• International journal of advanced smart convergence
• /
• v.7 no.3
• /
• pp.92-100
• /
• 2018

In this paper, we propose a fault-tolerant scheduling scheme with energy efficiency for real-time periodic tasks on DVFS-enabled multicore processors. The scheme provides the tolerance of a permanent fault with the primary-backup task model. Also the scheme reduces the energy consumption of real-time tasks with the fully overlapped execution between each primary task and its backup task, whereas most of previous methods tried to minimize the overlapped execution between the two tasks. In order to the leakage energy loss of idle cores, the scheme activates a part of available cores with rarely used cores powered off. Evaluation results show that the proposed scheme saves up to 82% energy consumption of the previous method.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1690-1692
• /
• 2000

The principle of crimping connection is to produce a compressive connection force between terminal and cores(wire conductor). Compressive connection force is produced by pushing each other on that stress(crimping force) of barrel by restored elastic strain after plastic deformation and the expansion force of cores' elastic stress. And resistance and tension force between terminal and cores are determined according to the condition of compressive connection force. In this study, we've found out that the adaptive height which has maximum tensile force by measuring a tensile force with a height of terminal.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.202-203
• /
• 2002

Ribbon type nanocrystalline alloy cores have shown excellent soft magnetic properties in the high frequency range because of small crystalline anisotropy and nearly zero magnetostriction[1]. In present, however ribbon alloys gives some limit in applications such as a large inductor and reactors of PFC circuit, which are required good DC bias property and low loss in the high frequency. Powder alloys with ultra fine grain structure can be an important way to overcome this kind of disadvantage, and to improve the high frequency soft magnetic properties in conventional metallic powder cores[2]. (omitted)

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.1
• /
• pp.52-60
• /
• 2003

For a System-on-a-Chip(SoC) comprised of multiple IP cores, various design techniques have been proposed to provide diverse test link configurations. In this paper, we introduce a new flag based Wrapped Core Linking Module (WCLM) that enables systematic integration of IEEE 1149.1 TAP'd cores and P1500 wrapped cores with requiring least amount of area overhead compared with other state-of-art techniques. The design preserves compatibility with standards and scalability for hierarchical access.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.252-256
• /
• 2013

In order to overcome the complexity and performance limit problems of superscalar processors, the multi-core architecture has been prevalent recently. Usually, the number of cores mostly used for the multi-core processor architecture ranges from 2 to 16. However in the near future, more than 32-cores are likely to be utilized, which is called as many-core processor architecture. Using SPEC 2000 benchmarks as input, the trace-driven simulation has been performed for the 32 to 1024 many-core architectures extensively. For 1024-cores, the average performance scores 15.7 IPC, but the performance increase rate is saturated.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.917-920
• /
• 2005

This paper introduces an optimal design technique for a 250-watt isolation transformer using a recently developed optimization method, dynamic encoding algorithm for searches(DRAS). Although the optimal design technique for transformers dates back to 1970s and local optimization is often undertaken using FEM nowadays, literature concerning global optimization of transformer cores is rarely found against its importance. In this paper, a small isolation transformer is used as a model to be optimized with application of DEAS to corresponding mathematical description. The optimization result confirms that DEAS can be successfully employed to design transformer cores for various design specifications only by changing cost functions.

• Advances in Energy Research
• /
• v.3 no.2
• /
• pp.125-131
• /
• 2015

Prompt neutron lifetime calculations have been performed for the NIRR-1 reactor HEU and LEU cores using the 1/v insertion and the Adjoint flux weighing methods. Results of calculations obtained for the HEU and LEU cores are respectively $57.3{\pm}0.8$ and $47.5{\pm}0.7$ for the 1/v insertion and $56.9{\pm}0.3$ and $46.3{\pm}0.5$ for the Adjoint flux. There is a good agreement seen between the two methods for both cores. The prompt neutron lifetime was observed to be shorter in the LEU than for the HEU as expected. However, the Adjoint flux weighing method seemed to be the easiest method in calculating the prompt neutron lifetime for NIRR-1.

• Structural Engineering and Mechanics
• /
• v.77 no.3
• /
• pp.407-416
• /
• 2021

Seismic isolation is one of the best-advanced methods for controlling seismic vibrations in buildings, bridges and nuclear facilities. A new Friction Multi-Layer Elastomeric Seismic Isolator (FMESI) has been modeled, analyzed and investigated by ABAQUS finite element analysis software and then, compared to real models. A number of friction cores have been used instead of the lead core therefore, some of the previous isolator problems have been almost resolved. Moreover, Studies show that the proposed isolator provides suitable initial stiffness and acceptable hysteresis behavior under different vertical and horizontal loading conditions and also internal stresses in different layers are acceptable. Also, as a result, the initial stiffness and overall area of the curves increase, as friction coefficients of the cores increase, although the frictional coefficients must be within a certain range.

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.3
• /
• pp.14-18
• /
• 2008

This paper deals with the conceptual design and characteristic analysis of core type superconducting motor using iron cores in the field. As the objective function of conceptual design, the flux quantity per pole is selected. In order to reduce the quantity of superconductors, the variations of flux quantity per pole by changing the design variables and area are investigated. Finally, the quantity of superconductors between air-cored and core type superconducting motor is compared under the same motor capacity. In addition, the dimensions and volumes of motors are compared.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2931-2934
• /
• 2003

This paper has been studied the electronic ballast by the self-oscillated inverter. The self-oscillated ballast can reduce the stress of the switch of the inverter. But the self-oscillating method is not easy to analyze and design. There arc three kinds of cores for the oscillating transformer： Ring core, EI-core, and Drum core. In this paper, we are studied the characteristics of three kinds of cores in using electronic ballast by the self-oscillated inverter.