• Steel and Composite Structures
• /
• v.50 no.5
• /
• pp.583-594
• /
• 2024

In this paper, a Guided Simulated Annealing (GSA) algorithm is presented to optimize 2D and 3D steel frames against Progressive Collapse. Considering the nature of structural optimization problems, a number of restrictions and improvements have been applied to the decision mechanisms of the algorithm without harming the randomness. With these improvements, the algorithm aims to focus relatively on the flawed variables of the analyzed frame. Besides that, it is intended to be more rational by instituting structural constraints on the sections to be selected as variables. In addition to the LRFD restrictions, the alternate path method with nonlinear dynamic procedure is used to assess the risk of progressive collapse, as specified in the US Department of Defense United Facilities Criteria (UFC) Design of Buildings to Resist Progressive Collapse. The entire optimization procedure was carried out on a C# software that supports parallel processing developed by the authors, and the frames were analyzed in SAP2000 using OAPI. Time history analyses of the removal scenarios are distributed to the processor cores in order to reduce computational time. The GSA produced 3% lighter structure weights than the SA (Simulated Annealing) and 4% lighter structure weights than the GA (Genetic Algorithm) for the 2D steel frame. For the 3D model, the GSA obtained 3% lighter results than the SA. Furthermore, it is clear that the UFC and LRFD requirements differ when the acceptance criteria are examined. It has been observed that the moment capacity of the entire frame is critical when designing according to UFC.

• Advances in nano research
• /
• v.17 no.1
• /
• pp.9-18
• /
• 2024

This paper presents the development of an educational management model for analyzing the dynamic instability of nanocomposite sandwich beams. The model aims to provide a comprehensive framework for understanding the behavior of sandwich micro beams with foam cores, featuring top and bottom layers made of smart and porous functionally graded materials (FGM) nanocomposites. The bottom layer is influenced by an external electric field, and the entire beam is supported by a visco-Pasternak foundation, accounting for spring, shear, and damping constants. Using the Kelvin-Voigt theory to model structural damping and incorporating size effects based on strain gradient theory, the model employs the parabolic shear deformation beam theory (PSDBT) to derive motion equations through Hamilton's principle. The differential quadrature method (DQM) is applied to solve these equations, accurately identifying the improvement in student understanding (ISU) of the beams. The impact of various parameters, including FGM properties, external voltage, geometric constants, and structural damping, on the DIR is thoroughly examined. The educational model is validated by comparing its outcomes with existing studies, highlighting the increase in ISU with the application of negative external voltage to the smart layer. This model serves as a valuable educational tool for engineering students and researchers studying the dynamic stability of advanced nanocomposite structures.

• Journal of the korean society of oceanography
• /
• v.33 no.3
• /
• pp.80-89
• /
• 1998

Three cores were taken from the northwest Pacific Ocean (Shikoku Basin) to determine the accumulation rates of both biogenic and terrigeneous fractions since the last penultimate interglacial period. The sediment is characterized by large amounts of terrigenous materials with low biogenic fractions and intermittent volcanic-ash layers, suggesting a hemipelagic origin. Composition of major elements shows no significant differences among sites. Relatively small variation of TiO$_2$/Al$_2$O$_3$ ratios with respect to SiO$_2$ content is the strong evidence for the common origin of terrigenous materials. The fraction of biogenic carbonates varies from near 0% in ash layers to about 35%, with a gradual increase toward the south (St. 4 through St. 6 to St. 20). However, carbonate contents show step-wise increasing tendency from St. 4 through St. 6 to St. 20, which suggests a southward increase of carbonate production. The color reflectance indicates that the sediment of the southern sites contains relatively higher amounts of biogenic carbonates. The mass accumulation rate of terrigenous fractions during the glacial period was 2-3 times higher than that of interglacial period. This enhanced mass accumulation rate of terrigenous materials was concomitant with the high accumulation rate of biogenic fractions. The total sediment accumulation rate is considered as the most important factor controlling mass accumulation rates of the biogenic and terrigenous materials. The enhanced sediment accumulation during the glacial periods is interpreted as a consequence of climate-induced change in the supply of eolian dust from the Asian continent. Enhanced wind strength during the glacial time may have increased transportation of terrigenous materials to the ocean. Thus, variation of sediment accumulation is highly linked with climatic variations.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.122-127
• /
• 2006

A series of conductive filler were prepared with electroless plating method. Base conductive materials of the filler were nickel and copper. The cores were prepared with Nylon 6 and rayon in different aspect ratio. Also, various complexes were made with ABS resin and conductive filler with different filler feed ratio. The conductivity of the filler was measured with conductivity analyzer and the size distributions of fillers was measured with laser particle size analyzer. Electromagnetic wave shielding efficiency of each complex film was measured with flange circular coaxial transmission line sample holder within the 1MHz$\sim$1GHz bandwidth range. From this study, the conductivity of filers surpass that of other carbon films. It is available that the filler made of fibrous materials can be applied in plastic molding industry of electric appliances as a EMI filler.

• Geophysics and Geophysical Exploration
• /
• v.8 no.4
• /
• pp.237-242
• /
• 2005

A seismic refraction study in estimation of depth to the bedrock demonstrates that 1) the average velocity in the medium is about 250 m/s in the surface layer (< 4 m), 2,500 m/s in the weathered formation, and greater than 3,000 m/s in the bedrock, 2) the depth to the deepest reflector assumed to be the bedrock is about 17 m; however, according to the cores collected in a borehole in study area, the bedrock (granite) occurred at depth 25 m, 3) according to the density and velocity logging, at depth 17 m, a measurable velocity and density increase are observed, and 4) the velocity of the weathered formation is relatively high and therefore, the acquisition offsets ($70{\sim}80m$) are turned out not to be long enough to record the refracted signal from the bedrock at depth 25 m as first arrivals.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.240-247
• /
• 2012

Marginal and internal fit is an important part of the longevity of dental restorations. The purpose of this study was to analysis the marginal and internal fit of zirconia core by dental CAD/CAM system using innovative and non-destructive methods such as optical coherence tomography(OCT) and compare with conventional method such as silicone replica technique(SRT). Ten dental stone models of abutment of maxillary right central incisal were manufactured and scanned. Ten zirconia cores were fabricated with commercial CAD/CAM system. To measure the marginal and internal fit of each sample, five point of fitness were measured using 2 different methods(OCT and SRT). Statistical analysis was performed using independent sample t-test(${\alpha}$=0.05). OCT and SRT groups were not significantly different(P>0.05). By this results, analysis the fitness of dental restorations using OCT were acceptable measuring method.

• Journal of Korean Society for Quality Management
• /
• v.39 no.1
• /
• pp.78-89
• /
• 2011

A study for service quality is actively done but that for the quality level of the provided service recognized by the service provider for the same service, and for the difference in quality level of service use recognized by the service user is not relatively widely done. Thus, this study analyzed difference between the quality level of the provided service recognized by the service provider and the quality level of service use recognized by the service user, around administrative service as one of cores of the university service, and examined how difference between both service qualities have effect on business the business satisfaction level of the service provider. We measured the service level provided by the individual in charge of the administrative service of the A-university and examined the service quality in business by use of questionnaires. As the result, it was appeared that the quality level of the provided service recognized by the service provider for the same service quality was higher than the quality level of service use recognized by the service user. In addition, it was found that the quality level of the provided service recognized by the service provider had a significant effect on the service provider's business satisfaction level but the quality level of service use recognized by the service user had not effect on the business satisfaction level of the provider.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.1
• /
• pp.60-69
• /
• 2016

Complicated crown-root fracture of permanent incisors cause esthetic, functional, and psychological problems to patients. Therefore, treatment is important and multidisciplinary treatment is required. This case report describes the clinical procedures involved in the treatment of trauma-induced complicated crown-root fractures in the maxillary incisor of two young patients. Conventional root canal treatment and apexification were performed in each patient. To expose the fracture margins to the supragingival level and to reestablish the biologic width, orthodontic extrusions with fixed appliances were performed followed by a retention period. During the retention period, fiber-optic posts and cores were built up and provisional crowns were placed. Finally, ceramic crowns manufactured using a computer-aided design/computer-aided manufacturing (CAD/CAM) system were placed. In both patients, the teeth presented satisfactory functional and esthetic outcomes without relapse. The periodontal tissues were healthy.

• Journal of the Korean association of regional geographers
• /
• v.21 no.3
• /
• pp.593-607
• /
• 2015

This study examined the Holocene environmental changes by OSL dating and magnetic susceptibility (MS) in 12 sediment cores from estuarine tidal flat, Mosan Bay Estuary, west coast of Korea. For the complexity of the geomorphic characteristics of estuaries, it is difficult to obtain a series of data. The following significant results were derived using relatively simple methods. First, MS data shows sensitive changes in pattern according to the precipitation change during mid to late Holocene. Second, MS data show periodicity of 250 yr. when they were wavelet transformed. This periodicity is related with the intensifying of solar intensity, the East Asian Summer Monsoon and ENSO. Thus, MS data from estuarine sediments are valuable data which can explain mechanism of climate change in East Asia and worthy as proxy data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4545-4553
• /
• 2014

Mobile GPU has led to the rapid development of smart phone graphic technology. Most recent smart phones are equipped with high-performance multi-core GPU. How a multi-core mobile GPU can be utilized efficiently will be a critical issue for improving the smart phone performance. On the other hand, most current research has focused on a single-core mobile GPU; studies of multi-core mobile GPU are rare. In this paper, the job scheduling patterns and the efficiency of multi-core mobile GPU are analyzed. In the profiling result, despite the higher number of GPU cores, the total processing time required for certain graphics applications were increased. In addition, when GPU is processing for 3D games, a substantial amount of overhead is caused by communication between not only the CPU and GPU, but also within the GPUs. These results confirmed that more active research for multi-core mobile GPU should be performed to optimize the present mobile GPUs.