• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.459-468
• /
• 2016

The decreasing number of import and export containers is causing a problem with container circulation. In particular, this problem has reached a serious level in the Gyeongin area. Empty containers are accumulating in the Gyeongin container yard, where most of the returned containers are stored. In order to improve the empty container return problem at Gyeonhin, this study analyzes the actual situation and the empty container return process. A preference survey was conducted to suggest solutions from the perspective of users rather than shippers. A logistics company's data was analyzed to identify the inefficient cost structure in the Gyeongin area. The results show that the empty container return problem in Gyeongin is becoming more and more serious. To solve this problem, this paper proposes reestablishing functions at the Incheon Port, and securing a third new storage terminal in the Gyeongin area. Finally, an efficient empty container circulation system is presented. It will also be necessary to prepare laws and institutions to ensure these solutions.

• The KIPS Transactions:PartC
• /
• v.14C no.4
• /
• pp.349-358
• /
• 2007

Ethernet Passive Optical Network(EPON), which is one of PON technologies for realizing FTTx(Fiber-To-The-Curb/Home/Office), can cost-effectively construct optical access networks. In addition, EPON can provide high transmission rate up to 10Gbps and it is compatible with existing customer devices equipped with Ethernet card. To effectively control frame transmission from ONUs to OLT EPON can use Multi-Point Control Protocol(MPCP) with additional control functions in addition to Media Access Control(MAC) protocol function. For EPON, many researches on intra- and inter-ONU scheduling algorithms have been performed. Among the inter-ONU scheduling algorithms, IPS(Interleaved Polling with Stop) based on polling scheme is efficient because OLT assigns available time portion to each ONU given the request information from all ONUs. Since the IPS needs an idle time period on uplink between two consecutive frame transmission periods, it wastes time without frame transmissions. In this paper, we propose a dynamic bandwidth allocation algorithm to increase the channel utilization on uplink and evaluate its performance using simulations. The simulation results show that the proposed Two-phase Cycle Danamic Bandwidth Allocation(TCDBA) algorithm improves the throughput about 15%, compared with the IPS and Fast Gate Dynamic Bandwidth Allocation(FGDBA). Also, the average transmission time of the proposed algorithm is lower than those of other schemes.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.271-280
• /
• 2010

For the next generation mobile communication system, diverse wireless network techniques such as beyond 3G LTE, WiMAX/WiBro, and next generation WLAN etc. are proceeding to the form integrated into the All-IP core network. According to this development, Beyond 3G integrated into heterogeneous wireless access technologies must support the vertical handover and network to be used of several radio networks. However, unified management of each network is demanded since it is individually serviced. Therefore, in order to solve this problem this study is introducing the theory of Common Radio Resource Management (CRRM) based on Generic Link Layer (GLL). This study designs the structure and functions to support the vertical handover and propose the vertical handover algorithm of which policy-based and MCDM are composed between LTE and WLAN systems using GLL. Finally, simulation results are presented to show the improved performance over the data throughput, handover success rate, the system service cost and handover attempt number.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.3 s.51
• /
• pp.640-650
• /
• 1995

After the introduction of National Medical Insurance in 1989, the medical demand has rapidly increased. The impact of increased medical demand was followed by an increase in the number of claims in need of review. We studied a new, fair method for reducing the number of claims reviewed. We analysed 90,583 outpatient claims submitted between September and October; claims were made for services given August of 1994. We finally suggested a screening system for claims review using a statistical method of discriminant analysis of the medical costs. The results were as follows. 1. In the cut-off group, age, days of medication, number of hospital or clinic visits, and total charge were significantly high. The cut-off rates according to the hospital-type and existence of accompanied disease were significantly different 2. According to ICD, the cut-off rate was highest in peripheral enthesopathies and allied syndromes(20.76%), lowest in acute sinusitis(0.93%). The mean charges were significantly different according to ICD and existence of cut-off. 3. We build discriminant functions by ICD with such discriminant variables as patient age, sex, existence of accompanied disease, number of hospital or clinic visits, and 9 detailed hospital or clinic charges included in claim. 4. We applied the discriminant function for screening those claims that were expected to be cut-off. The sensitivities comprised from 40% to 70%, and specificities from 70% to 95% by ICD. Acute rhinitis had highest sensitivity(100.00%) and other local infections of skin and subcutaneous tissue had highest specificity(98.45%). The expected number of cut-off was 17,762(19.61%). The total sensitivity was 49.62%, the total specificity was 82.57% and the error rate was 19.66%. We lacked economic analysis such as cost-benefit analysis. But, if the new method of screening claims using discriminant analysis were applied, the number of claims in need of review will reduce considerably.

• The Journal of Internal Korean Medicine
• /
• v.26 no.2
• /
• pp.440-452
• /
• 2005

Objective: In the winter of 2002, severe acute respiratory syndrome(SARS) began to spread throughout the world. More than 5,000 cases were reported in China, including over 1,700 cases in Hong Kong Special Administrative Region(Hong Kong SAR). The total number of cases reported from Canada and Singapore was more than 200. The total number of SARS cases world-wide reached 8,437 with incidences in 29 counties. Mortality from SARS is estimated at $10{\sim}12%$. When the SARS outbreak occurred in China, the State Administration of Traditional Chinese Medicine of China immediately initiated clinical research projects on the use of integrated herbal medicine and Western medicine for treating SARS. and, in Hong Kong SAR, research on the use of herbal medicine for the prevention and treatment of SARS. Reports were released during convalescence. The objective of this study is to overview twelve clinical SARS reports of WHO on the treatment of SARS with herbal medicine and evaluate the efficacy and safety of treatment of SARS with herbal medicine, and further to share experiences and knowledge of the treatment of SARS. Methods: Twelve clinical reports about SARS from the WHO were selected, overviewed and evaluated for efficacy and safety of treatments of SARS. Results and Conclusion: Twelve clinical reports about SARS showed that the integrated treatment may have advantages, and the advantages are reflected in the following findings: Firstly, herbal medicine is not targeted only at a specific etiology or a certain pathological link, but also at the pathological status of the patients at that particular time. Therefore, comprehensive readjustment was made through various angles, targets and channels to restore the balance of the body. Secondly, there are advantages in the differentiation of the disease and the treatment. Based on the various symptoms, herbal medicine enables the physician to adopt the most suitable principle, provide individual treatment, and to administer medicine in accordance with the actual process and nature of the illness. Thirdly, there are advantages in the results of the treatment; herbal medicine can relieve symptoms, promote absorption of lung inflammation, improve the degree of blood oxygen saturation, regulate immunological functions, reduce the required dosage of glucocorticoid and other Western medicines, and reduce case fatality rate, in addition to lowering the cost of treatment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.543-550
• /
• 2011

The gravity anomaly is a basic geophysical data applied in various fields such as geophysics, geodesy and national defense. In general, the gravity anomaly is used through a interpolation process based on the constructed database. The gravity variation, however, is appeared in various shapes depending on the topography and the density of the underground structures. Therefore, the interpolation could lead to a large differences if the gravity fields do not satisfy the assumptions on the signal behavior like linear or a certain degree polynomials. Furthermore, the interpolation does not reflect the physical characteristics of the gravity such as the harmonic condition. In this study, the gravity modeling using the plane Fourier series and radial basis functions are performed to overcome the problems in the usual interpolation. The results of the modeling is analyzed for the case of the gravity referenced navigation focused on the signal characteristics. Based on the study, it was found that the results from modeling are not much different to that from the interpolation in a smoothly varied area. In case of the highly varied area, however, a large differences are appeared among the three methods. Especially, the Fourier series shows the most smooth variations in the modeled gravity values while the highest variations appeared in the interpolation. Applying to the gravity referenced navigation, it was found that the modeling is more effective in calculation cost. It is considered that the results from this study provides a basis on effective modeling of the gravity fields in terms of the signal characteristics and resolution for various application fields.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.406-418
• /
• 2020

When developing weapons systems, it is important to implement the functions and performance of equipment suitable for development purposes, but it is very important to ensure that the equipment is capable of operating without any vacuum with reliability after development. Therefore, various activities are carried out to enhance reliability of equipment. Reliability is enhanced by using high-specification parts in development, reliability verification through analysis, and testing using development prototypes to reinforce and improve the parts that are lacking in equipment. However, recently, development schedules are shortened due to rapidly changing external conditions and technologies, and there are cases where sufficient reliability growth activities were not carried out due to problems such as cost. Examples are projects that perform reliability activities only in analytical methods (reliability, FMECA). In this paper, analyzing and testing methods for analysis and testing were carried out on the same equipment through FMECA and super-accelerated life test, the contents of reliability growth activity were derived, the results of design change/review were accordingly compared, the differences between the two methods were analyzed, and measures were proposed to strengthen reliable growth activities. It was concluded that reliable growth activities through analysis from the beginning of development and reliable growth activities through testing should be carried out at the completion of initial prototype production.

• The Journal of the Korea Contents Association
• /
• v.10 no.8
• /
• pp.73-83
• /
• 2010

This paper investigates protocol architecture of a Web-ZigBee gateway for interconnecting TCP/IP-based networks and ZigBee/IEEE802.15.4-based wireless sensor networks. The Web-ZigBee gateway delivers data between the TCP/IP network and the ZigBee network. Since those two networks have different communication protocols, a protocol translation mechanism is needed. Herein, we propose a method to deliver query messages from the Internet to the sensor network and receive data from sensors. The protocol translation is performed in the translation layer that is placed above the two application layers, i.e., the Internet application layer and ZigBee application layer. Among various interfaces, we use CGI programming to take care of translation functions efficiently. The CGI manages query information from a client on the Internet and data from the ZigBee sensor network. Whereas the TCP/IP enabled sensor network overlays two heterogeneous communication protocols, overlaying layers increase the complexity and cost of implementing the sensor network. On the contrary, the sensors in our gateway-based system are not only light (because each communication protocol works independently without overlaying), but also efficient because the translation layer mostly alleviates header overloading.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.8
• /
• pp.611-618
• /
• 2009

Road construction has been worked on by focusing on cost effectiveness such as the reduction of construction costs without understanding the natural environment and ecosystems. In addition, since ecosystems have been destroyed and the habitats of animals and plants have been isolated, wild animals have sought other habitats or have moved into isolated habitats. Thus, issues such as roadkills or the extermination of species are increasingly occurring. Based on this background, the development and application of a general assessment method need to be researched in order to verify whether or not spaces or habitats where animals can be inhabited and their species can be maintained exist. The purpose of this study is to develop an ecosystem map where a conservation value evaluation method considering the functions of an ecosystem where animals live as well as the naturalness of ecosystems is used and can be made into a drawing. The items applied to evaluate the habitat conservation values were naturalness, rarity, and functionality, and sub-items for evaluation were created. GIS as well as the evaluation items were used to create a digital map about the level of importance based on the evaluation criteria. The created digital map showed that it was not limited to the adjustment or distribution of the fauna and flora but was applicable for a general ecosystem evaluation method for the conservation of habitats. It is expected that the isolation of habitats would be able to be minimized if the digital map is used for road construction projects. The digital map is deemed to be able to be used for the construction of environmentally friendly roads, which will minimize the destruction of ecosystems and the isolation of habitats for creatures.

• The Journal of the Korea Contents Association
• /
• v.15 no.9
• /
• pp.403-410
• /
• 2015

Since 1970, MRI has greatly been developing in terms of strength of magnetic field, the number of receipt channels, and short time of examination. With the development of digital systems and wireless network, hospitals have also acquired, saved, and managed digital images taken by various kinds of medical imaging equipment. However, domestic universities fail to provide practice training course independently thanks to expensive practice equipment and high maintenance cost, and rely on clinical training. Therefore, this study developed a MR patient diagnosis program based on Windows PC to help out students before their working in clinical filed. The designed Relational Database of MRI Simulator is made up of seven tables according to functions and data characteristics. Regarding the designed patient information, each stepwise function was classified by the patient registration method in clinical field. In addition, on the assumption of the basic information for diagnosis, each setting and content were classified. The menu by execution step was arrayed on the left side for easy view. For patient registration, a patient's name, gender, unique ID, birth date, weight, and other types of basic information were entered, and the patient's posture and diagnosis direction were set up. In addition, the body regions for diagnosis and Pulse Sequence were listed for selection. Also, Protocol name and other additional factors were allowed to be entered. The final window was designed to check diagnosis images, patient information, and diagnosis conditions. By learning how to enter patient information and change diagnosis conditions in this program, users will be able to understand more theories and terms learned in practice and thereby to shorten their learning time in actual clinical work.