• Convergence Security Journal
• /
• v.14 no.5
• /
• pp.3-8
• /
• 2014

We have tried to compare two different IDSs which are widespread over the network administrator, Snort and Suricata, in functional and performance aspects. Specifically, we focused on analyzing upon what functions for detecting threat were added newly and what Multi-Threading introduced newly for Suricata has influenced in a performance aspect. As a result, we could discover that there are some features in Suricata which has never existed in Snort such as Protocol Identification, HTTP Normalizer & Parser, and File Identification. Also, It was proved that the gap of PPS(Packets Per Second) becomes wider, as the number of CPU Cores which are working increase. Therefore, we could conclude that Suricata can be an efficient alternative for Snort considering the result that Suricata is more effective quantitatively as well as qualitatively.

• Journal of The Korean Astronomical Society
• /
• v.31 no.2
• /
• pp.117-125
• /
• 1998

We have observed the 10-9 transitions of $HC_3N$ and its $^{13}C$ substitutes ($H^{13}CCCN,\;HC^{13}CCN$, and $HCC^{13}CN$), and the vibration ally excited 12-11 ($v_r=1$) $HC_3N$ transition toward the Sgr B2 molecular cloud. The observed $HC_3N$ emission shows an elongated shape around the Principal Cloud ($\~$4.5 pc in R.A. $\times$ 7.4 pc in Decl.). The optically thin $H^{13}CCCN$ line peaks around the (N) core and we derive the total column density $N(H^{13}CCCN) = 4 {\times}10^{13} cm^{-2}$ at this position. Toward the 2' N cloud which shows the peculiar chemistry, the $HC_3N$ lines show enhancements compared to the extended envelope. The shocks of the 2' N may have resulted in the enhancement of $HC_3N$. The hot component of $HC_3N$ is strongly concentrated around the (N) core and its HPW is $\~$0.9 pc in diameter. We derive the lower limit of the abundance ratio $N(HC_3N)/N(H^{13}CCCN)$ to be larger than 40 in most regions except the (M) and (N) cores. The fractionation processes of $^{13}C $at this region may not be as effective as previously reported.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.105.1-105.1
• /
• 2011

We present the modeling results of deuterium fractionation of water ice, $H_2$, and the primary deuterium isotopologues of $H3^+$ in the physical conditions associated with the star and planet formation process. We calculated the deuterium chemistry for a range of gas temperatures (Tgas~10-30 K) and ortho/para ratio (opr ) of $H_2$ based on state-to-state reaction rates and explore the resulting fractionation including the formation of a water ice mantle coating grain surfaces. We find that the deuterium fractionation exhibits the expected temperature dependence of large enrichments at low gas temperature, but only for opr-H2<0.01. More significantly the inclusion of water ice formation leads to large D/H ratios in water ice (${\geq}10^{-2}$ at 10 K) but also alters the overall deuterium chemistry. For T<20 K the implantation of deuterium into ices lowers the overall abundance of HD which reduces the efficiency of deuterium fractionation at high density. Under these conditions HD will not be the primary deuterium reservoir in the cold dense interstellar medium and $H3^+$ will be the main charge carrier in the dense centers of pre-stellar cores and the protoplanetary disk midplane.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.628-631
• /
• 1988

This paper describes a fingerprint classification on the basis of feature points(whorl, core) and feature vector and uses a syntactic approach to identify the shape of flow line around the core. Fingerprint image is divided into 8 by 8 subregions and fingerprint region is separated from background. For each subregion of fingerprint region, the dominant ridge direction is obtained to use the slit window quantized in 8 direction and relaxation is performed to correct ridge direction code. Feature points(whorl, core, delta) are found from the ridge direction code. First classification procedure divides the types of fingerprint into 4 class based on whorl and cores. The shape of flow line around the core is obtained by tracing for the fingerprint which has one core or two core and is represented as string. If the string is acceptable by LR(1) parser, feature vector is obtained from feature points(whorl, core, delta) and the shape of flow line around the core. Feature vector is used hierarchically and linearly to classify fingerprint again. The experiment resulted in 97.3 percentages of sucessful classification for 71 fingerprint impressions.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1886-1891
• /
• 1998

Traction battery chargers are an integral part of the required charging infrastructure. EV charging systems are continuing to improve in design. The newer types are affecting power quality to a much lesser extent. High efficiency battery chargers are being designed and produced which form little or no harmonic distortion. In addition chargers are becoming smaller and lighter. This is due mainly to the fact that there are improvements in the power electronics industry, especially with respected to IGBTs. Lower costs are achieved by the reduction in price of the IGBTs, standard magnetic material and small cores for inductors and transformers. But electric vehicles occupy a relatively small market niche at present. Therefore with already existing power supply networks, establishment of EV infrastructure can safeguard the service value of present vehicle as well as ensure the ability to charge a significant number of such vehicle. In this paper, we surveyed the update charging technologies according to the conductive charging, inductive charging and fast charging. Then we suggested cost-optimized charging infrastructure in consideration of the economical, political and technical standpoint.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04a
• /
• pp.68-71
• /
• 2002

The electromagnetic properties and thermal behavior of ferrite cores used in the blocking filter for PLC were investigated as a function of additives. The highest density of 4.98 $g/cm^2$ and permeability of 8221 were obtained to the specimen added $MoO_3$ 400 ppm, $SiO_2$ 100 ppm and CaO 200 ppm since the microstructures were compacted through reduction of pores in the specimen. The permeability was increased up to 13094 at $110^{\circ}C$ with increasing temperature of specimen, however, it was decreased precipitously to under 100 over $110^{\circ}C$. The exothermic behavior was observed that the temperature of specimens became $102^{\circ}C$ at 1MHz. In the consequence, the ferrite core developed by this research will maintain the stable electromagnetic properties since the temperature of ferrite core rose to $93^{\circ}C$ in the range of 10kHz to 450kHz bandwidth qualified for PLC.

• Elastomers and Composites
• /
• v.33 no.2
• /
• pp.93-102
• /
• 1998

In electric cable industries, the curing extent of the rubber materials covering the electric cores gives an significant effect on their final performance. The curing extent of rubber is controlled mostly by pull-out velocity of cable in the extrusion process. The final curing extent may be different for different radial positions inside the rubber because of the non-uniform temperature distributions during the curing process. In this contribution, the prediction of curing extent distribution throughout the radial direction of rubber is represented when the cable is passing through the steam curing zone with a fixed pull-out velocity. The prediction of the optimum pull-out velocity for the desired curing extent distribution is also reported. The steady-state heat balance was developed for the curing and cooling processes in which the pull-out rubber was cured by high temperature steam and then cooled by ambient water. A few essential material properties such as density, specific heat, and thermal conductivity were measured to analyze the temperature distribution during the curing and cooling processes. The times to reach 90% curing extent at varying temperatures were measured and used to determine the final cure extent distribution inside the rubber.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.75-78
• /
• 2007

In this study, low velocity impact analysis on Turbo Fan Engine composite sandwich structure was performed. Sandwich structure configuration is made of carbon/epoxy face sheets and foam cores. For validating study, the results of an experimental and of a Finite Element Method analysis were compared previously. From the Finite Element Method analysis results of sandwich panel, it was confirmed that the result of analysis was reasonable. Impactor velocity to initiate damage was estimated, and in order to investigate the damage at the predicted velocity, impact analysis using Finite Element Method was performed. According to the impact analysis results of sandwich panel, it was confirmed that the damage was generated at the estimated impact velocity.

• Steel and Composite Structures
• /
• v.19 no.3
• /
• pp.661-678
• /
• 2015

Buckling Restrained Braces (BRB) have been widely used in the construction industry as they utilize the most desirable properties of both constituent materials, i.e., steel and concrete. They present excellent structural qualities such as high load bearing capacity, ductility, energy-absorption capability and good structural fire behaviour. The effects of size and type of filler material in the existed gap at the steel core-concrete interface as well as the element's cross sectional shape, on BRB's fire resistance capacity was investigated in this paper. A nonlinear sequentially-coupled thermal-stress three-dimensional model was presented and validated by experimental results. Variation of the samples was described by three groups containing, the steel cores with the same cross section areas and equal yield strength but different materials (metal and concrete) and sizes for the gap. Responses in terms of temperature distribution, critical temperature, heating elapsed time and contraction level of BRB element were examined. The study showed that the superior fire performance of BRB was obtained by altering the filler material in the gap from metal to concrete as well as by increasing the size of the gap. Also, cylindrical BRB performed better under fire conditions compared to the rectangular cross section.

• Hwankyungkyoyuk
• /
• v.19 no.3
• /
• pp.102-113
• /
• 2006

The purpose of this study is to devise proper plans for sustainable energy management in schools through applying school eco-audit to energy field. This study is performed by literature review and the analysis of case study. This study analyzes the energy-saving model school according to the three cores of eco-audit such as school administration system, teaching-learning method, and ecological policy, and the result of the study is as followings. First, according to the analysis of school administration system for energy education programs, the participation of all the school staff is very low, and the democratic decision-making system is unsatisfactory. Second, according to the analysis of teaching-learning method, the program is mainly managed by teacher-oriented method not by learner-oriented one. The effect on the education of energy-saving program is a little improved in cognitive area, but is insufficient in affective area. Third, in the aspect of the ecological policy, the practical energy-saving effect in schools is unsatisfactory, and shows the difficulty of continuing application of the program. Consequently, it is desirable to integrate the energy-saving program with the eco-audit for sustainable energy management in schools. Implementation of the energy eco-audit in schools for the sustainable development education as teaching-learning method could achieve extended effect for the earth environmental conservation.