• Journal of East-West Nursing Research
• /
• v.6 no.1
• /
• pp.37-45
• /
• 2001

The purpose of this study was to identify the effect of hand acupuncture for reduction of dysmenorrhea. 71 female middle school and high school students were selected as subjects from April to May 2001, among which 38 students consisted of the experimental group while 22 students were the control group by convenient assignment. The experimental group participated in hand acupuncture treatment. The experimental treatment was to puncture corresponding points(A4, A5, J1, J3, J23, H2, F7) on both the palm and back of a hand with disposable acupuncture needles and to remove needles after 20-30 minutes' recess during which the subjects reposed themselves on bed. The collected data were processed using the SPSS PC Program and analyzed using $X^2test$ and The results of this study were as follows 1. The symptoms of premenstrual syndrome have decreased, but no significant differences were statistically observed between hand-acupunctured group and non-hand acupunctured group. 2. Subjective pain degree has decreased after hand acupuncture. 3. As for objective pain degree, a significant reduction in voice change was observed between two groups. Facial expressional changes and perspiration degree reduced but showed no significant statistically changes between two groups. 4. Comfort has increased after hand acupuncture. These results suggest that the hand acupuncture therapy works effectively on easing menstrual pain and symptoms as well as partially on reducing discomfort. It is particularly efficacious for a reduction in subjective pain and facial expressional changes in positive respect. Therefore the hand acupuncture therapy can be considered as an independent nursing intervention for dysmenorrhea reduction.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.95-104
• /
• 1989

This paper presents a new shadow testing acceleration scheme for ray tracing called Hybrid Shadow Testing (HST) based on a conditional switching between the conventinal shadow testing method and Crow's shadow volume method, where the shadow polygons as well as the object polygons are registered onto the corresponding cells under the 3-D space subdivision environment. Despite the preprocessing time for the generation and registration of the shadow polygons, the total shadow testing time of the proposed algorithm, HST was approximately 50% of that of the conventional shadow testing method for several examples while the total ray tracing time was typically reduced by 30% from the conventional approach. This due to the selective use of the shadow volume method with a compromise between the maximal utilisation of shadow's spatial coherency and minimising the computational overhead for checking ray intersections with the shadow polygons. A parameter, $N_{th}$ denoting the critical number of shadow polygons between successive reflection points was used as a guideline for switching the shadow testing scheme between the conventional method and shadow volume method. A method for calculating $N_{th}$ from such statistical data as the number of object polygons, average polygon size average peripheral length of the polygons was proposed, resulting in good agreement with the experimental results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1141-1144
• /
• 2005

In this paper, we propose an automatic displacement system for testing stability of structure. Photogrammetry is a method which can measure accurate 3D data from 2D images taken from different locations and which is suitable for analyzing and measuring the displacement of structure. This paper consists of camera calibration, feature extraction using coded target & retro-reflective circle, 3D reconstruction and analyzing accuracy. Multi-view camera which is used for measuring displacement of structure is placed with different location respectively. Camera calibration calculates trifocal tensor from corresponding points in images, from which Euclidean camera is calculated. Especially, in a step of feature extraction, we utilize sub-pixel method and pattern recognition in order to measure the accurate 3D locations. Scale bar is used as reference to measure. the accurate value of world coordinate..

• The KIPS Transactions:PartB
• /
• v.10B no.3
• /
• pp.339-346
• /
• 2003

In this paper, we propose a new method in which interpolation images are created by using a small number of axiai T2-weighted images instead of using many sectional images for 3D visualization of brain MR images. For image Interpolation, an important part of this process, we first segment a region of interest (ROI) that we wish to apply 3D reconstruction and extract the boundaries of segmented ROIs and MBR information. After the image size of interpolation layer is determined according to the changing rate of MBR size between top slice and bottom slice of segmented ROI, we find the corresponding pixels in segmented ROI images. Then we calculate a pixel's intensity of interpolation image by assigning to each pixel intensity weights detected by cube interpolation method. Finally, 3D reconstruction is accomplished by exploiting feature points and 3D voxels in the created interpolation images.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.27-33
• /
• 2003

The image-based 3D modeling is the technique of generating a 3D graphic model from images acquired using cameras. It is being researched as an alternative technique for the expensive 3D scanner. In this paper, we propose the image-based, 3D modeling system using calibrated stereo cameras. The proposed algorithm for rendering, 3D model consists of three steps, camera calibration, 3D reconstruction, and 3D registration step. In the camera calibration step, we estimate the camera matrix for the image aquisition camera. In the 3D reconstruction step, we calculate 3D coordinates using triangulation from corresponding points of the stereo image. In the 3D registration step, we estimate the transformation matrix that transforms individually reconstructed 3D coordinates to the reference coordinate to render the single 3D model. As shown the result, we generated relatively accurate 3D model.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.1
• /
• pp.25-36
• /
• 2017

Purpose: The analysis of space configuration of dentistry through examining Korean dental history and comparison are necessary for the development of planning of the dental healthcare system. This study has been started in order to provide basic information for the planning of hospital architecture in dentistry. Methods: Literature review of space configuration and historical background in dentistry have been conducted. The changes of site plan and space configuration of Seoul National University, Yonsei University and Kyunghee University, School of Dentistry and Dental Hospital have been analyzed in dental history of Korea and corresponding spaces. Results: The result of this study can be summarized in three points. The first one is that space configuration of dentistry in Korea is different from that of West. The clinical treatment space had been started first and the education and research space was followed after a short interval. The second one is that the space configuration in School of Dentistry and Dental Hospital shows that dental space had differentiated and specialized to dental education and clinical space in a building. It had spatially divided and separated to the education and research complex and the dental hospital and it had a branch building. The third one is that the dental public health in Korea has not been actively applied until recently and it should be developed in a near future. Implications: It is necessary to analyze space configuration of other dental schools and their hospitals to develop the relationship between space and program in healthcare system.

• Fire Science and Engineering
• /
• v.31 no.4
• /
• pp.71-79
• /
• 2017

A rack warehouse with a vertically loading type and high loading density has severe risks and damage during its fire. In this regard, US and Japan strive to minimize the fire spread by applying in-rack sprinkler, horizontal barriers, etc. corresponding to their own rack warehouse but there is no study and policy in Korea. Therefore, a model scale fire test was carried out targeting the standard rack incorporating the national rack warehouse in order to check fire characteristics in ignition points and installation distances of horizontal barriers in this study. As a result of the test, vertical fire spread of about 30% was inhibited by narrowing its installation distance from 2-layer to 1-layer in an ignition condition of the flue space. In addition, as a result of the measurement of the temperature in the upper and lower parts of the horizontal barrier, the temperature distribution showed about 2~4 higher in a condition with an installation of the barrier than that in the condition without the barrier. Consequently, it is likely that the horizontal barrier will help the initial operation of in-rack sprinkler.

• Journal of Korea Multimedia Society
• /
• v.5 no.1
• /
• pp.18-27
• /
• 2002

A hierarchical representation scheme for planar curves, MBO-tree, is proposed in this paper, which provides natural approximation and efficient localization. MBO-tree is based on the Douglas-Peucker algorithm (iterative end-point fit algorithm), but approximation errors that are stored with corresponding points in MBO-tree nodes and are used for abstraction measures are adjusted by force to eliminate unnatural approximation. The error adjusting is just making the approximation error of a node in a MBO-tree to be less than or equal to that of its parent. In point of localization, the bounding area of a curve is represented with a minimum bounding octangle (MBO), which can enclose the curve more compactly compared with those of other hierarchical schemes, such as the strip tree, the arc tree and the HAL tree. The MBO satisfies the hierarchical inclusion property that is useful for hierarchical geometrical operations, such as the point-inclusion test and the polygon intersection test. Through several experiments, we found that the proposed scheme was able to approximate more naturally and to localize more effectively.

• Korean Journal of Remote Sensing
• /
• v.23 no.4
• /
• pp.273-285
• /
• 2007

Most stereo matching methods use intensity values in small image patches to measure the correspondence between two points. If the noisy pixels are used in computing the corresponding point, the matching performance becomes low. For this reason, the noise plays a critical role in determining the matching performance. In this paper, we propose a method for combining intensity and edge filters robust to the noise in order to improve the performance of stereo matching using high resolution satellite imagery. We used intensity filters such as Mean, Median, Midpoint and Gaussian filter and edge filters such as Gradient, Roberts, Prewitt, Sobel and Laplacian filter. To evaluate the performance of intensity and edge filters, experiments were carried out on both synthetic images and satellite images with uniform or gaussian noise. Then each filter was ranked based on its performance. Among the intensity and edge filters, Median and Sobel filter showed best performance while Midpoint and Laplacian filter showed worst result. We used Ikonos satellite stereo imagery in the experiments and the matching method using Median and Sobel filter showed better matching results than other filter combinations.

• Journal of Plant Biology
• /
• v.27 no.2
• /
• pp.61-72
• /
• 1984

The concept of natural grouping of plant designated as the "Amentiferous" is no longer given serious credence, and many of the families included in this grouping have been dispersed in diverse order. Because a review of taxonomic treatments of amentiferous taxa reveals diverse classifications, it has become necessary to investigate new characteristics and attempt to determine the significance of these characteristics in terms of amentiferous taxonomy. Protein analyses by isoelectrofocusing(IEF) and rocket immunoelectrophoresis(RIE) have proved to be useful in the delicitation of Quercus taxa using pollen extracts from selected taxa. When Quercus pollen extracts were separated by electrophoresis based on their isoelectric points in a stable pH gradient and substrates for estrase activity were stained, ten bands were revealed between pH 5-14. Within Lepidobalanus grouping, a great diversity in the pollen protein zymograms was observed with some segregation corresponding to the designated taxonomic sections. Two taxa of Cyclobalanopsis produced a zymogram that is somewhat similar to taxa included within the section Prinus of Lepidobalanus, and less similar to taxa within the section Cerris of the same subgenus. Three tested taxa of the Cerris are in the similar zymogram each other, being segregable from the taxa of Prinus. Quantitative and qualitative analyses for serological relationships within and among th Quercus were also employed. To calculate the degree of protein similarity, total rocket heights obtained from RIE provided an index of serological correspondence(SC). It is reconfirmed that the Quercus is distantly separated from the Fagus according to SC. Comparative data from rocket number and SC in the tested taxa of Quercus also indicate that Lepidobalanus is separable from Cyclobalanopsis. Within the Lepidobalanus Q. acutissima and Q. acutissima x variabilis are almost homogeneors and distinguishable from the other tested taxa of same subgenus. Although the number of taxa tested has been limited, the overall serological evidence best reflects the classification proposed by Redher(1940) and Melchior (1964), having the genus Quercus subdivided into three subgunera: Erythrobalanus, Lepidobalanus, and Cyclobalanopsis.alanopsis.