• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.39.1-39.1
• /
• 2009

NiTi alloy is widely used innumerous biomedical applications (orthodontics, cardiovascular, orthopaedics, etc.) for its distinctive thermomechanical and mechanical properties such as shape memory effect, super elasticity, low elastic modulus and high damping capacity. However, NiTi alloy is still a controversial biomaterial because of its high Ni content which can trigger the risk of allergy and adverse reactions when Ni ion releases into the human body. In order to improve the corrosion resistance of the TiNi alloy and suppress the release of Ni ions, many surface modification techniques have been employed in previous literature such as thermal oxidation, laser surface treatment, sol-gel method, anodic oxidation and electrochemical methods. In this paper, the NiTi was electrochemically etched in various electrolytes to modify surface. The microstructure, element distribution, phase composition and roughness of the surface were investigatedby scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry(EDS), X-ray diffractometry (XRD) and atomic force microscopy (AFM). Systematic controlling of nano and submicron surface features was achieved by altered density of hydro fluidic acid in etchant solution. Nanoscale surface topography, such as, pore density, pore width, pore height, surface roughness and surface tension were extensively analyzed as systematical variables.Importantly, bone forming cell, osteoblast adhesion was increased in high density of hydro fluidic treated surface structures, i.e., in greater nanoscale surface roughness and in high surface areas through increasing pore densities.All results delineate the importance of surface topography parameter (pores) inNiTi to increase the biocompatibility of NiTi in identical chemistry which is crucial factor for determining biomaterials.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.31-41
• /
• 2016

본 연구에서는 발전소 응축기를 모사할 수 있는 프로그램을 개발하고 발전소 응축기에 전열 촉진관 적용시 얻을 수 있는 여러 효과에 대하여 검토하였다. 평활관을 촉진관으로 교체한다면, 전열량의 증가에 따른 수증기 응축 온도가 내려가게 되므로 발전소의 효율이 증가하게 된다. 따라서 촉진관을 사용하면 기존 설비를 그대로 두고서도 상당량의 전력 여유도를 확보할 수 있다. 고려된 전열 촉진관은 외경 22.2 mm 티타늄 재질의 코류게이트 관, 리브 조도 낮은 핀관, 삼차원 조도 낮은 핀관이다. 내측 조도의 경우 최적 조도 높이가 존재하였다. 또한 삼차원 조도 낮은 핀관이 다른 두 형상보다 우수하게 나타났다. 삼차원 조도의 경우 원주 방향으로 인접한 딤플 사이에서 흐름 방향으로 선회류가 유발되고 이 선회류에 의하여 열전달이 촉진되기 때문이다. 600 MW 발전소 응축기에 전열 촉진관을 적용하면 0.5 MW~1.3 MW 가량의 추가 전력을 생산할 수 있다. 또한 냉각수 온도가 올라가면 추가 전력도 증가한다. 실제로 발전소 응축기에 적용하기 위해서는 열 성능 외에도 화울링, 부식, 기계적 특성 등이 고려되어야 한다.

• 한국가스학회지
• /
• 제13권3호
• /
• pp.1-6
• /
• 2009

최근 화학 산업이 발전함에 따라 고압설비가 널리 이용되고 있다. 이러한 고압 설비는 편리성과 함께 많은 위험을 내포하고 있다. 파열판 안전장치는 고압설비의 안전사고로부터 설비와 생명을 보호하는 장치이다. 파열판 안전장치는 홀더, 파열판, 버큠서포트로 구성되어져 있으며, 다양한 환경 조건에서 부식되거나 파괴되는 단점이 있다. 본 논문에서는 부식 저항성이 우수하여 파열판 안전장치의 소재로 많이 사용되고 있는 STS 316L stainless steel 소재를 이용해서 제작한 파열판 안전장치를 CATIA V5를 이용하여 3차원 모델링을 수행하고, 유한요소해석을 통하여 소재의 두께와 높이에 따라 파열판 안전장치의 파열에 영향을 미치는 요인을 분석하였다.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.17-25
• /
• 1998

Aluminum alloys have low density, relatively high strength and yield strength, good plasticity, good machinability, and high corrosion and acid resistance. Therefore, they are suitable for large containers for the food, chemical and other industries. Large containers are often bodies of revolution consisting of shell courses, stiffening rings, heads and other elements joined by annular welds. Larger containers have longer welds and require greater leak-tightness and higher weld mechanical properties. The LNG tank consists of aluminum plates with various sizes, so its construction should by divided by several sections. Moreover, each section has its own sub-section consisted of several aluminum plates. To guarantee the quality of huge LNG tank, therefore, the precise control of plate dimension should by urgently needed in conjunction with the appropriate selection of process parameters such as cutting speed, depth of cut, rotational speed and so on. In this paper, a manufacturing system was developed to implement automatic circular tracking in height direction and automatic circular interpolation in depth of cut direction. Also, the neural network based on the backpropagation algorithm was used to predict the cutting quality and motor load related with the life time of the developed system. It was revealed that the manufacturing system and the neural network could be effectively applied to the bevelling process and to predict the quality of machined area and the motor load.

• 동굴
• /
• 제56권
• /
• pp.15-38
• /
• 1998

Biomass and soil properties of plant communites was investigated in the limestone ares, Tanyang, Ch'ungbuk Province in Korea. Plants was classified in calcicoles and calcifuges within plant communities occurring in the limestone area. Biomass of plant populatins in the limestone area was measured that Stellaria aquatica was the lowest(0.58g/plant), Chrysanthemum boreale was the highest(8.87g/plant) and that Pennisetum alopecuroides, Miscanthus sinensis was 6.67g/plant, 5.76g/plant, respectively. Diameter of breast height among the tree layer communities was investigated that Pinus densiflora was the widest(20cm), Juniperus rigida was the narrowest(6cm) and that Quercus aliena, Populus ${\times}$ tomentiglandulosa was 10cm, 12cm, respectively. The high of density in the tree layer was found out Populus ${\times}$ tomentiglandulosa, Juniperus rigida, Quercus aliena, Pinus densiflora in this order. Dominant species in the study area were Pinus densiflora, Quercus aliena, Juniperus rigida, Quercus dentata in the tree layer, Lespedeza bicolor, Buxus microphylla, Rhus chinensis in the shrub layer, Humulus Japonicus, Erigeron canadensis, Xanthium strumarium, Oenothera odorata Persicaria hypropiper on the riverside, Pennisetum alopecuroides, Vicia amoena, Chrysanthemum boreale on the roadside. Soil properties of the limestone area was investigated around the protrusion of rock in the upper region, around the cave and underlayer accumulated by corrosion in the study area. Lime-chlorosis was observed in the upper region, underlayer and around the cave. It was observed that biota of kum-gul and dungbong-gul was Rhinolophus ferrumequinum korai, Epanerchodus kimi, Antrokoreana gracilipes, Diestrammena japonical. Dominant species were Humulus japonicus, Stellaria aquatica, Hydrocotyle maritima, Phragmites communis, Miscanthus sinensis around the inlet of a kum-gul. It was classified that plants in the study area was 34 order, 53 family, 135 species in all. Calcicoles were 11 order, 16 family, 18 species and calcufuges were 6 order, 8 family, 11 species of them all.

• Steel and Composite Structures
• /
• 제46권2호
• /
• pp.175-193
• /
• 2023

Stainless steel-concrete composite beam has become an attractive structural form for offshore bridges and iconic high-rise buildings, owing to the superior corrosion resistance and excellent ductility of stainless steel material. In a composite beam, stainless steel shear connectors play an important role by establishing the interconnection between stainless steel beam and concrete slab. To enable the best use of high strength stainless steel shear connectors in composite beams, high strength concrete is recommended. To date, the application of stainless steel shear connectors in composite beams is still very limited due to the lack of research and proper design recommendations. In this paper, a total of seven pushout specimens were tested to investigate the load-slip behaviour of stainless steel shear connectors. A thorough discussion has been made on the differences between stainless steel bolted connectors and welded studs, in terms of the failure modes, load-slip behaviour and ultimate shear resistance. In parallel with the experimental programme, a finite element model was developed in ABAQUS to simulate the behaviour of stainless steel shear connectors, with which the effects of shear connector strength, concrete strength and embedded connector height to diameter ratio (h/d) were evaluated. The obtained experimental and numerical results were analysed and compared with existing codes of practice, including AS/NZS 2327, EN 1994-1-1 and ANSI/AISC 360-16. The comparison results indicated that the current codes need to be improved for the design of high strength stainless steel shear connectors. On this basis, modified design approaches were proposed to predict the shear capacity of stainless steel bolted connectors and welded studs in the composite beams.

• 생물환경조절학회지
• /
• 제23권2호
• /
• pp.148-157
• /
• 2014

본 연구는 농가들의 온실 유지관리 실태를 알아보기 위해서 국내에 보급되어 있는 온실에 대해 전국을 대상으로 온실규격, 자연재해 예방 및 피해상황, 온실 구조재, 온실 피복재 등에 관한 실태를 조사하여 자료를 분석하였다. 그 결과를 요약하면 다음과 같다. 온실의 규격의 경우, 길이는 단동 및 연동 온실 모두 90m이상이 가장 많았다. 폭은 단동온실 및 연동 온실이 각각 8m이상 및 7.0~7.9m, 측고 1.5~1.9m 및 2.0~2.9m, 동고 3.0~3.9m 및 6m가 가장 높은 비율을 차지하는 것으로 나타났다. 내재해형 온실을 조사한 결과 농가에서 내재해형 온실 설치를 기피하는 것으로 조사되었다. 온실의 자연재해 피해는 대설 보다 태풍에 대한 피해를 많이 받는 것으로 조사되었다. 자연재해 예보 시 점검사항의 경우, 태풍 예보가 있을 때에는 천창, 측창, 출입문 및 피복재 고정밴드를 주로 점검하며, 대설 예보가 있을 때에는 난방기를 주로 점검하는 것으로 나타났다. 온실파이프에 부식이 발생 시 보수방법은 도색 보다는 부분적인 교체를 많이 하고, 자연재해 예방을 위한 구조물의 보강재를 대부분 사용하지 않는 것으로 나타났다. 온실 피복재의 유지관리는 대부분의 농가에서 피복재 밀폐성을 점검하는 것으로 나타났지만, 광 투과를 위한 피복재의 청소는 대부분 하지 않는 것으로 나타났다. 태풍시 온실 피복재를 제거하면 구조재 파괴를 막을 수 있는데 그렇게 못하는 이유는 피복재의 교체비용, 재배작물 때문인 것으로 파악되었다. 그리고 온실농가에서 화재예방을 위한 소방설비 구비 여부에 대해 조사한 결과, 온실의 화재예방 인식이 많이 부족한 것으로 나타났다.

• 한국자동차공학회논문집
• /
• 제22권5호
• /
• pp.20-28
• /
• 2014

The high velocity oxygen fuel spraying (HVOF) is a kind of surface modification process technology to form the sprayed coating layer after spraying the powder to molten or semi-molten state by the ultra-high speed at the high-temperature heat source and conflicting with a substrate. It is desirable to melt completely the thermal spray powder in order to produce the coating layer with an optimal adhesion, however, because a semi-molten powder in a spray process has the low efficiency and become a factor that degrades the mechanical property by the inducement of pore-forming within the coating layer. To improve the wear resistance, corrosion resistance and heat resistance, in this study, the plungers of high-speed and ultra-high pressure reciprocating hydraulic pumps for oil and water used in ironwork are produced with $420J_2$ and the coating layers of plungers are formed by the powders of WC-Co-Cr and WC-Cr-Ni including the high hardness WC. The surface of these plungers is modified by the super-mirror face grinding machine using variable air pressure developed in this laboratory, and then the characteristics of cross-sectional microstructure, and surface roughness and hardness values between no operation and 100 days-operation are examined and made a comparison. The fine tops and bottoms on surface roughness curve of oil-hydraulic pump plunger sprayed by WC-Cr-Ni are molded more and higher than those of water-hydraulic pump sprayed by WC-Co-Cr because the plunger diameter of oil-hydraulic pump is 0.4 times smaller than that of water-hydraulic pump and the pressure of oil-hydraulic pump exerted on the plunger is operated with the 70 bars higher than that of water-hydraulic pump. As a result, it is found that the values of centerline average surface roughness and maximum height for oil-hydraulic pump plunger are bigger than those of water-hydraulic pump plunger.

• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.285-293
• /
• 2016

The high velocity oxygen fuel(HVOF) thermal spray is a kind of surface modification techniques to produce the sprayed coating layer. This process is to form the coating layer after spraying the powder to molten or semi-molten state by the ultra-high speed at the high-temperature heat source and conflicting with a substrate. The efficiency of thermal spraying is dropped, however, because the semi-molten powder in a spray process become a factor that degrades the mechanical property by the formed pore within the coating layer. Therefore, it is necessary to melt completely the thermal spray powder in order to produce the coating layer with an optimal adhesive force. In this study, to improve the wear resistance, corrosion resistance and heat resistance, the plungers of high-speed and ultra-high pressure reciprocating hydraulic pumps used in ironworks are manufactured with STS $420J_2$ and are coated by the powders of WC-Co-Cr and WC-Cr-Ni including the WC of high hardness using a HVOF thermal sprayer developed in this laboratory. These are called by the surface-modified plungers. The surface roughness, hardness, and surface and cross-sectional microstructure of these two surface-modified and conventional ceramic plungers are measured and compared before operation with after operation for 100 days. It is found that the values of centerline average surface roughness and maximum height for conventional ceramic plunger are 9.5 to 10.8 and 5.2 to 5.7 times higher than those of surface-modified ones coated by WC-Co-Cr and WC-Cr-Ni because the fine tops and bottoms on surface roughness curve of conventional ceramic plunger are approximately 100 times higher than those of surface-modified ones. In addition, the pores and scratches in the surface microstructure are considerably formed in the order of conventional ceramic, WC-Cr-Ni and WC-Co-Cr surface-modified plungers. The greater the WC content of high hardness powder is less the change in the plunger surface.

• 한국도서관정보학회지
• /
• 제35권3호
• /
• pp.79-94
• /
• 2004

이 연구는 1995년 장흥 보림사의 사천왕상에서 발굴된 복장불서 가운데 보물 제745-9호로 지정된 $\boxDr$금강경삼가해$\boxUl$를 대상으로 서지학의 관점에서 지류문화재의 보수 및 보존처리 과정을 다룬 연구 논문이다. 보존처리 전 형태적 특징을 보면, 책의 크기는 가로 25.3 cm, 세로 38.9cm 두께 1.5cm 전체 면수는 58장, 지질은 황갈색의 고정지로 확인되었다. 보존처리 전 $\boxDr$금강경삼가해$\boxUl$의 상태는 사천왕문의 열악한 환경으로 인하여 사천왕상에 빗물이 스며듦으로서 책의 바깥부분에 해당하는 장은 비교적 오염이 심한 상태일 뿐만 아니라 일부 장은 갈색으로 부식이 진행되고 있는 상태이며, 전체적으로 판심의 하어미와 서근 부분이 일정한 모양으로 박락 현상을 보이고 있음이 확인되었다. $\boxDr$금강경삼가해$\boxUl$의 보존처리를 하는데 있어서 수리방침의 주안점은 본지의 현상 유지를 우선원칙으로 삼되, 반드시 후세에 재수리가 가능하도록 수리방침을 설정하고 그에 따른 세부방침을 정하였다. $\boxDr$금강경삼가해$\boxUl$의 보존처리 과정은 1) 제1차 세척과정, 2) 판본 보완 및 보수 과정, 3) 제2차 세척 및 보존처리 과정, 4) 재단 및 제책과정, 서투 및 표갑의 제작 등으로 나누어 실행하였다. $\boxDr$금강경삼가해$\boxUl$의 수리 결과, 수리 전 책의 외형은 가로 25.3cm 세로 38.9cm 두께 1.5cm, 판본 58장(본문 57장, 보조지 1장)이었으나, 수리 후 가로 25.8cm, 세로 39.4cm, 책의 두께는 1.9cm, 판본 64장(본문 57장, 보조지 1장, 겉표지 앞과 뒤 각1장, 보호지 앞과뒤 각2장)으로 가로 0.5cm, 세로 0.5cm, 두께 0.4cm, 판본 6장이 증가하는 등의 외형적 변화가 발생하였다.