• 한국소프트웨어감정평가학회 논문지
• /
• 제16권1호
• /
• pp.21-26
• /
• 2020

The completeness appraisal of software is performed in various forms, such as assessing the completion level in the development process, calculating the defect rate, estimating the development cost, and calculating the redevelopment cost. Along with this, the problem that is often dealt with is estimation of the development time. Even in a dispute over completeness due to delays in software development, issues of calculating an appropriate development time required to develop a delivery software or a development time required for change requests are often included in the appraisal request. In this paper, we introduce the procedure and method for estimating the appropriate project time of software development so that the appraiser can be applied to the appraisal work for determining the completeness. The method is based on the manual for calculating the appropriate project period of software development project.

• 약학회지
• /
• 제58권3호
• /
• pp.190-199
• /
• 2014

The Korean Pharmaceutical Codex (KPC) analytical method of ambroxol hydrochloride and clenbuterol hydrochloride formulation is complicated and needed to carry out multiple processes during the test. To improve the low efficiency of analytical procedure that makes pharmaceutical laboratory consume much time and high cost to conduct the test of this formulation, this study was performed for simplifying the pretreatment process and optimizing conditions of the HPLC assay. The analytical procedure using HPLC was developed to establish analytical specification for ambroxol hydrochloride and clenbuterol hydrochloride formulations. The newly developed analytical method has good linearity ($R^2$ >0.999), specificity, precision (RSD<1.0%) and the recovery ranges of 98.50~101.84% for ambroxol, 98.29~101.35% for clenbuterol syrup and 98.66~101.71% for clenbuterol tablets. The LOQs were 0.204 ${\mu}g/ml$ for ambroxol, 0.021 ${\mu}g/ml$ for clenbuterol syrup and 0.073 ${\mu}g/ml$ for clenbuterol tablets. The new method was performed with commercially available samples to confirm analytical conditions and validated to be suitable for saving time and cost to control the quality of routine manufactured products. This analytical method will be used for revising the monograph of ambroxol hydrochloride and clenbuterol hydrochloride formulation in next supplement of KPC.

• 정보처리학회논문지D
• /
• 제13D권5호
• /
• pp.683-690
• /
• 2006

CBAM(Cost Benefit Analysis Method)은 아키텍처 전략을 평가할 때 전략으로 인하여 얻게 될 이익(Benefit)뿐만 아니라 비용(Cost) 스케줄, 위험을 함께 고려하여 최적의 아키텍처 전략을 결정하도록 하기 위한 방법이다. 그러나 CBAM은 아키텍처 전략을 평가하는 과정이 이해당사자들의 합의나 투표, 경험적 직관에 의존하고 있어 결정에 대한 명시적인 정량적 증거를 제시하고 있지 못하다. 본 연구에서는 CBAM에서 제시한 이해당사자들의 합의나 투표를 수행하는 과정에 계층분석적 의사 결정 방법인 AHP(Analytic Hierarchy Process)를 도입하여 아키텍처 전략 결정의 증거를 명시적으로 제시할 뿐만 아니라 주관적 판단 오류의 가능성을 줄이고자 한다.

• 대한가정학회지
• /
• 제31권4호
• /
• pp.37-51
• /
• 1993

The Objects of this study are: 1. To compare the housework time of housewives by region and employment status. 2. To compare the economic value of housework by region and employment status. 3. To evaluate the economic value of housework by each method. The subjects of this study were 815 housewives living in Taegu and Kyungsangpookdo. The statistics used for data analysis were frequency, percentile, T-test, ANOVA and Seheffe test by SPSS PC programs: 1) The average housework time was 7.8hours per day. Full-time housewives spent 8.2hours and employed housewives spent 6.7hours to housework. 2) Partially there were significant difference in economic value of housework by employment status. 3) Estimates of economic value of housework by each method of evaluation are : (unit : won) sample mean method monthly (1) Specialized substitute method 587,080 (2) Overall substitute method 760,640 (3) Opportunity cost method 556,060 (4) Reservation wage method 534,070 (5) Subjective evalution method 644,540

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.424-428
• /
• 2005

As the application of NPM in waste administration branch this paper proposes a new waste management method in order to increase the efficiency of resources and reduce the quantity of waste. First the matrix method is suggested which comprehensively consider and integrate the proposals of different government departments. Moreover the inhabitant's attitude toward the new waste management measures was investigated. Based on the investigation the evaluation function was made, which include three elements: necessary budget, the effect of cost decrease and the environmental burden decrease. The optimal method of budget allocation to maximize social welfare is proposed under the condition of limited budget by the evaluation function. By applying this system further local governments will be able to determine their adequate service level and budget size.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.511-514
• /
• 2005

In this study, LCC(Life Cycle Cost) evaluation technique is used for the purpose of accumulation of basic data required for such integrative system construction. We predicted the degradation time of concrete and repair material by neutralization through FEM analysis, and utilized the result for LCC evaluation It turned out that the repair method of construction in the most economical initial measure against degradation and a durable period can be chosen through the LCC evaluation in consideration of the degradation prediction using FEM analysis and the initial construction expense in a durable period and repair expense, and the number of repair times.

• 대한건축학회논문집:구조계
• /
• 제35권10호
• /
• pp.225-234
• /
• 2019

The purpose of this paper is to analyze the additional construction cost of G-SEED certification for domestic office building reflecting the latest standard(G-SEED 2016-2), and to derive cost impact by category and level. Therefore, it is intended to provide quantitave cost data according to G-SEED certification at the planning phase of the project, estimate the additional construction cost per level according to G-SEED Certification of similar project to be carried out in the future, and encourage G-SEED certification by supporting the decision of the owners. Method: The Process and method of this study are summarized in five steps, 1) Review of previous research, 2) Selection of target project, 3) Scenario setting by level, 4) Additional construction cost for each evaluation category, 5) Extraction of additional construction cost ratio by level. Result: This paper analyzed the cost impact by deriving the additional construction cost of detailed category for level improvement according to the revised G-SEED certification(G-SEED 2016-2). In conclusion, an additional construction cost(ratio) of G-SEED projects to the reference building is drawn as good level; 157,426,241 KWN(+0.43%), very good level; 321,907,802 KWN(+0.88%), excellent level; 999,371,478 KWN(+2.74%), and outstanding level; 1,467,047,718 KWN(+4.02%).

• 한국시뮬레이션학회논문지
• /
• 제10권2호
• /
• pp.1-14
• /
• 2001

The layout design of component plays an important role in the design and usability of many engineering products. The Engineering artifacts of today are becoming increasingly complicated. The simulated annealing method has been applied effectively to the layout and packing problems of wafer. The main characteristics of simulated annealing method is that an optimum can be obtained from the many local optimums by controlling the temperature and introducing the statistic flickering. The objective of this study is to suggest a method to apply the simulated annealing method to the three dimensional layout design of submergible boat which has multiple constraint conditions and evaluation criteria. We describe an approach to define cost function, constraints and generate layouts using a computer. In this research three dimensional LAYout Design Optimization Program(LAYDOP ver.2) has been developed. The layout result(the total value of evaluation criteria) designed by a human layout expert has been improved by 31.0% using this program.

• 보건행정학회지
• /
• 제9권1호
• /
• pp.156-177
• /
• 1999

The current method of rate adjustment for inflation is based on the evaluation of the financial performance of hospitals. The method has the disadvantage such as too complicated, expensive process as well as low reliability. This study, therefore, develops the 'Korean Medical Insurance Economic Index(MIEI)' as a new model for the rate adjustment with the use of the macro economic indices. In addition, we calculate the 1992∼1998 rate adjustment with the MIEI, and examines the validity of the MIEI by comparing with the conventional method. Medical costs are classified into nine categories : physician salaries, nurse·pharmacist·medical technician salaries, assistants & others salaries, material cost(by imports), material cost(by domestics), depreciation & rent paid(by imports), depreciation & rent paid(by domestics), power utilities, other administrative costs. Then the category weight which is the ratio of category in the total cost is calculated. Macro economic indices are selected for each cost category in order to reflect the concept of the each cost category and inflation during the year of 1992∼1998. Finally MIEI which integrate all category according to the category weight and selected macro indices is calculated. The mean of hospital MIEI which weighting by amount paid by insurers was cacluated. The result from the application of empirical data to the MIEI model is very similar to that of the current method. Furthermore, this method is very simple and also easy to get social consensus. This MIEI model can be replaced the current method based on the analysis of the financial performance for the adjustment of medical fees.

• 지능정보연구
• /
• 제21권2호
• /
• pp.113-129
• /
• 2015

장소 브랜딩은 특정 장소에 대한 의미 부여를 통해 장소성의 정체성 및 공동가치를 생성하며 가치 창출을 하는데 중요한 활동이며, 장소 브랜드에 대한 이미지 파악을 통해 이루어진다. 이에 마케팅, 건축학, 도시건설학 등 여러 분야에서는 인상적인 장소 브랜드의 이미지를 구축하기 위하여 많은 노력을 기울이고 있다. 하지만 설문조사를 포함한 대면조사 방법은 대부분 주관적인 작업이며 측정에 많은 인력 또는 고도의 전문 인력이 소요되어 고비용을 발생시키므로 보다 객관적이면서도 비용효과적인 브랜드 이미지 조사 방법이 필요하다. 이에 본 논문은 텍스트마이닝을 통하여 장소 브랜드의 이미지 강도를 객관적이고 저비용으로 얻는 방법을 찾는 것을 목적으로 한다. 제안하는 방법은 장소 브랜드 이미지를 구성하고 있는 요인과 그 키워드들을 관련 웹문서에서 추출하며, 추출된 정보를 통해 특정 장소의 브랜드 이미지 강도를 측정하는 방법이다. 성능은 안홀트 방법에서 평가에 사용하는 전세계 50개 도시 이미지 인덱스 순위와의 일치도로 검증하였다. 성능 비교를 위해 임의로 순위를 매기는 방법, 안홀트의 설문방식대로 일반인이 평가하는 방법, 본 논문의 방법을 사용하되 안홀트의 방법으로 학습한 것으로 유의한 것으로 추정되는 평가 항목만을 반영하는 방법과 비교하였다. 그 결과 제안된 방법론은 정확성, 비용효율성, 적시성, 확장성, 그리고 신뢰성 측면에서 우수함을 보일 수 있었다. 따라서 본 연구에서 제안한 방법론은 안홀트 방식에 상호 보완적으로 사용될 수 있을 것이다. 향후에는 장소 브랜드 이미지를 형성하는 속성 별로 등장횟수를 계산 한 후에 장소 브랜드에 대한 태도, 연상, 그리고 브랜드 자산과의 인과관계를 자동으로 파악할 수 있는 부분까지 구현하고 실증적 실험을 할 예정이다.