• 한국환경농학회지
• /
• 제34권4호
• /
• pp.268-273
• /
• 2015

본 연구는 유류로 오염된 토양의 정화를 위한 생물자극법에서 퇴비의 시용효과를 알아보기 위해 실시되었다. TPH로 오염된 토양에 퇴비를 수준별로 처리 한 후 TPH 함량 변화를 관찰 한 결과, 퇴비 처리량이 증가 할수록 토양 내 TPH 함량이 감소하는 경향이 나타났다. TPH 분해율을 알아보고자 퇴비 처리수준에 따른 TPH 함량 변화를 1차와 2차 kinetics 모델에 적용하여 결정계수(R²)를 비교 한 결과 second order kinetic 모델의 결정계수 값이 잘 적용되었다. 퇴비를 처리하였을 때 seond-order kinetic 모델의 reaction rate constant 값은 퇴비를 30 Mg/ha 이상 처리하였을 때 무처리 보다 4배 정도 높게 나타났으며, 퇴비 처리 수준이 높아질수록 그 값은 증가하는 경향을 보였다. 퇴비의 처리량을 증가시킴에 따라 토양 내 미생물의 수는 증가하는 경향을 나타냈다. 또한 퇴비의 처리량은 토양 내 미생물 수와 TPH 함량의 변화와 밀접한 관계가 있음을 보여주었다. 따라서 TPH로 오염된 토양 내 적합한 양의 퇴비 처리는 토양 내 미생물 수를 증가시켜 TPH 함량의 감소를 가속화시킬 수 있을 것으로 판단된다.

• 한국지구과학회지
• /
• 제24권3호
• /
• pp.205-215
• /
• 2003

정밀하고 밀도 높은 부우게이상자료는 지구물리학과 물리측지학적인 측면에서 중요한 기초자료가 된다. 이를 위해서 정밀한 절대중력기준점망의 설치외에도 두 가지 측면을 고려해야 하는데, 하나는 중력측정과 보정의 정밀도를 향상시키는 것이며, 다른 하나는 측점의 밀도를 높이는 일이다. 중력측정에서 GPS를 어떻게 적절히 이용할 것인가에 대해서 알아보았는데, 40km이내의 기선거리에서 두 대의 측지용 GPS수신기를 이용하면, 5분간의 GPS측정으로도 충분하다고 여겨진다. 이 경우 PNU95 지오이드모델과 같은 정밀한 지오이드모델을 사용하여야 한다, 이 방법을 적용함으로써, 비용 및 시간과 인력을 줄일 수 있을 뿐만 아니라 질적인 측면에서도 향상을 가져온다. 또 교점오차를 보정하고 지형효과를 정밀하게 계산하기 위해 컴퓨터 프로그램을 개발했다. 중력탐사에서 같은 지점에서 중복 측정하는 것은 스프링의 변이를 보정하는 것뿐만 아니라 망조정을 적용함으로써 결과들에 대해 통계적으로 접근하는 것을 가능하게 한다. 그럼으로써 다양한 원인에 기인한 큰 오차를 쉽게 찾아내고 보정하여 자료의 질을 향상시킬 수 있으며, 또한 측정의 질을 평가할 수 있다. 최근의 컴퓨터 기술과 디지털 고도자료의 발달도 좀더 정밀한 지형보정을 사용하여 부우게이상의 질을 향상하도록 우리를 고무하고 있다. 본 연구에서는 육상중력, 선상중력, 북한의 부우게이상도, 일본의 중력자료, 고도위성자료, EGM96 지오포텐셜 자료 등, 다양한 중력자료를 입수하였다. 따라서, 이들 자료를 계산하고 편집하여 한반도 일원의 정밀 부우게이상도를 작성할 수 있었는데, 이것은 지구물리학과 물리측지학의 응용에 유용한 자료가 될 것이다.

• 한국물환경학회지
• /
• 제23권4호
• /
• pp.467-473
• /
• 2007

Although the dominant land use at the Imha-dam watershed is forest areas, soil erosion has been increasing because of intensive agricultural activities performed at the fields located along the stream for easy-access to water supply and relatively favorable topography. In addition, steep topography at the Imha-dam watershed is also contributing increased soil erosion and sediment loads. At the Imha-dam watershed, outflow has increased sharply by the typhoons Rusa and Maemi in 2002, 2003 respectively. In this study, the Soil and Water Assessment Tool (SWAT) model was evaluated for simulation of flow and sediment behaviors with long-term temporal and spatial conditions. The precipitation data from eight precipitation observatories, located at Ilwol, Subi and etc., were used. There was no significant difference in monthly rainfall for 8 locations. However, there was slight differences in rainfall amounts and patterns in 2003 and 2004. The topographical map at 1:5000 scale from the National Geographic Information Institute was used to define watershed boundaries, the detailed soil map at 1:25,000 scale from the National Institute of Highland Agriculture and the land cover data from the Korea Institute of Water and Environment were used to simulate the hydrologic response and soil erosion and sediment behaviors. To evaluate hydrologic component of the SWAT model, calibration was performed for the period from Jan. 2002 to Dec. 2003, and validation for Jan. 2004 to Apr. 2005. The $R^2$ value and El value were 0.93 and 0.90 respectively for calibration period, and the $R^2$ value and El value for validation were 0.73 and 0.68 respectively. The $R^2$ value and El value of sediment yield data with the calibrated parameters was 0.89 and 0.84 respectively. The comparisons with the measured data showed that the SWAT model is applicable to simulate hydrology and sediment behaviors at Imha dam watershed. With proper representation of the Best Management Practices (BM Ps) in the SWAT model, the SWAT can be used for pre-evaluation of the cost-effective and sustainable soil erosion BMPs to solve sediment issues at the Imha-dam watershed. In Korea, the Universal Soil Loss Equation (USLE) has been used to estimate the soil loss for over 30 years. However, there are limitations in the field scale mdel, USLE when applied for watershed. Also, the soil loss changes temporarily and spatially, for example, the Imha-dam watershed. Thus, the SW AT model, capable of simulating hydrologic and soil erosion/sediment behaviors temporarily and spatially at watershed scale, should be used to solve the muddy water issues at the Imha-dam watershed to establish more effective muddy water reduction countermeasure.

• 한국화재소방학회논문지
• /
• 제18권1호
• /
• pp.54-66
• /
• 2004

본 논문은 도시 가스 지하배관의 위험관리체계를 유지하는데 필요한 요소들 중 배관의 위험성평가에 적절한 기법을 제안하고, 그 평가결과에 근거하여 가장 비용-효과가 큰 배관 유지관리방안을 찾아내는데 그 목적이 있다. 본 연구에서 제안된 지하배관의 위험성서열화의 접근방법은 세 가지 측면에서 행하여졌는데, 첫째는 RBI(Risk Based Inspection)으로서 배관의 위험도에 영향을 주는 주변인구조건, 관의 크기 및 두께. 사용시간 등을 기준으로 일차적 평가를 함으로서 노출위험도의 높고 낮음을 정성적으로 평가하였고, 둘째는 Scoring System으로서 매설된 배관의 환경적인 요소에 기초하여 점수화하여 구체적으로 위험도를 서열화 하였다. 셋째로는 THOMAS 이론으로부터 대상배관의 누출빈도를 정량화 하였다. 그 결과 도시 가스 대상배관의 노출위험도는 대략 중간이상의 값을 갖는 것으로 나타났으며, 제안된 SPC기법을 적용하여 위험성을 평가한 결과, 대상배관의 부식위험성 점수 값이 허용범위(30-70)에 골고루 분포하는 것으로 보아 설정된 평가기준이 실제배관에 대해 상대적인 부식위험성을 잘 서열화 됨을 알 수 있었다. 또한 THOMAS모델을 적용한 평가결과로서의 Score값은 배관의 길이를 포함한 여러 치수들에 무관한 환경요인에 관련된 값인 반면, 기본누출빈도는 배관의 길이를 포함해서 다른 치수들에 비례함을 보여주고 있다. 그 결과 점수 값이 상대적으로 적은 배관구간(상대적으로 위험성이 낮은 구간)도 배관길이가 훨씬 더 크다면 누출발생빈도가 더 높은 값을 갖는다는 것을 알 수 있었다. 또한 대상 파이프라인의 허용위험수용범위는 전체 누출 빈도 값인 최대 1.00E-01/yr로부터 최소 2.50E-02의 영역을 나타내고 있어 이에 상응되는 높은 Consequence를 수용 가능한 영역으로 낮추는 조치가 필요함을 보여주고 있고, 종합파손확률에 대해 사용시간을 회기 분석법(Regression Analysis)으로 예측한 결과, 이에 대한 방정식을 유추할 수 있었고, 그에 대한 결과가 대상 파이프라인의 사용 년 수인 11년에서 13년으로 나타나 실제 대상배관들의 연령과 거의 일치함을 알 수 있었다. 따라서 본 연구에서 제안된 위험성 서열화 접근방법은 실제적으로 지하배관의 유지관리를 하는데 있어서 매우 효율적으로 적용될 수 있을 것으로 사료된다.

• 대한안과학회지
• /
• 제59권11호
• /
• pp.1039-1048
• /
• 2018

목적: 연령관련황반변성 환자에 대해 항혈관내피성장인자의 가능한 치료 방법에 따라 건강보험 재정에 미치는 영향을 분석하였다. 대상과 방법: 여러 치료 방법에 따른 건강보험 재정의 변화를 향후 5년(2018-2022년) 동안 추정하였다. 새로운 급여기준 이외 바이오시밀러 등장, 허가초과 비급여약제 사용 등을 고려한 시나리오에 대해서도 재정 영향을 분석하였다. 국민건강보험공단 청구자료 및 의료기관 자료를 기준으로 각 시나리오별로 향후 5년 동안 예상 진료환자 수, 치료 횟수를 추정하였으며, 재정부담을 추계하였다. 결과: 연령관련황반변성에서 현행의 사용형태로 기존 급여기준(평생 14회)이 유지되는 경우(시나리오 1) 2018년 기준 향후 5년간 보험소요재정은 약 4,403억 원으로 추정되었다. 2017년 12월에 변경된 급여기준하에서 5년간 보험소요재정은 약 5,601억 원으로 추정되었다. 2020년 이후 바이오시밀러 급여(시나리오 3), 현재 허가초과 비급여약제인 베바시주맙(시나리오 4)을 급여전환하는 경우에 각각 5,210억 원, 4,197억 원으로 예상되었다. 결론: 본 평생 14회라는 급여기준 삭제로 인해 건강보험 재정이 크게 증가할 것이 예상되었으나 실제 0.1 이하 그리고 반흔화/위축성 병변일 경우 급여 중단 등의 새로운 기준으로 중간폭으로 증가하는 것으로 나타났다. 또한 고령화로 인한 연령관련황반변성 유병환자의 증가를 고려할 때 바이오시밀러 및 베바시주맙 도입 등의 정책적 대안도 고려할 수 있다.

• 생물환경조절학회지
• /
• 제30권4호
• /
• pp.419-428
• /
• 2021

모바일 기반 온실에너지 계산프로그램을 제작하기 위해 먼저 주요 단일 피복재 10종 및 보온재 16종에 대한 열관류율 측정하였다. 또한 피복 및 보온재를 이중 및 삼중으로 다층 설치할 때 열관류율 추정을 위하여 이중 설치시 24조합, 삼중설치 시 59조합에 대한 열관류율을 핫박스를 이용하여 측정하였다. 단일 피복재에서는 PE필름(0.08mm) 대비 PO필름(0.15mm)이 가장 열관류율이 가장 작고 열절감율이 가장 큰 것으로 나타났다. 단일 보온재에서는 열관류율에서는 외피가 있는 5겹의 다겹보온커튼이 가장 보온력이 좋은 것으로 나타났다. 또한 단일자재에 대한 열관류율 값과 열저항값을 이용한 피복 및 보온재의 다층설치시의 총 열관류율 값을 산정하였고 실측 값과의 오차를 보정하는 선형회귀식을 도출하였다. 단일재료의 열관류율값에 의한 피복 및 보온재의 다층설치시 열관류율 추정 모형을 개발한 결과 모형평가지수가 0.90(0.5 이상일 때 양호)으로 나타나 추정치가 실측치를 매우 잘 재현 하고 있는 것으로 나타났다. 또한 시험온실을 통한 실증시험결과 예측된 열절감율이 실측치보다 상대오차 2%로 작게 나타나는 것으로 평가되었다. 이러한 연구결과를 기반으로 모바일 기반의 온실 에너지계산 프로그램을 개발하였다. 이 프로그램은 HTML5 표준 웹 기반 모바일 웹 애플리케이션으로 구현하였으며 N-Screen 지원을 통해 다양한 모바일 장치 및 PC 브라우저에서 동작이 가능하게 제작되었다. 또한 온실 피복(12종) 및 보온재(16종)의 조합별 열관류율 및 난방부하계수를 제공하여 농민이 모바일로 온실 위치, 형태 및 피복·보온재 등을 반영한 최대 주야간 냉난방부하 및 기간 난방부하를 산정할 수 있다. 대상 온실의 에너지 소비량에 대한 평가가 가능하며 온실의 지역 및 형태에 따라 피복 및 보온재의 최적 선택으로 에너지 절감형 온실 설계가 가능할 것으로 판단되었다.

• 대한원격탐사학회지
• /
• 제39권5_3호
• /
• pp.1009-1029
• /
• 2023

도시 수목은 탄소를 저장하고 불투수면적을 감소시키는 도시 생태계의 중요 요소이며, 탄소 저장량 및 순환량 산정 시 주요 정보로 활용될 수 있다. 많은 선행 연구에서 항공 라이다 자료 및 인공지능 기법을 활용하여 고해상도 수목 정보를 산출하고 있으나, 항공 라이다 영상은 제공하는 플랫폼이 제한되어 있으며 비용적인 면에서도 한계가 다수 존재한다. 따라서 본 연구에서는 수원시를 대상으로 자료 취득이 용이한 고해상도 위성 영상인 Sentinel-2를 활용하여 기계학습 기반의 도시 내 수목 피복률(fractional tree canopy cover, FTC)을 추정하고자 하였다. Sentinel-2 시계열 영상으로부터 중앙값 합성을 수행하여 수원시 전역에 대한 단일 영상을 제작하여 활용하였다. 도시 내 토지 피복의 이질성을 반영하기 위하여, 30 m 격자내 10 m 해상도의 광학 지수의 평균 및 표준편차 값과 환경부 세분류 토지 피복 지도 기반 항목별 피복률을 계산하여 기계학습 모델의 입력 변수로 활용하였다. 총 4가지의 입력 변수 조합을 설정하여, 입력 변수 구성에 따른 FTC 추정 정확도를 비교 및 평가하였다. 광학 영상의 평균 정보만을 활용(Scheme 1)했을 때 보다 도시 내 이질적인 특성을 반영할 수 있는 표준 편차 및 피복률 정보를 모두 함께 고려(Scheme 4, S4)했을 때 향상된 성능을 나타낼 수 있었다. 검증용 자료에 대해 S4의 Random Forest (RF) 모델이 0.8196의 R², 0.0749의 mean absolute error (MAE), 및 0.1022의 root mean squared error (RMSE)로 전체 기계학습 모델 중에서 성능이 가장 높게 나타났다. 변수 기여도 분석 결과 광학 지수의 표준 편차 정보는 도시 내 복잡한 토지 피복 지역에 대해 높은 기여도를 나타내었다. 훈련된 S4 구성의 RF 모델을 수원시 전역에 대해 확장 적용하였을 때, 참조 FTC 자료에 대해 0.8702의 R², 0.0873의 MAE, 및 0.1335의 RMSE의 우수한 성능을 나타냈다. 본 연구의 FTC 추정 기법은 향후 다른 지역에 대한 적용성이 우수할 것으로 판단되며, 도시 생태계 탄소순환 파악의 기초자료로 활용될 수 있을 것으로 기대된다.

• 마케팅과학연구
• /
• 제20권1호
• /
• pp.35-48
• /
• 2010

今天, 受到成熟零售市场挑战的时装市场需要新的 "品牌发展" 典范来提高他们的竞争优势. 时装市场的一个重要议题是为满足消费者由于生活方式的变化而产生的特别需求所进行的生活方式品牌扩张. 时装品牌扩张到生活方式产品类别, Y世代和婴儿潮可以说是新兴的 "前景"(婴儿潮的消费者正在改变他们的生活方式. Y世代正经历着他们生命阶段的变化). 他们有购买新产品的需求. 因此, 服装公司为品牌扩张注重消费群从而在新的产品类别中建立和管理他们的品牌资产是乐观的. 本文的研究目的是(a)评估母品牌和子品牌的品牌资产. (b)鉴定消费者对品牌扩张的感知营销因素. (c)评估两个选择的群体(Y世代和婴儿潮)的营销因素和扩张到生活方式的产品类别(包括家居时尚产品)品牌的品牌资产之间因果关系的结构方程模型. 关于理论框架, 本文关注传统的营销4P组合来鉴定哪个营销因素在品牌扩张资产方面更重要. 比较营销可以建立 "品牌扩张资产", 从而成功的进入新类别. 借鉴相关的文献, 通过关注选择的消费者(Y世代, 婴儿潮), 本研究发展的研究假设结合了品牌资产因子和营销因素. 在品牌扩张至生活方式产品的背景下, 品牌资产的构念包括品牌认知/联合, 品牌感知(例如感知质量, 情感价值)和从CBBE因子(Keller, 2001)中而来的品牌共鸣. 据推测, 通过品牌扩张至生活方式产品, 市场营销要素在品牌认知/联合, 品牌感知方面创建品牌扩张资产, 进而影响品牌的共鸣. 为了收集数据, 样本由韩国Y世代的女性消费者和在婴儿潮中出生的消费者. 这些在婴儿潮中出生的消费者由于生活周期的改变而对生活方式产品有较高的需求. 在韩国Y世代(n=326)和婴儿潮(n=325)的女性消费者中共有651份有用的问卷被使用. 我们用LISREL8.8测试了使用相关矩阵的结构和测量模型. 结果显示品牌扩张的感知营销因素包括三个因子: 价格/店铺形象, 产品和广告. 在Y世代的模型中, 价格/店铺形象对品牌资产因素有积极的影响(例如品牌认知/联合, 感知质量). 同时, 在品牌扩张中产品对情感价值有积极的影响. 品牌认知/联合有可能提高感知质量和情感价值, 从而对扩张至生活方式产积极的品牌产生品牌共鸣. 在婴儿潮消费者模型中, 价格/店铺形象对感知质量有积极的影响, 感知质量可以创造品牌扩张的品牌共鸣. 产品对质量感知和情感价值有正的影响, 这些都会消费者产生对扩张至生活方式产品的品牌的品牌共鸣. 但是, 在这两个群体中广告和品牌资产都是负相关. 本研究为时装营销者提供了发展成功的品牌扩张战略以及可持续的竞争优势的见解. 本研究补充和扩展了先前的有关通过营销努力的因素促使品牌扩张成功的研究. 研究结果支持为进入新的产品类别, 时装品牌扩张(Aaker and Keller, 1990; Tauber, 1998; Shine et al., 2007; Pitta and Katsanis, 1995)和营销行动的增效作用. 因此, 我们推荐营销者同时针对Y世代和婴儿潮一代通过标准化的营销推广进入新产品类别(例如家具)可以降低营销成本. 时装营销者可以(a)提供高价的产品线. (b)在韩国通过零售渠道(例如专门百货商店)强调高档特征的商店形象定位. (c)结合服装与生活方式产品包括新颖的款式和设计师的限量版. 对品牌资产,成功品牌延伸的关键是消费者的品牌认知度和品牌联合,确保新产品类别的品牌特征. 对于营销者来说, 在进入新产品类别的时候知道什么有助于更具体的联合是必要的. 对时装品牌而言, 品牌扩张的第二个关键是进入 "奢侈" 生活方式新产品类别的途径. 更高的价格或店铺形象都对质量感知有影响. 而质量感知可以引起品牌共鸣. 更重要的是, 本研究提高了对品牌扩张的理论理解并对营销者提出了在制定针对Y世代和婴儿潮一代消费者的行销项目时的方向.

• 한국유통학회지:유통연구
• /
• 제16권4호
• /
• pp.65-93
• /
• 2011

B2B 시장에서 구매자와 판매자간의 관계는 매우 밀접하고 장기화되는 것이 특징이므로 결국 단순한 제품을 판매하는 것에 그치는 것이 아닌 지속적인 서비스에 대한 중요성이 날로 커지고 있다. 산업재 연구 전반에 걸쳐서도 서비스에 대한 중요성과 관심이 증대되면서 고객이 서비스를 사용하는데 있어서 그 서비스의 품질과 함께 최근 소비자들은 얼마나 빠르고 쉽게 서비스가 제공되어 투입되는 노력을 최소화시킬 수 있는가를 매우 중요하게 생각하기 때문에 편의성이 중요한 요인으로 고려되어지고 있다. 이에 따라, 본 연구에서는 산업재 시장에서 관계만족과 관계성과를 형성하는데 중요하게 생각할 수 있는 새로운 요인이 어떤 것인가 라는 의문점에서 출발하여, 서비스 편의성과 관계성과 사이의 구조적 관계를 조사하고자 하였다. 이 연구의 가장 큰 학문적 기여점은 산업재 연구에서 주류를 이루고 있는 관계품질과 관계성과의 새로운 선행요인을 검증한 것이다. 또한 소비재 시장에서 주로 연구되었던 서비스 편의성 척도를 산업재 시장에 적용하여 그 활용도를 실험해 보았다는 데 의의가 있다. 본 연구는 서비스 편의성의 구성요소인 서비스 편의성을 결정편의성, 접근편의성, 거래편의 성, 편익편의성, 사후편익편의성 다섯가지 차원으로 구분하고 관계적 요인인 관계만족에 미치는 영향과 이러한 관계만족이 관계몰입과 관계성과에 어떠한 영향을 미치는가를 분석하여 서비스 편의성의 관리와 투자에 대한 마케팅 측면의 중요성을 제시하고 있다. 실증분석을 위해 산업재 서비스를 이용하고 있는 기업의 직원들을 대상으로 설문을 통해 데이터를 수집하였으며 서비스 편의성 ${\rightarrow}$ 관계만족 ${\rightarrow}$ 관계몰입 $\{rightarrow}$ 관계성과에 대한 인과적 구성모텔에 대해 구조방정식 모델분석으로 검증하였다. 구성모텔에 대한 분석결과 서비스 편의성을 구성하는 요소 중 접근편의성을 제외한 나머지 결정편의성, 거래편의성, 편익편의성, 사후편익편의성은 모두 관계적 요인들에 긍정적인 영향을 미쳤으며, 그 중 편익편의성이 관계적 요인에 가장 큰 영향을 주는 것으로 나타났다. 또한 추가적으로 매개효과검증을 실시하여, 서비스 편의성과 관계성과의 관계를 살펴보는데 있어서, 서비스 편의성이 관계만족과 관계몰입을 통해서 관계성과에 긍정적인 영향을 주는 구조적 인 관계를 가지고 있음을 알 수 있었다. 이는 높은 서비스 편의성에 대한 관리와 투자가 구매자로 하여금 관계에 만족하게 만들고 이렇게 형성된 관계만족은 관계에 몰입하게 하여 결과적으로는 관계성과를 가져올 수 있음을 시사한다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.