• Structural Engineering and Mechanics
• /
• 제53권5호
• /
• pp.957-979
• /
• 2015

The present paper investigates the influence of the orientation of the ground-motion reference axes, the seismic incident angle and the seismic intensity level on the inelastic response of asymmetric reinforced concrete buildings. A single storey asymmetric building is analyzed by nonlinear dynamic analyses under twenty bi-directional ground motions. The analyses are performed for many angles of incidence and four seismic intensity levels. Moreover three different pairs of the horizontal accelerograms corresponding to the input seismic motion are considered: a) the recorded accelerograms, b) the corresponding uncorrelated accelerograms, and c) the completely correlated accelerograms. The nonlinear response is evaluated by the overall structural damage index. The results of this study demonstrate that the inelastic seismic response depends on the orientation of the ground-motion reference axes, since the three individual pairs of accelerograms corresponding to the same ground motion (recorded, uncorrelated and completely correlated) can cause different structural damage level for the same incident angle. Furthermore, the use of the recorded accelerograms as seismic input does not always lead to the critical case of study. It is also shown that there is not a particular seismic incident angle or range of angles that leads to the maximum values of damage index regardless of the seismic intensity level or the ground-motion reference axes.

• 임상간호연구
• /
• 제24권3호
• /
• pp.303-312
• /
• 2018

Purpose: The purpose of this study was to identify the relationship between response to violence, resilience and burnout and to investigate the factors that affect burnout in emergency room nurses. Methods: Data from 237 nurses in 15 emergency rooms were collected using a structured questionnaire. Data were analyzed using SPSS 23.0, and the analyses included descriptive statistics, t-test, Mann-Whitney test, ANOVA, Kruskall Wallis test, Pearson correlation, and hierarchical multiple regression. Results: Burnout was positively correlated with response to violence and negatively correlated with resilience in emergency room nurses. Response to violence (${\beta}=.466$, p<.001), resilience (${\beta}=-.308$, p<.001), and religion (${\beta}=-.131$, p=.011) were significant predictors of burnout, and they explained 39.9% of emergency room nurses' burnout. Conclusion: Response to violence and resilience were identified as significant factors affecting burnout in emergency room nurses. Therefore, it is necessary to develop strategies to cope effectively with violence and to develop programs that can strengthen resilience.

• 한국식품영양학회지
• /
• 제26권4호
• /
• pp.975-984
• /
• 2013

This study is performed to estimate the prevalence of metabolic syndrome among male workers and to identify the relationships with many related factors including anthropometry, hematological index, serum lipid level, dietary-related behaviors and health-related behaviors. According to the age groups, the 20s are significantly higher in normal and risk groups than in the metabolic syndrome (MS) group, the 30s are significantly higher in MS group than the other groups. The levels of AST and ${\gamma}$-GTP both show significant differences in the order of MS group ($30.3{\pm}8.8U/l$, $91.1{\pm}40.2U/l$) > risk group ($25.7{\pm}8.1U/l$, $41.8{\pm}20.2U/l$) > normal group ($22.8{\pm}6.0U/l$, $26.6{\pm}10.7U/l$). For the frequency of breakfast consumption, the response of 'Every day' is significantly higher in MS group than normal and risk groups, but the response of 'Not at all' is significantly higher in normal group than MS and risk groups. The drinking amount is positively correlated with ${\gamma}$-GTP in normal group, and it is negatively correlated with the hematocrit level, but it is positively correlated with the systolic blood pressure in MS group. AST is positively correlated with glucose concentrations of the MS group. The ALT is positively correlated with waist circumferences and systolic blood pressure in the risk group. The results of this study show that breakfast frequency, education level, drinking amount, drinking frequency, exercise frequency, AST, ALT and ${\gamma}$-GTP levels are all important risk factors of MS. Therefore, it is very important to maintain a healthy life style for the prevention of MS incidence.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권10호
• /
• pp.1387-1393
• /
• 2014

This study aimed to estimate genetic correlation between carcass grading and retail productivity traits and to estimate the correlated response on retail productivity traits through selection for carcass grading traits in order to assess the efficacy of indirect selection. Genetic parameters were estimated with the data from 4240 Hanwoo steers using mixed models, and phenotypes included carcass weight (CWT), back fat thickness (BFT), eye muscle area (EMA), marbling (MAR), and estimated lean yield percentage (ELP) as the carcass grading traits, and weight and portion of retail cuts (RCW and RCP), trimmed fats (TFW and TFP) and trimmed bones (TBW and TBP) as the lean productivity traits. The CWT had positive genetic correlations with RCW (0.95) and TFW (0.73), but its genetic correlation with RCP was negligible (0.02). The BFT was negatively correlated with RCP (-0.63), but positively correlated with TFW and TFP (0.77 and 0.70). Genetic correlations of MAR with TFW and TFP were low. Among the carcass grading traits, only EMA was positively correlated with both RCW (0.60) and RCP (0.72). The EMA had a relatively strong negative genetic correlation with TFW (-0.64). The genetic correlation coefficients of ELP with RCP, TFW, and TFP were 0.76, -0.90, and -0.82, respectively. These correlation coefficients suggested that the ELP and EMA might be favorable traits in regulating lean productivity of carcass.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권1호
• /
• pp.29-35
• /
• 1995

A selection experiment with Romney Marsh sheep was used to evaluate correlated responses to selection. The selected flock was formed in 1979 by the Romney Group Breeders where selection was for prolificacy, defined as the number of live lambs born per ewe joined per year and a randomly selected control flock was established in 1982. Selection for prolificacy resulted in (i) increased ewe fertility, (ii) increased ewe ovulation rate, (iii) increased ewe litter size, (iv) decreased ewe body weight, (v) decreased lamb birth weight and (vi) decreased lamb 8-week weight. The rates of correlated responses per year respectively for ewe fertility, ewe ovulation rate, ewe litter size, ewe body weight, lamb birth weight and lamb 8-week weight were 0.033(0.002), 0.043(0.016), 0.019(0.005), -0.017(0.066), -0.055(0.025) and -0.150(0.057).

• BMB Reports
• /
• 제28권5호
• /
• pp.464-470
• /
• 1995

Quinolone antibiotics are DNA gyrase inhibitors, but their bactericidal action seems to involve more than the inhibition of DNA gyrase activity. Hence, the potentially crucial factors among possible mechanisms of quinolone action; cleavable complex formation, inhibition of DNA synthesis, and induction of SOS response were investigated. These parameters were measured in an Escherichia coli strain exposed to quinolones in the logarithmic growth phase, and correlated with the bactericidal activity of quinolones. Cleavable complex formation proved to be the factor most related to bactericidal action. Inhibition of DNA synthesis was substantially correlated with bactericidal activity, but induction of SOS response was least correlated with bactericidal activity. Therefore, it was concluded that quinolones exert bactericidal action primarily through cleavable complex formation, and subsequent unknown cellular processes together with inhibition of DNA synthesis contribute to the bactericidal activity of quinolones.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.429-435
• /
• 1997

The third order nonlinear optical susceptibilities, {{{{ chi }}(3), of the CuCl doped alumino-borosilicate glasses were measured by the two beam configuration DFWM method and the absorption saturation method, and the measured {{{{ chi }}(3) values were about 10-8 esu in both methods. The response time was estimated to be about 105ps from the time decay curve of the luminescence spectra obtained by time-correlated single-photon counting (TCSPC) method.

• 한국광학회지
• /
• 제5권1호
• /
• pp.90-99
• /
• 1994

모드록킹된 피코초 레이저, 고속전자장치, 전자관형 광증배관 등을 사용하여, 피코초 분해능을 갖는 시간상관 단광자 계수 장치 및 시분해 스펙트럼 측정 장치를 제작하였다. 기기감음함수는 레이저의 펄스모양, 고속전자장치의 timing jitter 및 walk, 광증배관과 증폭기의 특성에 민감함을 보여주었다. 광학계의 분산등을 보정하여 25 ps의 반치폭을 갖는 기기감응함수를 얻었으며, 이와 같은 결과는 이 장치를 사용할 경우 deconvolution을 통하여 10 ps 이하의 분해능으로 피코초에서 마이크로초의 넓은 범위에 걸쳐서 여기상태 소멸시간의 측정이 가능함을 보여준다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권7호
• /
• pp.883-887
• /
• 2000

One way of evaluating the effectiveness of a dairy breeding program is to measure response to selection. This may be direct or indirect. The objectives of this study were to estimate expected progress for direct selection on milk, fat and protein yields; to estimate the expected correlated responses on indirect selection for milk, fat and protein yields in Zimbabwean Holstein cattle and to establish the effect of selection intensity on responses. The Animal Model contained fixed effects of herd, year of calving, calving month, dry period, milking frequency and additive effects pertaining to cows, sires and dams. AIREML software package was used to analyse the data. The genetic and phenotypic parameters obtained in this study were used to compute direct and correlated responses to selection. Because of the higher heritabilities in first parity, genetic progress was found to be greater when selection was practised on first parity cows as compared to later lactations. It is therefore recommended that older cows in the herd be replaced with improved heifers so as to enhance genetic progress.

• Nuclear Engineering and Technology
• /
• 제29권6호
• /
• pp.476-487
• /
• 1997

To resolve several arguments raised for the current analysis of a structure like top hat, which is composed of flange, cylinder and plate, the dynamic response analysis is performed for the full and half models. The dynamic characteristics are investigated for full and half models and the results are compared between them. The responses such as bolt reactions and stresses due to random loading are also obtained using the analysis capabilities between commercial programs which have the routine for the random vibration analysis. Several general purpose structural analysis programs are used to get the response due to the random loadings. Also the application of the random loading and the effect of correlations such as fully correlated, partially correlated and fully uncorrelated cases are studied and the general directions for the generation of design loads due to random loading are suggested.