• The Journal of Korean Medical History
• /
• v.24 no.1
• /
• pp.9-15
• /
• 2011

Recently, the oriental medicine industry in Korea has faced much hardship, due to the decreasing number of patients. Therefore, it is essential to investigate the reasons why patients are avoiding oriental medicine, because the percentage of people consuming medical service is an important marker that assesses the value of medical service. The researcher(s), based on theories on factors that affect health, health behaviors, and diseases, sought to find reasons why oriental medicine clinics saw a decline in the number of patients. Also, by proposing the problems inside the oriental medicine, I came to the following conclusion. -Because Koreans have low expectations for oriental medicine, they do not consider it as full medical service. Also, when they get sick, they are reluctant to seek oriental medicine because of reasons such as the limits of oriental medicine and check-ups, expensive medical cost, negative perception of oriental medicine, not enough support from the media, the old image of the oriental medicine and the little power the industry has on the society. -Among the inner problems of the oriental medicine community was the limitations that the science face on incurable and chronic diseases in terms of treatment and management, little professionalism, lack of scientific evidence, the attitude of the oriental medicine society, lack of sophistication in research methodology, and limitations in responding to changes in public health and the surroundings. The purpose of medicine is to eliminate the possibility of shortened life and dangers by treatment of diseases and health maintenance. For this to happen, structural and developed medical theories and means of treatment are necessary. The researcher hypothesizes that the problems that the oriental medicine society is facing mainly come from the lack of efforts and ability to provide such necessities.

• The Korean Journal of Applied Statistics
• /
• v.14 no.1
• /
• pp.39-57
• /
• 2001

Categorical data has sometimes misclassification errors. If this data will be analyzed, then estimated cell probabilities could be biased and the standard Pearson X2 tests may have inflated true type I error rates. On the other hand, if we regard wellclassified data with misclassified one, then we might spend lots of cost and time on adjustment of misclassification. It is a necessary and important step to ask whether categorical data is misclassified before analyzing data. In this paper, when data is misclassified at one of two variables for two-dimensional contingency table and marginal sums of a well-classified variable are fixed. We explore to partition marginal sums into each cells via the concepts of Bound and Collapse of Sebastiani and Ramoni (1997). The double sampling scheme (Tenenbein 1970) is used to obtain informations of misclassification. We propose test statistics in order to solve misclassification problems and examine behaviors of the statistics by simulation studies.

• Journal of Korean Society of Transportation
• /
• v.19 no.3
• /
• pp.19-32
• /
• 2001

A parking facility choice model. which can be applied to analyze of the driver's parking behavioral changes in response to the local government's parking policy changes and to predict parking demand by the facility types, is developed. Under the context of the stated preference discrete choice model, socioeconomic variables and parking alternative characteristic variables are introduced as explanatory variables. A parking facility choice model for the shopping trip purpose is derived using multinomial logit model and nested logit model and the stated preference data collected in Taegu metropolitan area. The result shows that the sign of all the estimated parameters are logically consistent and the model's goodness of fit is reasonably good. As a result of the elasticity analysis of the model, the elasticity of parking cost is highest, and the elasticity of walking distance between parking place and the destination is higher than parking place searching and ingress time. This means that the parking places are supplied around the destination in the form of small-size parking place. The findings in this study is expected to provide a fundamental data for various short-term parking policy analyses and for parking facility's demand estimations.

• Tribology and Lubricants
• /
• v.36 no.4
• /
• pp.244-252
• /
• 2020

Materials manufactured by powder metallurgy (PM) are widely used in various applications such as water pump, shock absorber, and airplane components due to the reduction in the cost and weight. In this study, tribological properties of carbon steel subjected by surface treatment were investigated. The main purpose is to increase the strength and improve the tribological properties by reducing pores that formed by PM. Moreover, the surface treatment was carried out at room and high temperatures (RT and HT). The surface roughness of the untreated (NON) and treated (AFTER) samples was measured. It was found that the surface roughness was reduced after both the RT AFTER and HT AFTER compared to RT NON sample. The tribological properties of the samples were performed against bearing steel ball under dry conditions. The friction coefficient of the RT NON samples was reduced by 22% and 56% RT AFTER and HT AFTER, respectively. The wear volume of the RT NON sample was also reduced by 43% and 87% RT AFTER and HT AFTER, respectively. Tribocorrosion tests were also performed and it was found that the surface of the RT AFTER, HT AFTER samples was less corroded compared to RT NON sample. The HT AFTER sample demonstrated a relatively higher corrosion potential in comparison with the RT AFTER samples. Hence, it was confirmed that after surface modification the surface roughness and hardness of the samples were significantly improved resulting in improvement in tribological and tribocorrosion behaviors of PM carbon steel.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.1
• /
• pp.54-63
• /
• 2010

Recently, as the function of largest supplier of biomass for "low carbon green growth", the necessity for systematic management of afforestation areas is emphasizing. The forestation of seedling, besides the afforestation cost itself, is required some additional follow-up management costs, like mowing and fertilizing of forestation area, and removal of bindweed. The mulching mat for afforestation seedlings is available for rooting of little seedlings as well as initial forestation expenses. Mulching technique is also used to control soil temperature and moisture by covering the surface of ground. In this study, the paper based-mulching film coated with biodegradable polymer and functional additive was specially produced using laboratory bar coater, and analyzed for its degradable behavior. Coating colors were prepared by dissolving PE (polyester) 80 % and PLA(polylactic acid) 20 % in chloroform and finally applied to handsheet prepared by preceding study conditions. Base paper and polymer-coated paper were artificially aged by 2 kinds of degradation methods, which are soil degradation by microorganism and light degradation by 257 nm UV wavelengths. Strength property, oxidation index and morphological property were evaluated by reduction rates of tensile strength, FTIR spectra ratio of carboxyl and carbonyl group and SEM micrograph. As these results, polymer coated-paper was superior to base paper in degradation behaviors, having results with lower reduction rate of strength properties.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.1
• /
• pp.25-33
• /
• 2007

Crowd behaviors on cyber underwater environment are often produced in entertainment contents, such as films and games. It is easy for us to come in contact with the scenes appearing a lot of characters as digital films and animation works are increased gradually, owing to developing of computer graphics. Though the processing a scene of crowd and the behavior system of crowd, related to the processing techniques of crowd behavior in cyber space, have been implemented so far, the research for developing the natural crowd behavior simulator can not be still satisfying. In this paper, we designed a realistic and efficient Fish Schooling Behavior Simulator for the contents production of cyber underwater environment, which showed each type of fish behavior in cyber underwater smartly, and which generated the animating the behavior automatically, reducing the time and cost.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.11
• /
• pp.801-808
• /
• 2013

In the virtual space with the interactive 3D contents, the degree of mental satisfaction is determined by how fully it reflect the real world. There are a few factors for getting the high completeness of virtual space. The first is the modeling technique with high-polygons and high-resolution textures which can heighten an visual effect. The second is the functionality. It is about how realistic represents dynamic actions between the virtual space and the user or the system. Although the studies on the techniques for animating and controlling the virtual characters have been continued, there are problems such that the long production time, the high cost, and the animation without expected behaviors. This paper suggest a method of behavior control of animation by designing the optimized skeleton which produces the movement of character and applying the procedural technique using physical law and mathematical analysis. The proposed method is free from the constraint on one-to-one correspondence rules, and reduce the production time by controlling the simple parameters, and to increase the degree of visual satisfaction.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.1 s.68
• /
• pp.169-180
• /
• 2004

One of the most influential elements is the moment resisting beam-to-column connection vis-a-vis the behavior and cost of multistory steel building frames. Majority of these connections are column flange connections attached to beam frames. This is called strong-axis connection. Another type of moment resisting connection commonly found in building frames is the web axis connection. In this type of connection, the beams are attached to the plane of the column web perpendicularly. It is called the weak-axis beam. and it tends to bend the column at its weak axis. In this study, some of the fundamental behaviors of beam-to-column connections were examined by changing the connection details as weil as comparing them with previous connection details. This study sought to develop the details in the beam-to-column connection in the weak axis for middle- and low-rise steel construction systems.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.19-32
• /
• 1999

In this study, the trip characteristics of workers in the city are systematically analyzed. The trip behaviors and socioeconomic characteristics of workers are analyzed using Person Trip Survey Data of 1988 and 1992 in Taegu Metropolitan area. With the results of behavioral analyses, the daily travel pattern of workers is shown as one tour contained two trips and it is relatively simple and stable. Also the rate using the same mode in a day is Presented as high ratio. So, it can be explained that the choice of worker\`s first trip is fixed his/her travel mode for his/her daily travel mode. Based on these analyses, the mode choice model for workers is developed by applying the Multi-nominal Logit Model with the choice set of bus, taxi, and car. The explanatory variables of this model include sex, age, auto, travel time, and cost. Empirical tests of the model show encouraging results. After that, the temporal transferability of the model is examined by the Pairwise t-test and five indexes far the model of 1988 and 1992. The results of examination are satisfied with each significance level of the explanatory variables and five indexes. Therefore. it can be concluded that the temporal transferability of this model developed in this study is resonable.

• Structural Engineering and Mechanics
• /
• v.40 no.3
• /
• pp.411-429
• /
• 2011

In the past decades, recycling use of demolished concrete was almost limited to the types of recycled coarse aggregate with a size of about 5-40 mm and recycled fine aggregate with a size of about 0-5 mm for concrete structures, and reuse of demolished concrete lumps (DCLs) with a size much larger than that of recycled aggregate, e.g., 50-300 mm, has been limited to roadbed, backfilling materials, or discarded to landfills. Treatment processes of DCLs are much simpler than those of recycled aggregate, leading to less cost and more energy-saving. In the future, the amount of demolished concrete is estimated to be much higher, so reuse of DCLs for concrete structures will become necessary. The objectives of this paper are to document the process of making reinforced concrete beams with DCLs, and to discuss the flexural and shear behaviors of those reinforced DCL beams through an experimental program, which includes three beams filled with DCLs and one conventional beam for investigating the flexural strengths and deformations, and 12 beams filled with DCLs and two conventional beams for investigating the shear strengths and deformations. The authors hope that the proposed concept offers another sustainable solution to the concrete industry.