of topology transformation, the SFC-map algorithm can efficiently complete the dynamic deployment of VNF and the routing calculation of SFC by using multi-layer graph. In the simulation platform based on the logistics system, the proposed algorithm is compared with VNF-DRA algorithm and Provision Traffic algorithm in the network receiving rate, throughput, path end-to-end delay, deployment number, running time and utilization rate. According to the test results, it is verified that the test results of the optimization algorithm in this paper are obviously improved compared with the comparison method, and it has higher practical application and promotion value.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1676-1681
• /
• 2006

We report on Organic Vapor Phase Deposition $(OVPD^{(R)})$ an innovative deposition technology for organic light emitting device (OLED) and organic semiconductor manufacturing. The combination of $OVPD^{(R)}$ with Close Coupled Showerhead (CCS) technology results in manufacturing equipment with vast potential for cost effective manufacturing of OLED displays commercially competitive to LCD. The actual $OVPD^{(R)}$ equipment concept and design is discussed: Computational Fluid Dynamic (CFD) modeling is compared with experimental results proving the excellent controllability of the deposition process. Further other production relevant deposition properties are being reviewed e.g. high deposition rates and high organic material utilization efficiency of the $OVPD^{(R)}$ - Technology. Data from devices made by $OVPD^{(R)}$ show comparable/ superior performance to those fabricated with conventional vacuum thermal evaporation (VTE) techniques. An outlook on further potentials of $OVPD^{(R)}$ with respect to enabling advanced organic device structures is given.

• Korea Journal of Hospital Management
• /
• v.2 no.1
• /
• pp.1-21
• /
• 1997

In order to analyze the shifts in the volume and profits of Computed Tomography(CT) and Magnetic Resonance Imaging(MRI) utilization for a year before and after the implementation of insurance coverage for CT, this study has been undertaken examining CT and MRI cost data from 'Y' University Hospital situated in Seoul, Korea. Following are the results of this study: 1. The medical insurance payment for CT, implemented on January 1, 1996, increased CT utilization from January 1996 to April 1996 due to low insurance premiums: however, from May 1996 the number of CT cases significantly decreased as a result of strengthened medical cost reviews and the new 'Detailed standards for approval of CT' announced near the end of April 1996 by the insurer. 2. Since the implementation of insurance coverage for CT, CT fee reduction rates for reimbursements by the insurer to the hospital were 50% and 40% for January and February, respectively, and 31% and 15% for March and April. A significant point in the lowering of the reduction rate was reached in May at 11%; furthermore, since June the reduction rate fell below the average reduction rate for reimbursements for all procedures. If the 'Detailed standards for approval of CT' had been announced before the implementation of insurance coverage for CT, CT utilization would not have been so high due to the need to meet those 'standards'. In addition, loss of hospital profits resulting from the reduction for reimbursements would not have occurred. 3. The shifts in MRI utilization showed that there was no particular change with the beginning of insurance coverage for CT, and the introduction of the 'Detailed standards for approval of CT' made MRI utilization increase because MRI is free of restrictions imposed by the insurer. 4. The relationship between CT utilization and MRI utilization showed that they were supplementary to each other before insurance coverage for CT, but that CT was substituted for MRI because of strengthened medical cost reviews after t~e beginning of insurance coverage for CT. 5. The shifts in volume by patient characteristics showed that the number of inappropriate case patients, according to the insurer's "Standards for approval", decreased more than the number of appropriate case patients after the introduction of insurance coverage for CT. Therefore, the health insurance fee schemes for CT have influenced patient care. 6. The shifts in profits from CT utilization showed a net profit decrease of 31.6%. In order to match the pre-coverage profit level, 5,471 more cases would need to be seen and productivity would need to be increased by 32.7%. This profit decrease resulted from a decrease of CT utilization and low reimbursements. With insurance coverage, net profits from CT were 24.4%, and a margin of safety ratio was 39.6%. Because of the net profits and margin of safety ratio, CT utilization fees for insured appropriate cases could not be considered inappropriate. 7. The shifts in profits from MRI utilization before and after the introduction of CT coverage showed that in order to match pre-CT coverage profit levels, 2,011 more cases would need to be seen and productivity would need to be increased by 9.2%. The reasons for needing to increase the number of cases and productivity result from cost burdens created by adding new MRI units. But with CT coverage already begun, MRI utilization increased. Combined with a minor increase in the MRI fee schedule, MRI utilization showed a net profit increase of 18.5%. Net profits of 62.8% and a 'margin of safety ratio' of 43.1% for MRI utilization showed that the hospital relied on this non-covered procedure for profits. 8. The shifts in profits from CT and MRI utilization showed the net profits from CT decreased by 2.33billion Won while the net profits from MRI increased by 815.7million Won. Overall, these two together showed a net profit decrease of 1.51billion Won. The shifts in utilization showed a functional substitutionary relationship, but the shifts in profits did not show a substitutionary relationship. From these results, We can conclude that if insurance is to be expanded to include previously uncovered procedures using expensive medical equipment, detailed standards should be prepared in advance. The decrease in profits from the shifts in coverage and changes in fees is a difficult burden that should be shared, not carried by the hospital alone. Also, a new or improved fee schedule system should include revised standards between items listed and the appropriateness of the fee schedule should constantly be ensured. This study focused on one university hospital in Seoul and is therefore limited in general applicability. But it is valuable for considering current issues and problems, such as the influence of CT coverage on hospital management. Future studies will hopefully expand the scope of the issues considered here.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.550-564
• /
• 2020

Distillation columns are one of the main equipment used for the separation of chemical components in petrochemical process design. However, in spite of the efficient operation in wide range, and the advantage of data collection for equipment verification, the distillation columns are inherently known for high energy consumption and capital cost. Hence, the trade-off analysis needs to be done between investment cost and operation cost to develop the most economical distillation columns. This study was conducted using Aspen Plus, a popular process simulation program, in the pursuit of broad application by as many process engineers as possible. In this paper, design variables for optimization of distillation columns were defined to improve emphatically the design quality with reducing erratic practice of many engineers. In addition, by eliminating unnecessary reviewing step and establishing systematic and efficient procedures, the amount of time for design and human resources were minimized. Aspen Process Economic Analyzers (APEA) program was introduced in order to calculate the investment cost reliably, and the efficient systematic procedure for utilization of APEA was established.