• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5051-5059
• /
• 2015

농업용 트랙터 프론트 로더의 낙하정지시험, 코너당김시험, 코너충돌시험의 세 가지 충격시험 조건에 대하여 강체동해석, 과도구조해석, 정적구조해석 등을 수행하여 각 부품의 응력분포를 구하고 안전성을 평가하였다. 낙하정지시험은 프론트 로더를 최대높이에서 시작하여 세 단계로 나누어 낙하시킨 후 정지시켜서 충격을 가하는 경우를 해석하였다. 코너당김시험은 체인으로 버켓 밑면의 모서리를 지면에 구속한 상태에서 프론트 로더를 갑자기 상승시키는 경우를 해석하였다. 코너충돌시험은 주행 중에 버켓의 모서리가 충격장애물과 충돌하는 경우를 해석하였다. 세 가지 충격시험 조건에 대한 해석 결과, 모두 마운트의 사각관 모서리와 마운트의 양쪽 꺾임 위치에서 국부적 응력집중이 발생하였다. 이러한 결과를 바탕으로 새로운 프론트 로더의 설계 및 수정 시 파단에 관한 안전성을 개선하는데 도움이 될 것으로 기대된다.

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.109-119
• /
• 2018

The purpose of this study is to evaluate the structural safety of the front-end loader for the 90 kW class of agricultural tractors in impact test conditions. Deformation and stress on the loader under the impact test conditions are analyzed using the commercial finite element analysis software ANSYS. In previous research dealing with the initial design of the loader, the maximum stress occurred in the mount and exceeded the yield strength of the material. In this paper, an improved design of the mount of the loader was proposed to reduce the stress concentration in the initial design. The safety of the improved design was verified by performing rigid-body dynamics analysis, transient structural analysis, and static structural analysis under three impact test conditions: a drop and catch test, a corner pull test, a corner push test. It was found that the local stress concentration in the mount that appeared in the initial design was greatly reduced in the improved design, and that the maximum stresses occurred in the three impact test conditions are smaller than the yield strength. It is expected that the design improvement of the mount proposed in this study and the method of analysis may be effectively used to enhance structural safety in the development of new model front loaders in the future.

• 산업기술연구
• /
• 제22권A호
• /
• pp.185-192
• /
• 2002

The performance of old and the new concrete construction depends upon bond strength between old and the new concrete. Current adhesive and strength measurement method ignores the effect of stress concentration from shape of specimens. Therefore, this research calculates stress concentration coefficient as the ratio of drilling depth to drilling diameter($h_s/D$), the ratio of overlay thickness to drilling diameter($h_0/D$), the ratio of steel disk thickness to drilling diameter(t/D), the ratio of overlay elastic modulus to substrate modulus($E_1/E_0$), the distance from core to corner border(L_$_{corner}$) and the distance between cores(L_$_{coic}$) vary. The finite element method is adapted to analysis The results from 'the F.E.M analysis are as follows. The stress concentration effects can be minimized when the ratio of drilling depth to drilling diameter($h_s/D$) is 0.20~0.25, the elastic modulus ratio($E_1/E_0$) is 06~1.0, and the ratio of steel disk thickness to drilling diameter(t/D) is 3.0. The overlay thickness, the distance from specimens to corner border(L_$_{corner}$), the distance between cores(L_$_{coic}$) almost do not affect to the stress concentration.