• Bulletin of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.869-872
• /
• 2009

Double-doped magnetic particles that incorporated magnetites into both the surface and inside the silica cores were fabricated via the sol-gel reaction of citrate-stabilized magnetites with silicon alkoxide. Double-doped magnetic particles were easily fabricated and exhibited an higher magnetism in comparison to the singledoped magnetic particles that were prepared by the erosion of surface-deposited magneties from double-doped magentic particles. Thin gold layer was formed over magnetic silica nanospheres via nanoseed-mediated growth of gold clusters. The plasmon-derived absorption bands of double-doped magnetic silica-gold nanoshells were more broadened and shifted down by ca. 20 nm as compared to those of single-doped magnetic silicagold nanoshells, which were attributed to not only the surface scattering of incident light due to relatively rough surafce morphology, but also heterogeneous permittivity of dielectric cores due to surface-deposited magnetites.

• Journal of The Korean Astronomical Society
• /
• v.45 no.6
• /
• pp.157-166
• /
• 2012

Using the Submillimeter Array (SMA), we identified two bright hot subcores, MM1a and MM1b (size ~ 1" and mass ~ 0.5 $M_{\odot}$) separated by about 1.600, in the 230 GHz continuum emission toward the massive star-forming region DR21(OH). Both display typical hot core characteristics but have slightly different chemical properties. For example, highly saturated species show stronger emission toward MM1a and seem to be evaporating directly from the grain mantles. In contrast, simple sulfur-bearing species have brighter emission at MM1b. These features indicate that MM1a is at an earlier stage than MM1b, and the small-scale chemical differences between these two cores may result from the age difference of the order of $10^4$ years.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.4
• /
• pp.278-285
• /
• 1990

It is well know that optical oupler that is composed of the polished single-mode optical fiber can separate two arbitrary wave lengths. Wavelength division ranges of the WDM optical coupler that is made of the bending fiber with radius R vary with the center wavelength of the signal and spacing between two cores. In this paper, when optical fiber is fixed with the radius R, We proposed the spacing between two cores that can provide minimum division range. Also, We proposed the minimum radius R necessary to separate two arbitary wavelengths of the signal.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.1
• /
• pp.113-120
• /
• 1999

Due to the heterogeneous nature of a concrete, periodic inspections are compulsory to maintenance of quality of concrete structures. The major object of this study is to analyze and investigate experimentally the experimental equation for the estimate of compressive strength of prestressed concrete. In this study, surface hardness method, ultrasonic method are investigated to evaluate strength of concrete specimens. Specimens are cast in laboratory and cores are cut from specimens in order to estimate the accurate strength. These values are used to compare with calculated values from test data. The result shows that the proposed equation can reproduce the results at prestressed concrete beam girders more appropriately than previous equations.

• Economic and Environmental Geology
• /
• v.27 no.6
• /
• pp.563-569
• /
• 1994

Resistivity Image Profiling has been applied to a geological survey in the Keoje-do area. Survey lines are located near the KD-02 and KD-06 wells in the area, where we have already sampled all rock cores and carried out several kinds of geophysical logs. In each site a resistivity cross-section is obtained by inverting pole-pole apparent resistivities. Comparing the reconstructed resistivity section with the rock cores and logging data obtained in the well provides a detailed picture of subsurface geology. The geology of KD-02 site is composed of conglomerate, sandstone and shale with fractures. The reconstructed resistivity image is useful for assessing the grade of weathering of these rocks. The KD-06 site is mainly underlain by granitic rocks, and its fresh basement can be delineated by resistivities over $1000{\Omega}{\cdot}m$.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.7
• /
• pp.62-68
• /
• 2014

We proposed a series connection-type superconducting fault current limiter(SFCL) using E-I core that can prevent the internal magnetic flux generation of cores during normal operation, and prevent the saturation of cores due to a sudden magnetic flux generation at the initial stage of fault occurrence while limiting the peak current. Through a short-circuit simulation experiment, we analyzed the operating status of the two superconducting elements and limiting characteristics according to the size of the fault current peak before and after the failure. Further, the double peak current limiting characteristics according to the winding directions as well as the current and the voltage of each coil were compared and analyzed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.427-427
• /
• 2007

The global applications of aspherics surfaces will expand rapidly on the electronics, optical components, communications, aerospace, defense, and medical optics devices etc. Especially, Asymmetric aspheric prism lens is one of the important parts in HMD(Head Mounted Display) because it affects dominantly on the optical performance of HMD. The mold core is the most important device to produce the plastic lenses by injection molding method. In this study, the mold cores for asymmetric aspheric prism lens were processed using fly-cutting method which is kind of the ultra precision processing and form accuracy and surface roughness of the cores were measured.

• Nuclear Engineering and Technology
• /
• v.35 no.4
• /
• pp.336-346
• /
• 2003

This study is intended to evaluate the dependency of TRU recycling characteristics on the neutron spectrum shift in a Pb-Bi cooled core. Considering two Pb-Bi cooled cores with the soft and the hard spectrum, respectively, various characteristics of the recycled core are carefully examined and compared with each other. Assuming very simplified fuel cycle management with the homogeneous and single region fuel loading, the burnup calculations are performed until the recycled core reached to the (quasi-) equilibrium state. The mechanism of TRU recycling toward the equilibrium is analyzed in terms of burnup reactivity and the isotopic compositions of TRU fuel. In the comparative analyses, the difference in the recycling behavior between the two cores is clarified. In addition, the basic safety characteristics of the recycled core are also discussed in terms of the Doppler coefficient, the coolant loss reactivity coefficient, and the effective delayed neutron fraction.

• Computers and Concrete
• /
• v.11 no.5
• /
• pp.463-473
• /
• 2013

As known, concrete classes are described as strength of standard specimens produced and kept in ideal conditions, not including reinforcement and not subjected to any load effect before. Under the circumstances, transforming core strengths to the standard specimen strength is necessary and considering all parameters, affected on the core strength, is inevitable. In fact, effects of the reinforcement and the load history on concrete strength are generally neglected when these mentioned transforms are performing. The main purpose of this paper is investigating the effects of the reinforcement and the load history on the core strength. This investigation is experimentally performed on cores drilled from specimens having different keeping conditions, reinforced, unreinforced, subjected to bending and central pressure in various proportions of failure load during specified periods. Obtained results show that the importance of these effects cannot be neglected.

• Journal of information and communication convergence engineering
• /
• v.18 no.4
• /
• pp.222-229
• /
• 2020

Recent multi-core processors for smart devices use per-core dynamic voltage and frequency scaling (DVFS) that enables independent voltage and frequency control of cores. However, because the conventional task scheduler was originally designed for per-core DVFS disabled processors, it cannot effectively utilize the per-core DVFS and simply allocates tasks evenly across all cores to core utilization with the same CPU frequency. Hence, we propose a novel task scheduler to effectively utilize percore DVFS, which enables each core to have the appropriate frequency, thereby improving performance and decreasing energy consumption. The proposed scheduler classifies applications into two types, based on performance-sensitivity and allows a performance-sensitive application to have a dedicated core, which maximizes core utilization. The experimental evaluations with a real off-the-shelf smart device showed that the proposed task scheduler reduced 13.6% of CPU energy (up to 28.3%) and 3.4% of execution time (up to 24.5%) on average, as compared to the conventional task scheduler.