• 대한안전경영과학회지
• /
• 제3권4호
• /
• pp.45-52
• /
• 2001

In order to Investigate water tree degradation behavior on XLPE cable, direct voltage of 200 to 800V has been applied to the material at 5$0^{\circ}C$~10$0^{\circ}C$, and the water tree property has been correlated with voltage and temperature. The leakage current was increase as temperature increased and the Ohm's law was generally satisfied in this experiment though some experimental errors were found. The leakage current was decreased and reached to the stable state with time. It was also shown that the time for the stabilization of leakage current was lessened as voltage increased

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.569-572
• /
• 2014

본 논문에서는 MEMS 용량형 센서를 위한 CMOS 스위치드-커패시터 인터페이스 회로를 설계하였다. 설계된 회로는 커패시턴스-전압 변환기(CVC), 2차 스위치드 커패시터 ${\Sigma}{\Delta}$ 변조기 및 비교기로 구성되어있다. 또한 일정한 바이어스를 공급해주는 바이어스 회로를 추가하였다. 전체적인 회로의 저주파 잡음과 오프셋을 감소시키기 위하여 Correlated-Double-Sampling(CDS) 기법과 Chopper-Stabilization(CHS) 기법을 적용하였다. 설계 결과 CVC는 20.53mV/fF의 민감도와 0.036%의 비선형성특성을 보였으며, ${\Sigma}{\Delta}$ 변조기는 입력전압 진폭이 100mV가 증가할 때, 출력의 듀티 싸이클은 약 5%씩 증가하였다. 전체회로의 선형성 에러는 0.23% 이하이며, 전류소모는 0.73mA이다. 제안된 회로는 0.35um CMOS 공정을 이용하여 설계되었으며, 입력전압은 3.3V이다. 설계된 칩의 크기는 패드를 포함하여 $1117um{\times}983um$ 이다.

• 한국과학교육학회지
• /
• 제17권1호
• /
• pp.75-83
• /
• 1997

The purpose of this study was to determine the strategies that middle school students used in solving problems concerning density and solubility. These were compared in the aspects of problem contexts for 42 students of varying logical reasoning ability, spatial ability, and learning approach. A coding scheme used consists of five categories: reading & organization, production, errors, evaluation, and strategy. Students' protocols were analyzed after intercoder agreement had been established to be .95. The results were as follows: 1. Students had more difficulties in reading and organizing the problems in everyday contexts than in scientific contexts. Students at the concrete-operational stage and / or surface approach were more likely to have difficulties in reading and organizing the problems than those at the formal-operational stage and / or deep approach. 2. Students tended to split up the solubility problems into sub-problems and to solve the density problem in everyday contexts in random manner. These were significantly correlated with the test scores concerning logical reasoning ability, spatial ability, and learning approach at the .1 level of significance. 3. Major errors in solving the density problems were to disregard the given information or generated and to use inappropriate information. Many errors in solving the solubility problems were found to be executive errors. The strategy to use the information given appropriately was positively related to students' logical reasoning ability, spatial ability, and learning approach. 4. More evaluation strategies were found in everyday contexts. Their strategies to grasp the meaning of answers and to check the math were significantly related to students' logical reasoning ability. 5. Students used the random trial-and-error strategy more than the systematic strategy and the systematic trial-and-error strategy, especially in everyday contexts. The strategies used by the students were significantly related to students' logical reasoning ability, spatial ability, and learning approach.

• The Journal of Advanced Prosthodontics
• /
• 제5권4호
• /
• pp.440-447
• /
• 2013

PURPOSE. Template-guided implant therapy has developed hand-in-hand with computed tomography (CT) to improve the accuracy of implant surgery and future prosthodontic treatment. In our present study, the accuracy and causative factors for computer-assisted implant surgery were assessed to further validate the stable clinical application of this technique. MATERIALS AND METHODS. A total of 102 implants in 48 patients were included in this study. Implant surgery was performed with a stereolithographic template. Pre- and post-operative CTs were used to compare the planned and placed implants. Accuracy and related factors were statistically analyzed with the Spearman correlation method and the linear mixed model. Differences were considered to be statistically significant at $P{\leq}.05$. RESULTS. The mean errors of computer-assisted implant surgery were 1.09 mm at the coronal center, 1.56 mm at the apical center, and the axis deviation was $3.80^{\circ}$. The coronal and apical errors of the implants were found to be strongly correlated. The errors developed at the coronal center were magnified at the apical center by the fixture length. The case of anterior edentulous area and longer fixtures affected the accuracy of the implant template. CONCLUSION. The control of errors at the coronal center and stabilization of the anterior part of the template are needed for safe implant surgery and future prosthodontic treatment.

• Radiation Oncology Journal
• /
• 제35권1호
• /
• pp.65-70
• /
• 2017

Purpose: To evaluate the utility of implanted surgical clips for detecting interfractional errors in the treatment of hepatobiliary and pancreatic cancer with postoperative radiotherapy (PORT). Methods and Materials: Twenty patients had been treated with PORT for locally advanced hepatobiliary or pancreatic cancer, from November 2014 to April 2016. Patients underwent computed tomography simulation and were treated in expiratory breathing phase. During treatment, orthogonal kilovoltage (kV) imaging was taken twice a week, and isocenter shifts were made to match bony anatomy. The difference in position of clips between kV images and digitally reconstructed radiographs was determined. Clips were consist of 3 proximal clips (clip_p, ${\leq}2cm$) and 3 distal clips (clip_d, >2 cm), which were classified according to distance from treatment center. The interfractional displacements of clips were measured in the superior-inferior (SI), anterior-posterior (AP), and right-left (RL) directions. Results: The translocation of clip was well correlated with diaphragm movement in 90.4% (190/210) of all images. The clip position errors greater than 5 mm were observed in 26.0% in SI, 1.8% in AP, and 5.4% in RL directions, respectively. Moreover, the clip position errors greater than 10 mm were observed in 1.9% in SI, 0.2% in AP, and 0.2% in RL directions, despite respiratory control. Conclusion: Quantitative analysis of surgical clip displacement reflect respiratory motion, setup errors and postoperative change of intraabdominal organ position. Furthermore, position of clips is distinguished easily in verification images. The identification of the surgical clip position may lead to a significant improvement in the accuracy of upper abdominal radiation therapy.

• 한국지반공학회지:지반
• /
• 제9권3호
• /
• pp.61-66
• /
• 1993

본 논문에서는 암반 분류를 위해 물리탐사 결과나 그동안 축적된 시공경험 등의 정성적 자료의 사용을 고려하였다. 터널 설계를 위한 요소(parameter)들이 공간적 상관관계를 갖기 때문에 지구 통계학(Geostatistics)을 이용하였으며, 특히, 비모수적 (non-parametric)방법 중의 하나인 지시 크리깅(indicator kriging) 기법을 사용했다. 최적 분류를 위한 선택 기준으로는 오차에 대응하는 비용(the cost of errors)을 사용했으며, 암반분류는 이분적 분류에 한정하였다. 앞으로, 정량적 데이타가 절대적으로 부족한 터널공사등에서 비교적 많은 양이 존재하는 정성적 데이타의 이용은 절실하며, 이러한 점에서 본 연구가 가지는 의미는 크다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 추계학술대회
• /
• pp.187-201
• /
• 2009

Semiconductor industry is based on equipment industry and timing industry. In particular, semiconductor process is very complex and as semiconductor-chip width tails and is becoming equipment gradually more as a high technology. Equipment operation is primarily engaged in semiconductor manufacturing (engineers and operator) of being conducted by, equipment errors have also been raised. Equipment operational data related to the error of korea occupational safety and health agency were based on data and production engineers involved in the operator's questionnaire was drawn through the error factor. Equipment operating in the error factor of 9 big item and 36 detail item detailed argument based on the errors down, and 9 big item the equipment during operation of the correlation error factor was conducted. Each of the significance level was correlated with the tabulation and analysis. Using the maximum correlation coefficient, the correlation between the error factors to derive the relationship between factors were analyzed. Facility operating with the analysis of error factors (big and detail item) derive a relationship between the model saw. The end of the operation of the facility in operation on the part of the two factors appeared as prevention. Safety aspects and ergonomics aspects of the approach should be guided to the conclusion.

• Journal of Positioning, Navigation, and Timing
• /
• 제13권3호
• /
• pp.245-256
• /
• 2024

Following the introduction of civilian navigation, the commercial Global Navigation Satellite System (GNSS) receivers' market has been expanding in various fields such as autonomous driving and smart cities. With improved receiver performance and widespread use of GNSS, the configurations of base and rover receivers are becoming more complex. As a result, user must consider combinations of base stations with different qualities, costs, and performances. To address these issues, we conducted zero-baseline tests to analyze the double-differenced code-pseudorange noise of various receiver combinations, ranging from low- to high-cost. The results showed that the noise varied depending on the receiver combination. Notably, receivers from the same manufacturer exhibited similar noise and positioning errors despite significant price differences. We also found that the double-differenced noise of all receiver combinations was correlated with the Carrier-to-Noise Density Ratio (C/N0), the satellite elevation angle, and the Doppler shift, and it did not perfectly follow a normal distribution. Further analysis based on Modified Allan Deviation (MDEV) showed that different types of noise were observed for each receiver combination and the double-differenced noise and positioning errors have similar statistical characteristics. From this study, the importance of receiver combinations and their various characteristics can be better understood.

• 한국치위생학회지
• /
• 제19권2호
• /
• pp.241-249
• /
• 2019

Objectives: This study aimed to investigate the effects of verbal violence experience on stress and positive psychological capital as well as the mediating effects of positive psychological capital. Methods: A survey was conducted with dental hygienists working at university hospitals, general hospitals, and dental hospitals and clinics in Busan, Gyeongnam, and Ulsan areas.Of the 230 questionnaires distributed, 206 were used in the analysis after excluding 24 completed questionnaires that had errors or missing answers. Results: As a result of identifying the relationships between verbal violence damage, positive psychological capital, and stress, verbal violence damage was negatively correlated with positive psychological capital (r=-0.28, p<0.001) and positively correlated with stress (r=0.40, p<0.001). Positive psychological capital had a negative correlation with stress (r=-0.25, p<0.001). As a result of verifying the mediating effects of positive psychological capital on the relationship between verbal violence damage and stress among dental hygienists, it was found that verbal violence had a significant effect on stress and positive psychological capital in the first and second stages. In the third stage, the effect of positive psychological capital on stress was significant, showing that there was a mediating effect. Conclusions: Therefore, sound work environments should aim to reduce verbal violence while increasing support systems to reduce negative emotional and psychological states.

• 대한조현병학회지
• /
• 제23권1호
• /
• pp.15-28
• /
• 2020

Objectives: This study investigated the relationship between clock-drawing test (CDT) performance and neuropsychological functions in patients with chronic schizophrenia. Methods: Thirty-one patients with schizophrenia and 30 healthy controls participated in this study. The CDT was administered in three conditions and analyzed using both quantitative and qualitative scoring systems. Comprehensive neuropsychological tests were administered. Results: The results of the quantitative analysis showed that the schizophrenia group performed significantly worse in all three conditions of the CDT compared with the control group. However, no significant differences were observed between the two groups, when the IQ and educational level were controlled. The qualitative analysis showed that the schizophrenia group exhibited significantly more errors in "graphic difficulty" compared with the control group. In addition, CDT quantitative scores were significantly correlated with visuospatial function, memory, attention and executive functions in patients with schizophrenia. Conversely, each qualitative error type was correlated with specific cognitive domains. Furthermore, "graphic difficulty" and "spatial/planning deficit" were identified as predictors of depression symptoms in patients with schizophrenia. Conclusion: The present study demonstrated that the CDT is useful for assessing cognitive dysfunctions in patients with schizophrenia, while qualitative analyses provide more specific information about cognitive deficits compared with quantitative analyses.