• Journal of Advanced Marine Engineering and Technology
• /
• 제26권3호
• /
• pp.375-381
• /
• 2002

Measuring of the dissolved oxygen is widely used for the environmental control of natural waters, sewage waste treatment, medical and biochemical studies, soil husbandry, food and drug process control, and prevention of corrosion in boilers. Especially, a power plants need special management for preventing accidents from corrosion, therefore, it is essential to measure the concentration of dissolved oxygen in real-time. In this paper we present a method of measuring dissolved oxygen very accurately up to pub units. This method, called polarograph method, is based on the measures of the electric current generated by the oxidation process in cathode and de-oxidation process in anode, assuming that the amount of the current is proportional to the density of dissolved oxygen.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.197-201
• /
• 2001

Measuring of the dissolved oxygen is widely used for the environmental control of natural waters, sewage waste treatment, medical and biochemical studies, soil husbandry, food and drug process control, and prevention of corrosion in boilers. Especially, a power plants need special management for preventing accidents from corrosion, therefore, it is essential to measure the concentration of dissolved oxygen in real-time. In this paper we present a method of measuring dissolved oxygen very accurately up to ppb units. This method, called polarographic method, is based on the measures of the electric current generated by the oxidation process in cathode and de-oxidation process in anode, assuming that the amount of the current is proportional to the density of dissolved oxygen.

• 한국전기전자재료학회논문지
• /
• 제20권11호
• /
• pp.1000-1003
• /
• 2007

The molten carbonate fuel cell has conspicuous feature and high potential in being used as an energy converter of various fuel to electricity and heat. However, the molten carbonate fuel cell which use strongly corrosive molten carbonate at $650^{\circ}C$ have many problem. One of the material problems is the severe corrosion of the metallic components, such as the separator. The effect of coating and annealing treatment on the corrosion for SUS 304 and SUS 430 which are the candidate materials for molten carbonate fuel cell hardware has been investigated in molten carbonate at $650^{\circ}C$ by using steady state polarization and electrochemical impedance spectroscopy method. It was found that the corrosion current of these SUS 304 and SUS 430 decreased with coating and annealing treatment.

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.250-255
• /
• 2019

Poly(ethylene oxide) (PEO)-based solid polymer electrolytes (SPEs) show promise for improving the lithium ion battery safety. However, due to oxidation of the PEO group and corrosion of the Al current collector, PEO-based SPEs have not previously been effective for use in $LiCoO_2$ (LCO) cathode materials at room temperature. In this paper, a semi-interpenetrating polymer network (semi-IPN) PEO-based SPE was applied to examine the performance of a LCO/SPE/Li metal cell at different voltage ranges. The results indicate that the SPE can be applied to LCO-based lithium polymer batteries with high electrochemical performance. By using a carbon-coated aluminum current collector, the Al corrosion was mostly suppressed during cycling, resulting in improvement of the cell cycle stability.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권5호
• /
• pp.58-68
• /
• 2000

When SS400 steel was welded with low hydrogen type and ilmennite type welding, the effect of post-weld heat treatment(PWHT) was investigated with parameters such as micro vickers hardness, corrosion potential, polarization behaviors, galvanic current, Al anode generating current and Al anode weight loss etc. Hardness of each parts(HAZ, BM, WM) by PWHT in case of low hydrogen type and ilmennite type welding was lower than that of each parts by As-welded However hardness of WM area in case of low hydrogen type and ilmennite type welding was the highest among those three parts regardless of PWHT, Whereas in case of ilmennite type welding, WM area was the highest potential among these three parts on galvanic potential series with As-welded while BM area was the highest potential among these three parts by PWHT on the contrary. And in case of low hydrogen type welding, galvanic corrosion and micro cell corrosion of welding parts was decreased with PWHT. However, It was increased with PWHT in case of ilmennite type welding. Moreover Al anode generating current and anode weight loss in case of low hydrogen type was decreased by PWHT compared to As-wedled but, which was increased than that of As-welded in case of ilmennite type welding. Therefore, it is suggested that Corrosion resistance property in case of low hydrogen type welding is increased by PWHT. However its property was devreased with PWHT in case of ilmennite type welding.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.435-450
• /
• 2021

The interest in eco-friendly energy is increasing, and polymer electrolyte membrane fuel cell (PEMFC) is attracting attention as alternative power sources. Research on metallic bipolar plates, a fuel cell component, is being actively conducted. However, since the operating conditions of PEMFC, in which sulfuric acid (H₂SO₄) and hydrofluoric acid (HF) are mixed, are strong acidity, the durability of the metallic bipolar plate is very important. In this research, the electrochemical characteristics and corrosion damage behavior of 316L stainless steel, a material for metallic bipolar plates, were analyzed through potentiostatic corrosion tests with test times and chloride concentrations. As the test times and chloride concentrations increased, the current density and corrosion damage increased. As a result of observation with scanning electron microscope(SEM) and 3D microscope, both the depth and width of pitting corrosion increased with increases in test times and chloride concentrations. In particular, the pitting corrosion damage depth at test conditions of 6 hours and 1000 ppm chloride increased the most. The growth of the pitting corrosion damage was not directly proportional to time and increased significantly after a certain period.

• 공업화학
• /
• 제9권5호
• /
• pp.667-673
• /
• 1998

염분이 함유된 콘크리트 모사 세공용액 중에서의 철근 부식반응을 Tafel 분극법과 교류 임피던스법에 의해 비교 고찰하였으며, 철근 표면의 거칠기와 산화피막층에 의한 부식거동을 연구하였다. 전기화학적 교류 임피던스법에 의한 철근부식의 진단은 매우 유용하며, 제안된 모델과 실험결과가 잘 일치하였다. 염분농도가 증가할수록 부식전위는 cathodic-방향으로 이동하여 부식확률이 증가하였으며, 부식전류도 동일한 양상을 보였다. 철근 표면의 산화피막은 주사전자현미경과 AES (Auger electron spectroscopy)로 분석하였다. Torch로 15초간 열처리하여 형성된 철근표면의 산화피막은 오히려 철근부식을 촉진하였으며, 철근 표면의 거칠기가 증가할수록 부식속도는 증가하였다. 또한, 초기 콘크리트 모사세공 용액의 온도 증가는 철근 부식속도의 증가를 가져왔다.

• Corrosion Science and Technology
• /
• 제7권1호
• /
• pp.35-39
• /
• 2008

We have been studying application of electrochemical noise (Fluctuation) analysis for localized corrosion. Foils of Zinc, Aluminum and Magnesium were used as specimens for electrochemical cell simulating localized corrosion. These specimens were dipped in sodium chloride solutions adjusted to each exponent of Hydrogen ion concentration (pH) condition of 5.5, 10, 12 respectively. Time variations of potential and current were measured in those solutions, and simultaneously the surfaces of specimens were observed using microscope with television monitor. Two types of electrochemical cells were arranged for experiments simulated localized corrosion. The fluctuations on trendy component of short-circuited potential and short-circuited current were appeared in synchronization. It was seemed that these fluctuations result from hydrogen evolution on the aluminum active site in the crevice from the microscopic observation. In the case of zinc and magnesium, fluctuations appeared on the trendy component of the corrosion potential. Two types fluctuation were detected. First one is the fluctuation varied periodically. The second one is the random fluctuation. It was seemed that these fluctuations result from generation of corrosion products and hydrogen evolution on the active site in the crevice of zinc and magnesium from the microscopic observation.

• 콘크리트학회지
• /
• 제9권6호
• /
• pp.175-183
• /
• 1997

경제성장에 따른 항만구조물의 건설 및 유지관리에 관한 관심이 급격히 고조되고 있다. 이러한 항만구조물은 해양환경에 노출되어 콘크리트에 매입된 철근의 부식을 야기시키는 요인에 접해있다. 한편, 콘크리트 내부의 염분침투는 매입철근의 부식을 가속화시켜 콘크리트 구조물의 내구성에 상당히 큰 피해를 입힐 수 있다. 본 연구의 목적은 여러 가지 방식제를 사용함과 동시에 물/시멘트을 달리한 실험변수를 이용한 시험체에 대한 부식평가 및 매입철근의 적절한 부식방지 기법의 개발에 있다. 해양환경 조건을 simulation한 해수 및 담수 순환장치를 이용한 실내 시험체의 철근 부시도 평가 및 항만현장에 직접 거치된 시험체 등 다양한 조건하의 2년간의 실험이 현재 진행 중에 있다. 40주에 걸쳐 간헐 침투되는 해수조건에서 60개의 콘크리트 시험체의 철근 부시도 평가결과를 기초하여 180여개의 콘크리트 시험체를 새로이 제작하여 Half-Cell Test를 통한 Instant-Off Potential, Current Method를 통한 Corrosion current, Chloride Content 및 시험 종료후 시험체를 파쇄하여 부식된 철근의 무게측정등을 통하여 거동 및 부식을 예측.평가하고 이를 통한 부식방지기법을 개발하고자 한다.

• 콘크리트학회지
• /
• 제11권2호
• /
• pp.221-230
• /
• 1999

콘크리트 구조물에 균열이 생겨 물과 산소의 침투확산이 용이해 지거나 또는 외부로부터 염소이온과 같은 염화물이 침투확산되어 콘크리트 중의 철근까지 도달할 경우 및 콘크리트의 중성화가 철근위치까지 진행될 경우 철근의 부동태 피막은 파괴되어 부식이 급진전 되며 콘크리트의 박리 및 탈락현상이 수반될 뿐만 아니라 구조물의 내구성이 크게 저하된다. 본 연구에서는 콘크리트 중의 철근부식을 억제하기 위한 한 방안으로 적용되는 전기방식의 이론적인 고찰과 콘크리트 내부에 다량의 염화물을 함유시키거나 또는 균열을 발생시킨 시험체에 대하여 외부전원법을 활용한 실내실험을 실시하여 철근의 방식효과에 대해 고찰하였다. 외부전원법에 의한 전기방식을 실시하여 복극량을 측정한 결과 대상 시험체 모두 NACE의 방식기준을 만족하였으며, 부식면적율의 측정결과 34 ~84%, 단면감소의 경우 84 ~ 86%의 방식효과를 확인하였다.