• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.985-990
• /
• 2004

Leak noise is a good source to identify the exact location of a leak point of underground water pipelines. Water leak generates broadband noise from a leak location and can be propagated to both directions of water pipes. This sound propagation due to leak in water pipelines is not a non-dispersive wave any more because of the surrounding pipes and soil. However, the necessity of long-range detection of this leak location makes to identify low-frequency acoustic waves rather than high frequency ones. Acoustic wave propagation coupled with surrounding boundaries including cast iron pipes is theoretically analyzed and the wave velocity was confirmed with experiment. The leak locations were identified both by the acoustic emission (AE) method and the cross-correlation method. In a short-range distance, both the AE method and cross-correlation method are effective to detect leak position. However, the detection for a long-range distance required a lower frequency range accelerometers only because higher frequency waves were attenuated very quickly with the increase of propagation paths. Two algorithms for the cross-correlation function were suggested, and a long-range detection has been achieved at real underground water pipelines longer than 300m.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.798-803
• /
• 2004

Leak noise is a good source to identify the exact location of a leak point of underground water pipelines. Water leak generates broadband sound from a leak location and this sound propagation due to leak in water pipelines is not a non-dispersive wave any more because of the surrounding pipes and soil. However, the necessity of long-range detection of this leak location makes to identify low-frequency acoustic waves rather than high frequency ones. Acoustic wave propagation coupled with surrounding boundaries including cast iron pipes is theoretically analyzed and the wave velocity was confirmed with experiment. The leak locations were identified both by the acoustic emission (AE) method and the cross-correlation method. In a short-range distance, both the AE method and cross-correlation method are effective to detect leak position. However, the detection for a long-range distance required a lower frequency range accelerometers only because higher frequency waves were attenuated very quickly with the increase of propagation paths. Two algorithms for the cross-correlation function were suggested, and a long-range detection has been achieved at real underground water pipelines longer than 300m.

• 한국위성정보통신학회논문지
• /
• 제1권1호
• /
• pp.5-11
• /
• 2006

무선인지기술은 환경에 능동적으로 적응하여 스펙트럼 이용을 효율적으로 할 수 있도록 하는 기술이다. 무선인지 기술의 가장 중요한 첫 단계는 센싱 부분으로서 본 논문에서는 주파수 상관관계를 이용한 방법을 제안하였다. 통신신호의 주기적인 특성을 기반으로 잡음과 간섭의 효과를 최소화하기 위해 주파수 상관함수를 사용하였다. 이미 알려진 에너지 측정 방법의 동작특성을 보이고 시뮬레이션을 통하여 제안된 측정 방법과 기존의 방법을 비교하여 무선인지환경을 이용한 스펙트럼 센싱의 효율성을 보인다.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.762-768
• /
• 2010

This paper describes the development of a new islanding detection method for inverter-based distributed generation systems, which uses a signal cross-correlation scheme between the injected reactive current and the power frequency deviation. The proposed method injects 1% of the reactive current to the rated current which brings about a negligible degradation of the power quality. It discriminates the islanding state, when the calculated cross-correlation index is larger than 0.5. The operational feasibility was verified through computer simulations with PSCAD/EMTDC software and experimental research with a hardware prototype. The proposed method can detect the islanding state without degrading the power quality at the point of common connection. Further study is required to overcome the cancellation of the injected reactive current from multiple distributed generation units interconnected with the utility grid.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.327-332
• /
• 2004

Leak noise is a good source to identify the exact location of a leak point of underground water pipelines. Water leak generates broadband noise from a leak location and can be propagated to both directions of water pipes. This sound propagation due to leak in water pipelines is not a non-dispersive wave any more because of the surrounding pipes and soil. However, the necessity of long-range detection of this leak location makes to identify low-frequency acoustic waves rather than high frequency ones. Acoustic wave propagation coupled with surrounding boundaries including cast iron pipes is theoretically analyzed and the wave velocity was confirmed with experiment. The leak locations were identified both by the acoustic emission (AE) method and the cross-correlation method. In a short-range distance, both the AE method and cross-correlation method are effective to detect leak position. However, the detection for a long-range distance required a lower frequency range accelerometers only because higher frequency waves were attenuated very quickly with the increase of propagation paths. Two algorithms for the cross-correlation function were suggested, and a long-range detection has been achieved at real underground water pipelines longer than loom.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.340_341
• /
• 2009

This paper suggests a detection scheme of a secondary arc extinction using the peak value of a fault voltage estimated by correlation algorithms. The system implemented in this paper is based on a Korean 765 kV system and the suggested proposed scheme is tested on the system. The performance of the method is analyzed by using Electro-Magnetic Transients Program (EMTP)/ATPDraw.

• 제어로봇시스템학회논문지
• /
• 제22권8호
• /
• pp.665-670
• /
• 2016

This paper proposes a repeat-back jamming signal detection scheme using a correlation ratio test metric of a combined pseudo-random noise signal for global navigation satellite systems. The correlation ratio test metric allows for the monitoring of possible distortions in the signal correlation. The proposed scheme is a modified version of the correlation ratio test metric to detect a repeat-back jamming signal in a multipath environment. Through a Monte-Carlo simulation, it is confirmed that the proposed scheme detects almost the whole case, which is received a repeat-back jamming signal under the 6 dB jamming to signal power ratio.

• The Journal of Advanced Prosthodontics
• /
• 제9권6호
• /
• pp.432-438
• /
• 2017

PURPOSE. The purpose of this study was to evaluate the in vitro validity of quantitative light-induced fluorescence-digital (QLF-D) and laser fluorescence (DIAGNOdent) for assessing proximal caries in extracted premolars, using digital radiography as reference method. MATERIALS AND METHODS. A total of 102 extracted premolars with similar lengths and shapes were used. A single operator conducted all the examinations using three different detection methods (bitewing radiography, QLF-D, and DIAGNOdent). The bitewing x-ray scale, QLF-D fluorescence loss (${\Delta}F$), and DIAGNOdent peak readings were compared and statistically analyzed. RESULTS. Each method showed an excellent reliability. The correlation coefficient between bitewing radiography and QLF-D, DIAGNOdent were -0.644 and 0.448, respectively, while the value between QLF-D and DIAGNOdent was -0.382. The kappa statistics for bitewing radiography and QLF-D had a higher diagnosis consensus than those for bitewing radiography and DIAGNOdent. The QLF-D was moderately to highly accurate (AUC = 0.753 - 0.908), while DIAGNOdent was moderately to less accurate (AUC = 0.622 - 0.784). All detection methods showed statistically significant correlation and high correlation between the bitewing radiography and QLF-D. CONCLUSION. QLF-D was found to be a valid and reliable alternative diagnostic method to digital bitewing radiography for in vitro detection of proximal caries.

• 한국통신학회논문지
• /
• 제39C권1호
• /
• pp.60-69
• /
• 2014

감시경계 분야에서 진동센서를 이용한 발자국 탐지방안 연구가 지속적으로 이루어지고 있다. 진동센서는 탐지성능은 우수하나 야외 환경에서 사용 시 잡음에 매우 민감하게 반응한다. 본 논문에서는 비선형 주파수 차감 후 기본 발자국 모델 신호와 입력 신호 간의 교차상관을 수행하여 잡음은 감쇄시키고 발자국 신호는 증대시켜 탐지성능을 높일 수 있는 NSSC 방법을 제안한다. 이러한 잡음 제거과정 이후 탐지 이벤트 구간에 대한 식별 과정을 수행함으로써 실제 사람 발자국 여부를 최종 판단한다. 제시된 알고리즘의 성능 검증을 위하여 맑은 날, 비 오는날에 수집된 발자국 신호에 대한 실험 결과를 제시하였다.

• 한국식품과학회지
• /
• 제26권6호
• /
• pp.764-769
• /
• 1994

본 실험은 원유내외 세균을 빠르고, 일관성있고, 신뢰성이 있는 평가 system을 얻기 위함이며, 원유 내외 총균수와 저온성균수, 대장균군수를 malthus의 detection time과 regression equation과 상관관계를 조사하였다. Conductance method는 종래의 plate count method보다빠르고 자동적이며, 노동력을 최대한 절감할 수 있다. 그 결과는 다음과 같다. 1. Conductance detection time을 (Y), total bacterial log count를 (X)라고 할 때 regression equation Y=18.27651-2.07550X, 상관계수는 -0.95(n=201)로 나타났다. 2. Conductance detection time을 (Y), total bacterial log counts를 (X)라고 할때 regression equation Y=9.32048-1.15598X, 상관계수는 -0.90(n=207)로 나타났다. 3. Conductance dotection time을 (Y), psychrotrophic bacterial log counts를 (X)라 할때 regression equation Y=29.96008-3,02487X 상관계수는 -0.90(n=201)로나타났다.