• 지구물리와물리탐사
• /
• 제13권1호
• /
• pp.24-30
• /
• 2010

본 연구는 시간차 탄성파 탐사에 대한 천부지하구조의 영향을 분석하기 위해 반복적인 수치모형실험을 이용하였다. 수치 실험의 목적은 Otway 분지에 있는 Naylor 지역에서 $CO_2$ 격리를 목적으로 수행 된 현장 실험에서 관찰된 주요한 산란파들을 재생성하는 것이다. 특히, 수포화도를 변화시켜 가면서 상부토양과 심부의 주름진 점토/석회암 경계면의 탄성 성질들의 변화를 관찰하였다. 이러한 실험을 통해서 건기 빛 우기 계절에 행해진 측정치를 모사하였고, 계절의 변화가 탄성파 측정에 미치는 영향을 비반복성 관점에서 평가하였다. 이 영향들에 대한 정량화와 각각의 기여도를 측정하기 위해서 탄성파 파동방정식을 이용한 수치모델링이 수행되었다. 수치모델링 결과는 천부의 점토/석회암의 주름진 경계면에서의 상대적으로 간단한 분산 효과등이 시간차 탐사에 대한 상당한 영향을 미침을 보여주었다. 또한, 상부 토양에서의 포화도의 변화는 심지어 심부의 주름진 경계면보다도 더 탄성파 신호에 잠재적으로 영향을 미칠 수 있다. 현장에서 측정된 반복된 (시간차) 2차원 탄성파탐사 자료들 사이의 정규화원 RMS(Root-mean-square) 차이와 수치적으로 계산된 차이와의 전체적인 일치는 더 많은 연구가 필요함을 알 수 있다. 향후 진행될 연구는 micro VSP 배영과 매우 조밀한 굴절법 탐사를 이용해서 풍화 지역의 탄성 성질을 현장에서 측정하는 것이다. 본 연구의 결과는 중풍이냐 호주와 같이 카르스트 지형으로 생산에 어려움이 따르는 지역의 석유 생산 영상화와 같은 $CO_2$ 지중격리와 상관이 없는 분야에도 효과가 있을 것이다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.8.2-8.2
• /
• 2011

This talk demonstrates diverse patterned structures utilizing in-situ self-organization and phase separation of the materials into an ordered fashion. The patterned structures in this talk include electrospun nanofibers and electrosprayed microparticles embedding small particles. The positions of the small particles are in-situ controlled during the electrohydrodynamic process by the interaction with the polymer matrix. Another topic of the talk includes selective deposition of spin-coated materials on a corrugated surface that was prepared by buckling of polymer thin films. Solution are strong tendency to be positioned in the trench area of the surface, which facilitates the fabrication of micropatterns of diverse materials.

• 대한기계학회논문집B
• /
• 제22권7호
• /
• pp.899-904
• /
• 1998

Surface motion of a magnetic fluid is studied by a linear stability analysis. When a thin horizontal magnetic-fluid layer is placed on a nonmagnetic substrate, with a vertical magnetic field applied, the surface of the ferrofluid layer can be severely corrugated, due to the normal-field instability. Based on conservation laws, it is shown that the normal-field instability of thin ferrofluid layers is a long-wave instability and that it is analogous to the interfacial mode of the thermocapillary instability in a thin horizontal layer heated from below.

• 펄프종이기술
• /
• 제38권5호
• /
• pp.66-73
• /
• 2006

The effects of active packaging on the surface stiffness, mass, volume, density and weight changes of fresh as well as stored eggplant were studied at 11 and $25^{\circ}C$ for 10 days with active packaging material Type 1 and 2 and control. Mass, volume, and surface stiffness of eggplant decreased linearly throughout the storage period regardless of storage conditions; while the mass density showed a reverse trend in the ease of $11^{\circ}C$ storage. Reduction rate of mass, mass density and weight was observed minimum at $25^{\circ}C$ storage temperature with active packaging Type 1. The weight of eggplant decreased at a higher rate in the initial 4 days compared to that in the later period of storage regardless of storage temperature and type of packaging.

• Journal of the Korean Wood Science and Technology
• /
• 제32권6호
• /
• pp.50-56
• /
• 2004

This study was conducted to investigate the performance of sound absorption type-noise barriers manufactured with a combination of wood particles used for particleboard, recycled waste newspaper, and cement. An average density of wood-combined cement board was in the range from 0.83 to 0.96 g/cm³, showing relatively low-density board. Regardless of types of cement bonded board or wooden board, the board with concave holes(凹)-formed surfaces showed greater sound absorption coefficient compared to those of flat surface boards. The board density was not related with those coefficients. Accordingly, it was concluded that concave or deep corrugated surface structure has played an important role in sound absorption for the application of sound absorption type-noise barrier.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.339-344
• /
• 2001

The present study investigates convective heat/mass transfer and flow characteristics in wavy ducts of primary surface heat exchanger. Experiments using a naphthalene technique are carried out to determine the local transfer characteristics for flow in the corrugated wall duct. The aspect ratios of the rectangular duct cross-section are 7.3, 4.7 and 1.8 with a corrugation angle of $145^{\circ}$. The Reynolds numbers, based on the duct hydraulic diameter, are ranged from 1000 to 5000. The local heat/mass transfer measurement is conducted in the spanwise directions. The results show that Tayler-Gortler vortices exist on the pressure surface. Flow separation on the suction surface appears at a high Reynolds number resulting in a sharp decrease in the local transfer rates, but relatively high transfer rates are obtained in the reattachment region.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권8호
• /
• pp.1239-1250
• /
• 2004

This research was concerned with the enhancement of heat transfer by surfactant added to the aqueous solution of LiBr. Different vertical tubes were tested with and without an additive of normal octyl alcohol. The test tubes are a bare inner surface. a groove inner surface, a corrugated inner surface and a spring inserted inner surface tubes. The additive concentration was about 0.08 mass%. The heat transfer coefficient was measured as a function of the film Reynolds number in the range of 20~200. Experiments were carried out at higher cooling water temperature of $35^{\circ}C$ to simulate an air cooling condition for several kinds of absorber testing tubes. The experimental results were compared with and without surfactant. The enhancement of heat transfer by Marangoni convection effect which was generated by addition of the surfactant is observed in each test tube. Especially, it is clarified that the tube with an inserted spring has the highest enhancement effect.

• 대한기계학회논문집B
• /
• 제25권5호
• /
• pp.666-672
• /
• 2001

Experiments have been carried out to investigate the evaporation heat transfer characteristics of various tubes on which hydrophilic surface treatment using plasma was employed. Spiral, corrugated and low-finned tubes were selected as test tubes. The evaporator tubes were bundled to form three rows of tubes connected in series, with each row being 400mm long. The results obtained indicate that hydrophilic treated tubes tested exhibit better evaporation heat transfer performance as compared with untreated tubes. It is found that the high wettability of the surface obtained through hydrophilic treatment induces film flow onto the tubes during the evaporation process, while sessile drops are formed on untreated tubes.

• Computers and Concrete
• /
• 제21권3호
• /
• pp.279-289
• /
• 2018

Hydration heat and thermal induced cracking have always been a fatal problem for massive concrete structures. In order to study a massive reinforced concrete wall of a storage tank for liquefied natural gas (LNG) during its construction, two mock-ups of $0.8m{\times}0.8m{\times}0.8m$ without and with metal corrugated pipes were designed based on the actual wall construction plan. Temperature distribution and strain development of both mock-ups were measured and compared inside and on the surface of them. Meanwhile, time-dependent thermal and mechanical properties of the concrete were tested standardly and introduced into the finite-element (FE) software with a proposed hydration degree model. According to the comparison results, the FE simulation of temperature field agreed well with the measured data. Besides, the maximum temperature rise was slightly higher and the shrinkage was generally larger in the mock-up without pipes, indicating that corrugated pipes could reduce concrete temperature and decrease shrinkage of surrounding concrete. In addition, the cooling rate decreased approximately linearly with the reduction of heat transfer coefficient h, implying that a target cooling curve can be achieved by calculating a desired coefficient h. Moreover, the maximum cooling rate did not necessarily decrease with the extension of demoulding time. It is better to remove the formwork at least after 116 hours after concrete casting, which promises lower risk of thermal cracking of early-age concrete.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.91-98
• /
• 2016

Linerboards have been produced by recycling recovered paper such as old corrugated containers(OCC). Usually linerboards produced during summer season show weak strength compared with those of produced during winter. In order to cope with the weak strength of linerboards produced during summer, and to confirm uniform quality, it is important to understand the seasonal effect on strength properties. Effect of pulping temperature of the OCC for linearboard production was investigated by controlling pulping temperatures at $18^{\circ}C$ and $51^{\circ}C$. Low pulping temperature ($18^{\circ}C$) caused more generation of fines in stock. Consequently retention and drainage of linerboard defibrated at high pulping temperature ($51^{\circ}C$) were better than those of $18^{\circ}C$. Strength properties of handsheet at low pulping temperature were higher than those of high pulping temperature and it could be confirmed that low pulping temperature during winter is one reason of seasonal variation of recycled linerboard strength. It is considered that surface modification of OCC fibers by harsh pulping action during winter caused increase of paper strength.