• Ocean and Polar Research
• /
• v.32 no.1
• /
• pp.15-22
• /
• 2010

Calcium carbonate ($CaCO_3$) content was measured from 3 box core (BC060301, BC060303, BC070301) sediments, in addition to pilot core (PC313) sediments, from deep waters within the Western Pacific Ocean. At the two collection sites (BC060301, PC313) located close to the equator, downcore variation exhibited low $CaCO_3$ content during the interglacial period and high $CaCO_3$ content during the glacial period. Variation of coarse fraction (>$63\;{\mu}m$) content also followed changes in $CaCO_3$ content, indicating that dissolution effect of bottom water decreased during the glacial period. Such variation pattern is typical of the Pacific Ocean. However, downcore variation at the two collection sites (BC060303, BC070301) in the Philippine Sea contrasted the trend of the previous two cores (i.e., high $CaCO_3$ content during the interglacial period and low during the glacial period). This pattern is typical of the Atlantic Ocean. Such results may be attributed to the increasing dilution effect, initiated possibly by the increased transportation of terrigenous materials from nearby continent and archipelago during the glacial period when sea level was low. Alternatively, it is possible that the non-carbonate biogenic particles may have been responsible for dilution. Because of these uncertainties, the record of $CaCO_3$ variation in the deep Western Pacific Ocean is not regionally consistent.

• Advances in environmental research
• /
• v.4 no.4
• /
• pp.247-262
• /
• 2015

The few lignin biomarker studies conducted in tropical environments are hampered by having to use references signatures established for plants and soils characteristic of the temperate zone. This study presents a lignin biomarker analysis (vanillyls (V), p-hydroxyls (P), syringyls (S), cinnamyls (C)) of the dominant plant species and soil horizons as well as an analysis of the interrelated terrigenous organic matter (TOM) dynamics between vegetation and soil of the $Tapaj{\acute{o}}s$ river region, an active colonization front in the Brazilian Amazon. We collected and analyzed samples from 17 fresh dominant plant species and 48 soil cores at three depths (0-5 cm, 20-25 cm, 50-55 cm) from primary rainforest, fallow forest, subsistence agriculture fields and pastures. Lignin signatures in tropical plants clearly distinguish from temperate ones with high ratios of Acid/aldehyde of vanillyls ((Ad/Al)v) and P/V+S. Contrary to temperate environments, similarly high ratios in tropical soils are not related to TOM degradation along with pedogenesis but to direct influence of plants growing on them. Lignin signatures of both plants and soils of primary rainforest and fallow forest clearly distinguish from those of non-forested areas, i.e., agriculture fields and pastures. Attalea speciosa Palm trees, an invasive species in all perturbed landscapes of the Amazon, exhibit lignin signatures clearly distinct from other dominant plant species. The study of lignin signatures in tropical areas thus represents a powerful tool to evaluate the impact of primary rainforest clearing on TOM dynamics in tropical areas.

• The Journal of the Korea Contents Association
• /
• v.18 no.4
• /
• pp.178-185
• /
• 2018

Recently, demands for computer systems with multicore CPUs and high-performance flash-based storage devices (i.e., flash SSD) have rapidly grown in cloud computing, surer-computing, and enterprise storage/database systems. Journaling file systems running on high-performance systems do not exploit the full I/O bandwidth of high-performance SSDs. In this article, we evaluate and analyze the performance of the Linux EXT4 file system with high-performance SSDs and multicore CPUs. The system used in this study has 72 cores and Intel NVMe SSD, and the flash SSD has performance up to 2800/1900 MB/s for sequential read/write operations. Our experimental results show that checkpointing in the EXT4 file system is a major overhead. Furthermore, we optimize the checkpointing procedure and our optimized EXT4 file system shows up to 92% better performance than the original EXT4 file system.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.4
• /
• pp.43-52
• /
• 2017

This study analyzed pore water pressure, earth pressure and settlement through laboratory model tests in order to suggest the effective remodeling method in the case of reinforcing the upstream and downstream slope of deteriorated reservoirs that has no cores and filters or is not functional. The method of remodeling the upstream slope using dredge soil is first prevent seepage by installing the core, and the leakage water can be rapidly discharged through a filter installed on the downstream slope. Therefore, it is considered a highly efficient method of remodeling that reduces piping phenomena and increasing the storage capacity of the reservoir. The variation of earth pressure without the core and filter was greater than with it, while the change largely showed in the upstream slope, the downstream slope did not show any significant changes. The remodeling method of the downstream slope with the core appeared differently pore water pressure depending on the presence of the vertical and horizontal filters. In the upstream slope, the pore water pressure rises sharply, the base and middle gradually increased, and the downstream slope appeared small. The pore water pressure of embankment with a vertical and horizontal filter will be smaller than without it. The remodeling of deteriorated reservoir that does not have the function of the filter, the vertical filter must be installed in a position that is higher than the expected seepage line by removing portions of the downstream slopes. Since the horizontal filter is an important structure that provides stable drainage during an earthquake or concentrated leak, it is necessary to examine any change in the seepage characteristics depending on the filter intervals via three-dimensional finite element analysis, and it should be connected to the tow-drain to reduce the possibility of the collapse of the reservoir.

• Journal of Astronomy and Space Sciences
• /
• v.31 no.4
• /
• pp.335-340
• /
• 2014

There have been many suggestions and much debate about climate variability during the Holocene. However, their complex forcing factors and mechanisms have not yet been clearly identified. In this paper, we have examined the Holocene climate cycles and features based on the wavelet analyses of $^{14}C$, $^{10}Be$, and $^{18}O$ records. The wavelet results of the $^{14}C$ and $^{10}Be$ data show that the cycles of ~2180-2310, ~970, ~500-520, ~350-360, and ~210-220 years are dominant, and the ~1720 and ~1500 year cycles are relatively weak and subdominant. In particular, the ~2180-2310 year periodicity corresponding to the Hallstatt cycle is constantly significant throughout the Holocene, while the ~970 year cycle corresponding to the Eddy cycle is mainly prominent in the early half of the Holocene. In addition, distinctive signals of the ~210-220 year period corresponding to the de Vries cycle appear recurrently in the wavelet distribution of $^{14}C$ and $^{10}Be$, which coincide with the grand solar minima periods. These de Vries cycle events occurred every ~2270 years on average, implying a connection with the Hallstatt cycle. In contrast, the wavelet results of $^{18}O$ data show that the cycles of ~1900-2000, ~900-1000, and ~550-560 years are dominant, while the ~2750 and ~2500 year cycles are subdominant. The periods of ~2750, ~2500, and ~1900 years being derived from the $^{18}O$ records of NGRIP, GRIP and GISP2 ice cores, respectively, are rather longer or shorter than the Hallstatt cycle derived from the $^{14}C$ and $^{10}Be$ records. The records of these three sites all show the ~900-1000 year periodicity corresponding to the Eddy cycle in the early half of the Holocene.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.12
• /
• pp.968-972
• /
• 2009

The multi-core processors are being widely exploited by many high-end systems. With significant advances in processor architecture, the network band-width required on the high-end systems is increasing drastically. It is therefore highly desirable to manage multiple cores efficiently to achieve high network band-width with minimum resource requirements. Modern operating systems, however, still have significant design and optimization space to leverage the network performance over multi-core systems. In this paper, we suggest a novel networking process scheduling scheme, which decides the best processor affinity of networking processes based on the processor cache layout, communication intensiveness, and processor loads. The experimental results show that the scheduling scheme implemented in the Linux kernel can improve the network bandwidth and the effectiveness of processor utilization by 20% and 59%, respectively.

• Journal of Computing Science and Engineering
• /
• v.7 no.4
• /
• pp.285-299
• /
• 2013

To enable hard real-time systems to take advantage of multicore processors, it is crucial to obtain the worst-case execution time (WCET) for programs running on multicore processors. However, this is challenging and complicated due to the inter-thread interferences from the shared resources in a multicore processor. Recent research used the combined cache conflict graph (CCCG) to model and compute the worst-case inter-thread interferences on a shared L2 cache in a multicore processor, which is called the CCCG-based approach in this paper. Although it can compute the WCET safely and accurately, its computational complexity is exponential and prohibitive for a large number of cores. In this paper, we propose three counter-based approaches to significantly reduce the complexity of the multicore WCET analysis, while achieving absolute safety with tightness close to the CCCG-based approach. The basic counter-based approach simply counts the worst-case number of cache line blocks mapped to a cache set of a shared L2 cache from all the concurrent threads, and compares it with the associativity of the cache set to compute the worst-case cache behavior. The enhanced counter-based approach uses techniques to enhance the accuracy of calculating the counters. The hybrid counter-based approach combines the enhanced counter-based approach and the CCCG-based approach to further improve the tightness of analysis without significantly increasing the complexity. Our experiments on a 4-core processor indicate that the enhanced counter-based approach overestimates the WCET by 14% on average compared to the CCCG-based approach, while its averaged running time is less than 1/380 that of the CCCG-based approach. The hybrid approach reduces the overestimation to only 2.65%, while its running time is less than 1/150 that of the CCCG-based approach on average.

• KIISE Transactions on Computing Practices
• /
• v.23 no.8
• /
• pp.459-465
• /
• 2017

Although the performance of computer hardware is increasing due to the development of manycore technologies, software lacking a proportional increase in throughput. Functional languages can be a viable alternative to improve the performance of parallel programs since such languages have an inherent parallelism in evaluating pure expressions without side-effects. Specifically, Haskell is notably popular for parallel programming because it provides easy-to-use parallel constructs based on monads. However, the scalability of parallel programs in Haskell tends to fluctuate as the number of cores increases, and the garbage collector is suspected to be the source of this fluctuations because it affects both the space and the time needed to execute the programs. This paper uses the tuning tool, GC-Tune, to improve the scalability of the performance. Our experiment was conducted with a parallel plagiarism detection program, and the scalability improved. Specifically, the fluctuation range of the speedup was narrowed down by 39% compared to the original execution of the program without any tuning.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.87-93
• /
• 2001

Velocity anisotropy of unconsolidated sediments in the Ulleung Basin, East Sea were studied by using 22 piston cores. Velocity anisotropy shows about 0.4 and 1.2％ in the Plain and Slope sediments, respectively. Horizontal velocity is greater than vertical velocity. It is resulted in positive anisotropy. Thus, bedding must be regarded as the principal cause of acoustic anisotropy in the Ulleung Basin sediments. The differences of the value are different from 5 m/s to 18 m/s in the Plain and Slope area, respectively. The relationships between physical properties and velocity anisotropy are clearly grouped. This result suggests that the slope sediments are probably affected by sedimentological (esp. physical properties) changes resulting from diagenesis.

• Ocean and Polar Research
• /
• v.36 no.4
• /
• pp.319-326
• /
• 2014

Mineral dust in the polar snow plays an important role both in the climate system of the Earth and in global biogeochemical cycles. Analysis of the concentration and the particle size distribution of mineral dust has been carried out in the snow from the Antarctic surface snow and the Greenland snowpit. Among the various particle size determination techniques, a Multisizer 3 Coulter Counter in a class 100 clean bench counted all particles between 1.1 and $30.0{\mu}m$ with a $50{\mu}m$ aperture tube. The aperture tube size, the concentration of electrolytes and the accuracy of the particle size distribution were determined in this study. The number concentrations from the Antarctic surface snow were 81,843 particles $mL^{-1}$, but those from the Greenland snowpit were 10,666 particles $mL^{-1}$. In the volume distribution, the distributions of mineral dust in both the Antarctic surface snow and the Greenland snowpit showed lognormal distribution in the size interval 1.1 to $6.0{\mu}m$ with the mode, 3.562 and $3.836{\mu}m$, respectively. The analysis technique using a coulter counter for mineral dust could be used for reconstructing paleoclimates from polar ice cores.